Post problems you have when using MediaPortal,
or pre installation questions in here.
Hey guys,
Thanks for your speedy reply, its stinks that its not a current feature. I am not sure how to link another post but the subject of the other post was "Mouse Support for Slider Patch." I am not sure how to install it or if it will even work with the current version of MP but I am eager to try it. If someone knows how to...
Hey guys,
Thanks for your speedy reply, its stinks that its not a current feature. I am not sure how to link another post but...
Hi everybody,
I am new to MP but not to HTPC. I have been using a HTPC for years with a gyro mouse (instead of a remote...
Well, keep in mind, almost every SS2 users had some weird crashes or else after which nothing seemed to work.
If you will experience this once just reboot and try dvbviewer once - it almost magically did some stuff to "reinitalize" the card (or lnb?) and MP worked again :wink:
Well, keep in mind, almost every SS2 users had some weird crashes or else after which nothing seemed to work.
If you will...
Any suggestion as to what steps I could take to try & figure out what's wrong would be greatly appreciated. Any other information...
I also have the PVR-350 but I have (almost) never used it's TV-out port.
The only use I could think of, is (1) If you have a very low-end PC that cannot really decode TV with software (but then you are maybe very low-end to run MP at all), (2) If you want to have all "controls" on your vga TV-out and only TV through 350 TV-out (MP...
I also have the PVR-350 but I have (almost) never used it's TV-out port.
The only use I could think of, is (1) If you have a...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: Project X
Windows Version: Windows...
Ronilse,
Those codecs didn't work for me either.
I tried RC2 with an SVN from January and that didn't work either.
The only thing that seems to stop the stuttering is if I hit the FFWD button.
Unfortunately that is a real pain in the backside.
Thanks
Ronilse,
Those codecs didn't work for me either.
I tried RC2 with an SVN from January and that didn't work either.
The only...
Area: Media Portal Program
MP Version: .2 RC4
Skin: MCE
Windows Version: XP SP2
CPU Type: AMD 3.2
Memory: 1G
Motherboard...
Yes, you can write a script.
You can use the external command plugin to run the script (just a .bat file) when you change channel.
This can look at the channel passed as an argument and send the appropriate commands via your infrared transmitter.
I use a Redrat3 to control my sky box.
Have a look at this...
Yes, you can write a script.
You can use the external command plugin to run the script (just a .bat file) when you change...
Hi,
I posted this in the EPG section and got no responses.
I know cross posting isnt good but I really need some guidance...
http://wiki.team-mediaportal.com/Supported_TVCard_Analog_Software_Encoding
It's a software card, but it should be supported. Please make sure you have the latest drivers.
http://wiki.team-mediaportal.com/Supported_TVCard_Analog_Software_Encoding
It's a software card, but it should be supported...
I'm new to this forum, just installed MediaPortal. My tv card is a
Conexant Capture (Prolink PixelView Play TV MPEG2).
I'm...
I've got it working now, I just removed the card and readded it in mediaportal, now I just have to figure out why the DirecTV channel changing plugin has stopped working.
I've got it working now, I just removed the card and readded it in mediaportal, now I just have to figure out why the DirecTV...
Area: Media Portal - MyTV
MP Version: 0.2.0.0 RC4
Skin: MCE
Windows Version: XP SP2
CPU Type: Athlon 2200+
Memory: 512mb...
Hi,
Thanks for replying & great if it works better.
Feel free to add your suggestions to the request thread, if it's not there :)
Regards
Roy
Hi,
Thanks for replying & great if it works better.
Feel free to add your suggestions to the request thread, if it's not there...
Area: LAME mp3 ripper
MP Version: 0.2RC4
MP SVN-Snapshot: Last SVN of the 17th of may
Skin: PM III
Windows Version: Windows XP...
Hi,
This is already in Mantis http://mantis.team-mediaportal.com/view.php?id=678 if this is what you mean....
Regards
Roy
Hi,
This is already in Mantis http://mantis.team-mediaportal.com/view.php?id=678 if this is what you mean....
Regards
Roy
Is there anyway that one only preview "browsed skins in "the small picture" and not the whole MP (as this is very buggy/unstable...
The bug is logged already, still needs to be fixed: http://mantis.team-mediaportal.com/view.php?id=761
The bug is logged already, still needs to be fixed: http://mantis.team-mediaportal.com/view.php?id=761
I know that ALT and return should shrink MP but most times it doesnt.
it will reduce the size and then expand within 2 seconds...
