TvLibrary.TvException: Unable to add unable to connect audio compressor->muxer (1 Viewer)

epsilon2

Portal Member
February 27, 2012
43
0
49
Home Country
Germany Germany
system:
fresh i5 install
SBS 2011
8 Gig
MP 1.2.2

error log:

Code:
2012-04-18 16:52:50.417391 [(20)]: Exception  :TvLibrary.TvException: Unable to add unable to connect audio compressor->muxer
  bei TvLibrary.Implementations.Analog.Components.Encoder.AddAnalogMuxer(IFilterGraph2 _graphBuilder)
  bei TvLibrary.Implementations.Analog.Components.Encoder.CreateFilterInstance(IFilterGraph2 _graphBuilder, Tuner _tuner, TvAudio _tvAudio, Crossbar _crossbar, Capture _capture)
  bei TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
 
2012-04-18 16:52:50.479791 [(20)]: Exception  :TvLibrary.TvExceptionGraphBuildingFailed: Graph building failed ---> TvLibrary.TvException: Unable to add unable to connect audio compressor->muxer
  bei TvLibrary.Implementations.Analog.Components.Encoder.AddAnalogMuxer(IFilterGraph2 _graphBuilder)
  bei TvLibrary.Implementations.Analog.Components.Encoder.CreateFilterInstance(IFilterGraph2 _graphBuilder, Tuner _tuner, TvAudio _tvAudio, Crossbar _crossbar, Capture _capture)
  bei TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
  --- Ende der internen Ausnahmestapelüberwachung ---
  bei TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
  bei TvLibrary.Implementations.Analog.TvCardAnalog.Tune(Int32 subChannelId, IChannel channel)
  bei TvLibrary.Implementations.Hybrid.HybridCardGroup.Tune(Int32 subChannelId, IChannel channel)
  bei TvLibrary.Implementations.Hybrid.HybridCard.Tune(Int32 subChannelId, IChannel channel)
  bei TvService.CardTuner.Tune(IUser& user, IChannel channel, Int32 idChannel)
 
2012-04-18 16:52:50.479791 [Analog TV scan thread(10)]: analog: DoTvScan error (missing software encoder)

ErrorBox: Unable to scan: The graph building

On a E-350 all was fine with ATI Encoders. Now i Use MainConcept Video/ LAME III Audio Encoder. Both mentioned in grapfedit.

Any Help?
 

