TvLibrary.TvException: Unable to add unable to connect audio compressor->muxer (1 Viewer)

epsilon2

Portal Member
February 27, 2012
43
0
49
Home Country
Germany Germany
system:
fresh i5 install
SBS 2011
8 Gig
MP 1.2.2

error log:

Code:
2012-04-18 16:52:50.417391 [(20)]: Exception  :TvLibrary.TvException: Unable to add unable to connect audio compressor->muxer
  bei TvLibrary.Implementations.Analog.Components.Encoder.AddAnalogMuxer(IFilterGraph2 _graphBuilder)
  bei TvLibrary.Implementations.Analog.Components.Encoder.CreateFilterInstance(IFilterGraph2 _graphBuilder, Tuner _tuner, TvAudio _tvAudio, Crossbar _crossbar, Capture _capture)
  bei TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
 
2012-04-18 16:52:50.479791 [(20)]: Exception  :TvLibrary.TvExceptionGraphBuildingFailed: Graph building failed ---> TvLibrary.TvException: Unable to add unable to connect audio compressor->muxer
  bei TvLibrary.Implementations.Analog.Components.Encoder.AddAnalogMuxer(IFilterGraph2 _graphBuilder)
  bei TvLibrary.Implementations.Analog.Components.Encoder.CreateFilterInstance(IFilterGraph2 _graphBuilder, Tuner _tuner, TvAudio _tvAudio, Crossbar _crossbar, Capture _capture)
  bei TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
  --- Ende der internen Ausnahmestapelüberwachung ---
  bei TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
  bei TvLibrary.Implementations.Analog.TvCardAnalog.Tune(Int32 subChannelId, IChannel channel)
  bei TvLibrary.Implementations.Hybrid.HybridCardGroup.Tune(Int32 subChannelId, IChannel channel)
  bei TvLibrary.Implementations.Hybrid.HybridCard.Tune(Int32 subChannelId, IChannel channel)
  bei TvService.CardTuner.Tune(IUser& user, IChannel channel, Int32 idChannel)
 
2012-04-18 16:52:50.479791 [Analog TV scan thread(10)]: analog: DoTvScan error (missing software encoder)

ErrorBox: Unable to scan: The graph building

On a E-350 all was fine with ATI Encoders. Now i Use MainConcept Video/ LAME III Audio Encoder. Both mentioned in grapfedit.

Any Help?
 