That was just fixed yesterday. :wink:
Try very latest SVN build.
Note: The webbrowser plugin might behave differently, tho. It has some major bugs atm.
That was just fixed yesterday. :wink:
Try very latest SVN build.
Note: The webbrowser plugin might behave differently, tho...
Hi!
I have MP 0.2.0RC4 (I finally made the move from M$ MCE2005 and god, should I have done that months ago...)
I have an MCE...
Multiple accounts shouldn't matter. As long as you have set windows so that it does not show the login screen on resume from standby (Power Options), when Windows resumes, it will just return to the same user account. MP doesn't have the ability to automatically log in to a certain account, but this should work around it.
For your...
Multiple accounts shouldn't matter. As long as you have set windows so that it does not show the login screen on resume from...
Hi,
Sorry if this is a bit of a lame question, but where can I download Powerscheduler and some information about it?
I...
in this case i can only point you to this post since i do not use a software card, and i do not know how to get it working.
the only thing i know is that you need one of the software encoders listed in this post, to get it working.
in this case i can only point you to this post since i do not use a software card, and i do not know how to get it working.
the...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MetalMedia
Windows Version: Windows...
I just tested it and it works great! I hope "0000697: Certain cards are loosing TV signal after varying periods of time" issue gets fixed soon...so I can use the MCE mapping. As I think I'm going back RC2 because the TV working is more important to me right now. THANX!
I just tested it and it works great! I hope "0000697: Certain cards are loosing TV signal after varying periods of time" issue gets...
Is there a way to map any button on the Microsoft remote to open the cd drive? (the button on my case dosen't lign up too well and...
seems like if i use the regular divx compressions, it works.
problem is, the video list will only see the divx file if is viewed by filename. if its viewed by title, it wont show it. i guess since it lost the dvr-mm wrapper in the compression
seems like if i use the regular divx compressions, it works.
problem is, the video list will only see the divx file if is viewed...
So Dr. Divx supports the dvr-ms file type. I used it to compress a movie. It now has an extension of .divx. I went into...
Callifo, can you take a look at this thread https://forum.team-mediaportal.com/viewtopic.php?t=15296&postdays=0&postorder=asc&start=0
and give me a hand? i think that this couldn't be so difficult with all the information that i've supplied.. at least, to know the real source of the problem, what line of code is producing the...
Callifo, can you take a look at this thread...
I have been getting an error message saying that the program is unable to create a graph and cannot do the timeshift. As a result...
Thanks, mPod - I knew I shouldn't hijack the thread but I had been trying to get help here:
https://forum.team-mediaportal.com/viewtopic.php?t=14847&highlight=
to no avail, and saw an "opening" :wink:
Thanks for the definitive answer: it sounds like there is no current way to map a tab key to an MCE remote control key...
Thanks, mPod - I knew I shouldn't hijack the thread but I had been trying to get help here...
mPod - can I use that editor to map any arbitrary keyboard keypress to a remote button - I would like to map the "TAB" key to be...
The problem is that there is Greek Teletext and all TV sold in Greece have their Teletext EPROM with Greek (and latin) characters. Somehow latin pages show correctly and Greek show correctly (so "codepage" must be broadcast somehow).
Is it possible to have this functionality in MP?
I suspect it would be useful to other...
The problem is that there is Greek Teletext and all TV sold in Greece have their Teletext EPROM with Greek (and latin) characters...
The problem is that there is Greek Teletext and all TV sold in Greece have their Teletext EPROM with Greek (and latin) characters...
As DMAN already stated in this thread, nobody of the team devs has such a card. So unless someone else submits a patch for it, chances are bad that it gets fixed, as all attempts to fix it without having such a card failed, as you can also see in that thread.
So either someone else submits a fix or someone sends a card to DMAN (based...
As DMAN already stated in this thread, nobody of the team devs has such a card. So unless someone else submits a patch for it...