epsilon2

Portal Member
February 27, 2012
43
0
49
Home Country
Germany Germany
Code:
2012-04-18 17:23:04.377727 [(16)]: Stopcard
2012-04-18 17:23:04.377727 [(16)]: tvcard:FreeAllSubChannels
2012-04-18 17:23:04.377727 [(16)]: Controller: epg start
2012-04-18 17:23:06.686527 [(16)]: analog: build graph
2012-04-18 17:23:06.702127 [(16)]: analog: AddTvTunerFilter Hauppauge WinTV 885 Tuner
2012-04-18 17:23:06.702127 [(16)]: analog: Using stored capabilities of the tuner
2012-04-18 17:23:06.702127 [(16)]: analog: Using Crossbar configuration from stored graph
2012-04-18 17:23:06.702127 [(16)]: analog: AddCrossBarFilter use:Hauppauge WinTV 885 Crossbar 0
2012-04-18 17:23:06.702127 [(16)]: analog: AddCrossBarFilter succeeded
2012-04-18 17:23:06.702127 [(16)]: analog: Using Crossbar configuration from stored graph succeeded
2012-04-18 17:23:06.702127 [(16)]: analog: Using TvAudio configuration from stored graph
2012-04-18 17:23:06.702127 [(16)]: analog: AddTvAudioFilter use:Hauppauge WinTV 885 TvAudio 0
2012-04-18 17:23:06.702127 [(16)]: analog: AddTvAudioFilter succeeded:Hauppauge WinTV 885 TvAudio
2012-04-18 17:23:06.702127 [(16)]: analog: Using TvAudio configuration from stored graph succeeded
2012-04-18 17:23:06.702127 [(16)]: analog: Using Capture configuration from stored graph
2012-04-18 17:23:06.717727 [(16)]: analog: AddTvCaptureFilter try:Hauppauge WinTV 885 Video Capture 0
2012-04-18 17:23:06.717727 [(16)]: analog: AddTvCaptureFilter connected video to crossbar successfully
2012-04-18 17:23:06.717727 [(16)]: analog: AddTvCaptureFilter connected audio to crossbar successfully
2012-04-18 17:23:06.842527 [(16)]: Set new video format to: PAL_B
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Brightness to value: 3
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Contrast to value: 125
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Hue to value: 0
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Saturation to value: 128
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Sharpness to value: 3
2012-04-18 17:23:06.842527 [(16)]: Set Framerate to 25 succeeded
2012-04-18 17:23:06.842527 [(16)]: Set Framesize to 720x576 succeeded
2012-04-18 17:23:06.842527 [(16)]: analog: Using Capture configuration from stored graph succeeded
2012-04-18 17:23:06.842527 [(16)]: analog: SetupTeletext()
2012-04-18 17:23:06.858127 [(16)]: analog: Using Teletext-Component configuration from stored graph
2012-04-18 17:23:06.858127 [(16)]: analog:Using teletext component - VBI Codec
2012-04-18 17:23:06.858127 [(16)]: analog: teletext setup
2012-04-18 17:23:06.858127 [(16)]: analog:connect wst/vbi codec->tsfilesink
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: True - MPEG2ProgramFilter: True
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: False - MPEG2ProgramFilter: True
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: True - MPEG2ProgramFilter: False
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: False - MPEG2ProgramFilter: False
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.858127 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.873727 [(16)]: analog: AddTvMultiPlexer no multiplexer devices found
2012-04-18 17:23:06.873727 [(16)]: analog: AddTvMultiPlexer no multiplexer devices found
2012-04-18 17:23:06.873727 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.873727 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.873727 [(16)]: analog: FindAudioVideoPins
2012-04-18 17:23:06.873727 [(16)]: analog:  find pins on capture filter
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin pin:#1 name:Audio Out [29/0] Direction:Output Connected:False
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin  major:73647561-0000-0010-8000-00aa00389b71 sub:00000001-0000-0010-8000-00aa00389b71
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin succeeded
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin pin:#0 name:Capture [31/0] Direction:Output Connected:False
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin  major:73646976-0000-0010-8000-00aa00389b71 sub:32595559-0000-0010-8000-00aa00389b71
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin succeeded
2012-04-18 17:23:06.873727 [(16)]: analog: AddAudioCompressor name:Audio Out [31/0] Direction:Output Connected:False
2012-04-18 17:23:06.873727 [(16)]: analog: AddAudioCompressor found:13 compressor
2012-04-18 17:23:06.889327 [(16)]: analog:  compressor LAME Audio Encoder is usable
2012-04-18 17:23:06.889327 [(16)]: analog:  try compressor:LAME Audio Encoder
2012-04-18 17:23:06.889327 [(16)]: analog:  connect audio pin->audio compressor
2012-04-18 17:23:06.889327 [(16)]: analog: AddVideoCompressor
2012-04-18 17:23:06.889327 [(16)]: analog: AddVideoCompressor found:12 compressor
2012-04-18 17:23:06.889327 [(16)]: analog:  compressor MainConcept ProDV Codec 3.0.16 is usable
2012-04-18 17:23:06.889327 [(16)]: analog:  try compressor:MainConcept ProDV Codec 3.0.16
2012-04-18 17:23:06.889327 [(16)]: analog:  connect video pin->video compressor
2012-04-18 17:23:06.889327 [(16)]: analog:AddAnalogMuxer
2012-04-18 17:23:06.889327 [(16)]: analog:unable to connect audio compressor->muxer returns:0x80040217
2012-04-18 17:23:06.889327 [(16)]: analog:Dispose()
2012-04-18 17:23:06.889327 [(16)]: tvcard:FreeAllSubChannels
2012-04-18 17:23:06.904927 [(16)]: Remove filter from graph: Analog MPEG Muxer
2012-04-18 17:23:06.904927 [(16)]: Remove filter from graph: MainConcept ProDV Codec 3.0.16
2012-04-18 17:23:06.904927 [(16)]: Remove filter from graph: LAME Audio Encoder
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: VBI Codec
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Tee/Sink-to-Sink-Konvertierung
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 Video Capture
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 Crossbar
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 TvAudio
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 Tuner
2012-04-18 17:23:06.967327 [(16)]: analog:All filters removed
2012-04-18 17:23:06.967327 [(16)]: analog: removing instance of compressor MainConcept ProDV Codec 3.0.16 from use
2012-04-18 17:23:06.967327 [(16)]: analog: compressor is no longer in use
2012-04-18 17:23:06.967327 [(16)]: analog: removing instance of compressor LAME Audio Encoder from use
2012-04-18 17:23:06.967327 [(16)]: analog: compressor is no longer in use
2012-04-18 17:23:06.967327 [(16)]: analog: dispose completed
2012-04-18 17:23:07.076527 [SetupTv(1)]: TCP connect took : 69
2012-04-18 17:23:07.076527 [(20)]: Controller: epg start

I have no mediaportal.log but a tv.log which i post above.