epsilon2

Portal Member
February 27, 2012
43
0
49
Home Country
Germany Germany
Code:
2012-04-18 17:23:04.377727 [(16)]: Stopcard
2012-04-18 17:23:04.377727 [(16)]: tvcard:FreeAllSubChannels
2012-04-18 17:23:04.377727 [(16)]: Controller: epg start
2012-04-18 17:23:06.686527 [(16)]: analog: build graph
2012-04-18 17:23:06.702127 [(16)]: analog: AddTvTunerFilter Hauppauge WinTV 885 Tuner
2012-04-18 17:23:06.702127 [(16)]: analog: Using stored capabilities of the tuner
2012-04-18 17:23:06.702127 [(16)]: analog: Using Crossbar configuration from stored graph
2012-04-18 17:23:06.702127 [(16)]: analog: AddCrossBarFilter use:Hauppauge WinTV 885 Crossbar 0
2012-04-18 17:23:06.702127 [(16)]: analog: AddCrossBarFilter succeeded
2012-04-18 17:23:06.702127 [(16)]: analog: Using Crossbar configuration from stored graph succeeded
2012-04-18 17:23:06.702127 [(16)]: analog: Using TvAudio configuration from stored graph
2012-04-18 17:23:06.702127 [(16)]: analog: AddTvAudioFilter use:Hauppauge WinTV 885 TvAudio 0
2012-04-18 17:23:06.702127 [(16)]: analog: AddTvAudioFilter succeeded:Hauppauge WinTV 885 TvAudio
2012-04-18 17:23:06.702127 [(16)]: analog: Using TvAudio configuration from stored graph succeeded
2012-04-18 17:23:06.702127 [(16)]: analog: Using Capture configuration from stored graph
2012-04-18 17:23:06.717727 [(16)]: analog: AddTvCaptureFilter try:Hauppauge WinTV 885 Video Capture 0
2012-04-18 17:23:06.717727 [(16)]: analog: AddTvCaptureFilter connected video to crossbar successfully
2012-04-18 17:23:06.717727 [(16)]: analog: AddTvCaptureFilter connected audio to crossbar successfully
2012-04-18 17:23:06.842527 [(16)]: Set new video format to: PAL_B
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Brightness to value: 3
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Contrast to value: 125
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Hue to value: 0
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Saturation to value: 128
2012-04-18 17:23:06.842527 [(16)]: Set VideoProcAmp - Sharpness to value: 3
2012-04-18 17:23:06.842527 [(16)]: Set Framerate to 25 succeeded
2012-04-18 17:23:06.842527 [(16)]: Set Framesize to 720x576 succeeded
2012-04-18 17:23:06.842527 [(16)]: analog: Using Capture configuration from stored graph succeeded
2012-04-18 17:23:06.842527 [(16)]: analog: SetupTeletext()
2012-04-18 17:23:06.858127 [(16)]: analog: Using Teletext-Component configuration from stored graph
2012-04-18 17:23:06.858127 [(16)]: analog:Using teletext component - VBI Codec
2012-04-18 17:23:06.858127 [(16)]: analog: teletext setup
2012-04-18 17:23:06.858127 [(16)]: analog:connect wst/vbi codec->tsfilesink
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: True - MPEG2ProgramFilter: True
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: False - MPEG2ProgramFilter: True
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: True - MPEG2ProgramFilter: False
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter - MatchPinNames: False - MPEG2ProgramFilter: False
2012-04-18 17:23:06.858127 [(16)]: analog: AddTvEncoderFilter no encoder devices found
2012-04-18 17:23:06.858127 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.858127 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.873727 [(16)]: analog: AddTvMultiPlexer no multiplexer devices found
2012-04-18 17:23:06.873727 [(16)]: analog: AddTvMultiPlexer no multiplexer devices found
2012-04-18 17:23:06.873727 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.873727 [(16)]: analog: FinCapturePin - no filter???
2012-04-18 17:23:06.873727 [(16)]: analog: FindAudioVideoPins
2012-04-18 17:23:06.873727 [(16)]: analog:  find pins on capture filter
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin pin:#1 name:Audio Out [29/0] Direction:Output Connected:False
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin  major:73647561-0000-0010-8000-00aa00389b71 sub:00000001-0000-0010-8000-00aa00389b71
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin succeeded
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin pin:#0 name:Capture [31/0] Direction:Output Connected:False
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin  major:73646976-0000-0010-8000-00aa00389b71 sub:32595559-0000-0010-8000-00aa00389b71
2012-04-18 17:23:06.873727 [(16)]: analog: FindMediaPin succeeded
2012-04-18 17:23:06.873727 [(16)]: analog: AddAudioCompressor name:Audio Out [31/0] Direction:Output Connected:False
2012-04-18 17:23:06.873727 [(16)]: analog: AddAudioCompressor found:13 compressor
2012-04-18 17:23:06.889327 [(16)]: analog:  compressor LAME Audio Encoder is usable
2012-04-18 17:23:06.889327 [(16)]: analog:  try compressor:LAME Audio Encoder
2012-04-18 17:23:06.889327 [(16)]: analog:  connect audio pin->audio compressor
2012-04-18 17:23:06.889327 [(16)]: analog: AddVideoCompressor
2012-04-18 17:23:06.889327 [(16)]: analog: AddVideoCompressor found:12 compressor
2012-04-18 17:23:06.889327 [(16)]: analog:  compressor MainConcept ProDV Codec 3.0.16 is usable
2012-04-18 17:23:06.889327 [(16)]: analog:  try compressor:MainConcept ProDV Codec 3.0.16
2012-04-18 17:23:06.889327 [(16)]: analog:  connect video pin->video compressor
2012-04-18 17:23:06.889327 [(16)]: analog:AddAnalogMuxer
2012-04-18 17:23:06.889327 [(16)]: analog:unable to connect audio compressor->muxer returns:0x80040217
2012-04-18 17:23:06.889327 [(16)]: analog:Dispose()
2012-04-18 17:23:06.889327 [(16)]: tvcard:FreeAllSubChannels
2012-04-18 17:23:06.904927 [(16)]: Remove filter from graph: Analog MPEG Muxer
2012-04-18 17:23:06.904927 [(16)]: Remove filter from graph: MainConcept ProDV Codec 3.0.16
2012-04-18 17:23:06.904927 [(16)]: Remove filter from graph: LAME Audio Encoder
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: VBI Codec
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Tee/Sink-to-Sink-Konvertierung
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 Video Capture
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 Crossbar
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 TvAudio
2012-04-18 17:23:06.967327 [(16)]: Remove filter from graph: Hauppauge WinTV 885 Tuner
2012-04-18 17:23:06.967327 [(16)]: analog:All filters removed
2012-04-18 17:23:06.967327 [(16)]: analog: removing instance of compressor MainConcept ProDV Codec 3.0.16 from use
2012-04-18 17:23:06.967327 [(16)]: analog: compressor is no longer in use
2012-04-18 17:23:06.967327 [(16)]: analog: removing instance of compressor LAME Audio Encoder from use
2012-04-18 17:23:06.967327 [(16)]: analog: compressor is no longer in use
2012-04-18 17:23:06.967327 [(16)]: analog: dispose completed
2012-04-18 17:23:07.076527 [SetupTv(1)]: TCP connect took : 69
2012-04-18 17:23:07.076527 [(20)]: Controller: epg start