Alot of ppl have problems with the nvtv based cards! Why does it seem that nobody is trying to fix this anymore? I mean it has to...
there is a thread around with similar probs...
i had exact prob while ago and it was my keyboard. try to look into windows device manager (keyboards, mouse, HID devices) and find compontents that have enabled "Allow device to bring computer out of standby". try to disable that and see if it helps...
rgs,
pirlone
p.s.: found...
there is a thread around with similar probs...
i had exact prob while ago and it was my keyboard. try to look into windows device...
suddenly the powersheduler won't work properly. after 3 minutes he goes to hibernation but he wakes up immediatly. so, if i'd leave...
Thanks. Here is a thread that also gives an answer:
https://forum.team-mediaportal.com/viewtopic.php?t=15505&postdays=0&postorder=asc&start=0
And here is a direct link to the file (by Smirnuff):
https://www.team-mediaportal.com/component/option,com_remository/Itemid,0/func,fileinfo/id,77/
I'll try it tonight.
Now, three...
Thanks. Here is a thread that also gives an answer...
Just got a Dual Mac Mini (booting to XP MCE 2005 through Boot Camp) and dumped my big MCE box. The thing works really great:-) I...
Hi,
I was wondering if there's an option to set MP to auto play the next video file on the folder/file list.
I have a lot of videos saved in folders like: Simpsons, Friends, etc...
When I select a file to play, it plays fullscreen; then once it finishes, it returns to the file/folder list. Can this be made so that it will...
Hi,
I was wondering if there's an option to set MP to auto play the next video file on the folder/file list.
I have a lot of...
Hi,
I was wondering if there's an option to set MP to auto play the next video file on the folder/file list.
I have a lot of...
If you have the Microsoft remote, you can configure your powerdown button in energy settings of xp. It's the setting for "standby button" in the second tab.
If you have the Microsoft remote, you can configure your powerdown button in energy settings of xp. It's the setting for "standby...
hi,
are there shortcuts for hibernation and / or for standby in MP?
thank you
wunschkind
oups, missed that
either that, or I have a nice Commodore 64 you could try running MP on
oups, missed that
either that, or I have a nice Commodore 64 you could try running MP on
Gonna make the switch!
I have a box with these specs:
Athlon XP 1700+
1GB RAM
ATI Radeon 7000 64mb
Hauppauge 150 MCE
M-Audio...
if the container is empty you are right. if not, you can delete it. updating the EPG info will also will the container with shows.
timer -> open that folder of the scheduled recording -> select any of the schedules -> right click (context menu) -> and "Delete this entire recording"
if the container is empty you are right. if not, you can delete it. updating the EPG info will also will the container with shows...
I scheduled a show to record same time/channel/weekday and can't figure out how to cancel it. I can cancel the individual show...
correct. if you created such a file, please tell us so we can include it into SVN
correct. if you created such a file, please tell us so we can include it into SVN
Hi,
How can i add a new satellite (names INsat 2E) to the list on the dropdown menu?
Cheers
this bug should have been solved weeks ago.
can you check if the dvb-s data was exported into the xml file please?
for a backup you can also copy the Radio and TV database.
this bug should have been solved weeks ago.
can you check if the dvb-s data was exported into the xml file please?
for a...
5 minutes ago i wanted to edit a channelname in configuration. accidently i pushed the delete button instead of the edit button...
,,solved the problem right now.
you need to install an mpeg encoder (i.e. intervideo windvr 3) for analog tv-cards in mp...
maybe this helps somebody''
Sorry but this work not, i have same unable to create error with Pinnacle 110i in RC4 and ,,install an mpeg encoder'' not help
,,solved the problem right now.
you need to install an mpeg encoder (i.e. intervideo windvr 3) for analog tv-cards in mp...
yesterday i have tried in my htpc rc2 with last cvs that add again support for this card, it was recognized but an "unable to...
I have just made a clean reinstall of MP RC4 and same result.
When I press the radio channel nothing happens. And then MP stops responding and crashes.
MP RC3 worked(Scanned channels manually)
I have just made a clean reinstall of MP RC4 and same result.
When I press the radio channel nothing happens. And then MP stops...
Area: Media Portal Program
MP Version: 0.2.0.0 RC4
Skin: BlueTwo
Windows Version: Windows XP SP2
CPU Type: Intel 2.8
Memory...
Thank you,
I 've just done it this night ! It's run. Beautiful!
:D
Thank you,
I 've just done it this night ! It's run. Beautiful!
:D
Hello people,
I am brand new about this forum even if I follow you from more then a while.
I like media portal but I cannot run...