Never though it is such complicate.
 

Vasilich

Portal Pro
August 30, 2009
3,394
1,170
Germany, Mayence
Home Country
Russian Federation Russian Federation
as you don't read my posts carefully and don't really answer my questions, i will answer in your style:
2012-04-18 17:23:06.889327 [(16)]: analog:unable to connect audio compressor->muxer returns:0x80040217
so your lame encoder is incompatible with used muxer "Analog MPEG Muxer".

insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (12,1,'InterVideo Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (13,2,'Ulead MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (14,3,'MainConcept MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (15,4,'MainConcept Demo MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (16,5,'CyberLink Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (17,6,'CyberLink Audio Encoder(Twinhan)',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (18,7,'Pinnacle MPEG Layer-2 Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (19,8,'MainConcept (Hauppauge) MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (20,9,'NVIDIA Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (21,10,'MainConcept (HCW) Layer II Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (22,11,'CyberLink MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (23,12,'ATI MPEG Audio Encoder',1);
i don't see lame audio encoder here as supported audio encoder, so try to install one of supported ones.
 

Users who are viewing this thread

Similar threads

To be fair the normal uninstall is usually more than sufficient. I regularly uninstall and reinstall MP 1 as part of the testing process and only very rarely have I needed to use the manual procedure posted by @CyberSimian to overcome the error you ran into. I also believe there is a procedure to repair the MySQL install in the event...
To be fair the normal uninstall is usually more than sufficient. I regularly uninstall and reinstall MP 1 as part of the testing...
I am trying to install Mediaportal with TV Server. I tried many versions, including current x64 and new prerelease x86, and...
Replies
3
Views
562
Hi, First off: there are some issues with the latest Mediaportal (32bits vs 64bits), so that is one of the issues you're stumbling with. If you take the previous version (1.31) it should work as expected. For IPTV there is also a different option (with different pros and cons): Onlinevideos. I'm using that sometimes for my IPTV as...
Hi, First off: there are some issues with the latest Mediaportal (32bits vs 64bits), so that is one of the issues you're stumbling...
Hi I am trying to play a m3u file from my IPTV provider, but when I try to install the TV part of Media Portal v1.3.2 I get an...
Replies
1
Views
689
That fixed the problem. I just manually installed VC_redist.x64.exe and reinstalled 1.32 64-bit. Thanks for that. A couple of things; the deployment tool for 1.32 doesn't remove the previous version when you're updating from 1.31 to 1.32 and "MediaPortal TV Server" gets installed even when you choose to install the client only. I...
That fixed the problem. I just manually installed VC_redist.x64.exe and reinstalled 1.32 64-bit. Thanks for that. A couple of...
I have performed client installations of 1.32 64-Bit on four machines using the central configuration setup on Windows 10 Pro...
Replies
2
Views
651
I removed all sign of MySQL, rebooted, did a clean reinstall. It reinstalled 5.6, But I've still got both the same problem - unable to connect to any of the specified MySQL hosts. And Hostname is still in red. I don't understand - this is a dedicated TV computer. Unless an update did this I don't know why there's a problem in the...
I removed all sign of MySQL, rebooted, did a clean reinstall. It reinstalled 5.6, But I've still got both the same problem -...
I've been using MediaPortal for 20 or so years. Last night it recorded perfectly. This arvo it doesn't - will run videos but not...
Replies
2
Views
475
Good. I am pleased that that is now working for you. :) If you have ever looked at MP debug log files, you may have noticed that apparent errors are not rare, but these are "errors" that do not affect the functioning of the product. (It is not desirable to have these errors in the log file, as it misleads users, testers, and...
Good. I am pleased that that is now working for you. :) If you have ever looked at MP debug log files, you may have noticed that...
Hi, I am reinstalling MediaPortal 1.13 on a new W10 64Bit computer. In need to use this old version because of TVWishlist. So my...
Replies
10
Views
1K
Top Bottom