I have no mediaportal.log but a tv.log which i post above.

Never though it is such complicate.
 

Vasilich

Portal Pro
August 30, 2009
3,394
1,170
Germany, Mayence
Home Country
Russian Federation Russian Federation
as you don't read my posts carefully and don't really answer my questions, i will answer in your style:
2012-04-18 17:23:06.889327 [(16)]: analog:unable to connect audio compressor->muxer returns:0x80040217
so your lame encoder is incompatible with used muxer "Analog MPEG Muxer".

insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (12,1,'InterVideo Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (13,2,'Ulead MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (14,3,'MainConcept MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (15,4,'MainConcept Demo MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (16,5,'CyberLink Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (17,6,'CyberLink Audio Encoder(Twinhan)',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (18,7,'Pinnacle MPEG Layer-2 Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (19,8,'MainConcept (Hauppauge) MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (20,9,'NVIDIA Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (21,10,'MainConcept (HCW) Layer II Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (22,11,'CyberLink MPEG Audio Encoder',1);
insert into "SoftwareEncoder"("idEncoder","priority","name","type") values (23,12,'ATI MPEG Audio Encoder',1);
i don't see lame audio encoder here as supported audio encoder, so try to install one of supported ones.
 

Users who are viewing this thread

Similar threads

That fixed the problem. I just manually installed VC_redist.x64.exe and reinstalled 1.32 64-bit. Thanks for that. A couple of things; the deployment tool for 1.32 doesn't remove the previous version when you're updating from 1.31 to 1.32 and "MediaPortal TV Server" gets installed even when you choose to install the client only. I...
That fixed the problem. I just manually installed VC_redist.x64.exe and reinstalled 1.32 64-bit. Thanks for that. A couple of...
I have performed client installations of 1.32 64-Bit on four machines using the central configuration setup on Windows 10 Pro...
Replies
2
Views
627
Hi, you can try the new installer from this post if you like.
Hi, you can try the new installer from this post if you like.
Hello, I came from MediaPortal 1.30 and wanted to Update on 1.32 x64 Edition. I cleanly uninstalled 1.30 first and then installed...
Replies
7
Views
830
@CyberSimian Thank you very much. That has worked!!
@CyberSimian Thank you very much. That has worked!!
Do live TV subtitles work for TV in Australia? If so what are the settings? I am a 74 year old with hearing impairment and have...
Replies
12
Views
2K
You could try using the UNC paths for the timeshift and record folders. On the client machine go to MediaPortal configuration - TV/Radio - Advanced Options tick the UNC paths tick box and put the network paths for timeshift and record folders in the appropriate lines and click OK.
You could try using the UNC paths for the timeshift and record folders. On the client machine go to MediaPortal configuration -...
I am not new to MediaPortal, but this is the first time I have set up a client on a PC other than the PC with the TV Server. I...
Replies
7
Views
2K
OK, so I took a deep dive in the logs myself (gotta start to learn sometime) and noticed an error about Gentle.config Opened the file and it was full of NULLs. Not good for an XML file. I found an old thread (gentle.config) which had some 11-years-old XML. On the off-chance that this could fix my problem, I cut-and-pasted it into...
OK, so I took a deep dive in the logs myself (gotta start to learn sometime) and noticed an error about Gentle.config Opened the...
It never rains but it pours. All of a sudden MP1 refuses to connect to the TV service (which is on the same PC) and comes up with...
Replies
1
Views
2K
Top Bottom