General Support (175 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
When i try to run the MediaPortal Support Wizard it doesn't work. On step 2 I receive an error with a window popping up starting with "The application attempted to perform an operation not allowed by the security policy. The operation required the SecurityException....."
When i try to run the MediaPortal Support Wizard it doesn't work. On step 2 I receive an error with a window popping up starting...
Current SVN claims that the software works on Avermedia Hybrid Cardbus (E506R). However, when trying to tune channels for the...
Replies
2
Views
2K
If we skip the "wich one to use" and concentrate on Wich one takes precidence? tv option or the other? PS:Thanks for the link.Will read it tonite:DS //Lasse
If we skip the "wich one to use" and concentrate on Wich one takes precidence? tv option or the other? PS:Thanks for the...
Hi There is a deinterlace setting under the tv and one under the Decoder Filters, Windvd7 deco.. Wich one takes precidence. Do...
Replies
3
Views
1K
yeah i noticed that if you go into the remote settings you can increase the delay i have mine set at 500ms but im going to try higher.
yeah i noticed that if you go into the remote settings you can increase the delay i have mine set at 500ms but im going to...
Drowhunters Media Portal XBMC sytle Direct Input Config v0.2 ============================================================ May 28...
Replies
2
Views
3K
Card Support Got the new compro dvb-t drivers digital 1.3.3.9 working OK, even got the analog side to at least enable configurator to tune analog stations ok, getting them to work under MP live is another matter. Re the digital drivers, may I be forgiven for the dastardly act of reading the documentation, it is the worst sin for...
Card Support Got the new compro dvb-t drivers digital 1.3.3.9 working OK, even got the analog side to at least enable configurator...
The latest version (1.3.3.9 of Compro DVB-T (Videomate) hybrid drivers are not recognised by mediaportal. The previous version...
Replies
2
Views
2K
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC4$CVS-23.05.2006- 1:01:15,16 (2006-05-23) MediaPortal Skin: mce Windows Version: Windows XP (Szervizcsomag 2) .NET CLR Version: 2.0.50727 DirectX Version: 4.09.00.0904 (9.0c) Audio Codec: NVIDIA Audio Decoder Video Codec: NVIDIA Video Decoder CPU Type: Intel Pentium...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC4$CVS-23.05.2006- 1:01:15,16 (2006-05-23) MediaPortal Skin: mce...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC4$CVS-23.05.2006- 1:01:15,16 (2006-05-23) MediaPortal Skin: mce...
Replies
0
Views
1K
Hi, please use our Support Template / Tool. Also post your logs into PasteBin. Do you have installed Elecard? Flip.
Hi, please use our Support Template / Tool. Also post your logs into PasteBin. Do you have installed Elecard? Flip.
I've a winfast tv2000 xp deluxe card. The scan worked. But I've a black sceen when i see the tv. Why ? My video codec is leadteck...
Replies
2
Views
1K
ok...I'll go that route. But I'll get that info anyway since I'm sure I'm not the only person in the world that may want to use external inputs on a Fusion card...(well....at least I'd hope I'm not anyway :P )
ok...I'll go that route. But I'll get that info anyway since I'm sure I'm not the only person in the world that may want to use...
Hi, I was curious as to if anyone else has attempted to use the external inputs on a Fusion 5 card. The setup I have now is with...
Replies
7
Views
3K
send me one to hey could you send me a copy of that capturedefenitions.xml Cuz my asus p7131 dual does'nt work either my mail are kreller@krellers.dk
send me one to hey could you send me a copy of that capturedefenitions.xml Cuz my asus p7131 dual does'nt work either my mail...
Area: Media Portal Program MediaPortal Version: 0.1.3.0 (2005-07-16) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
15
Views
13K
Area: DVB-S Tuning MediaPortal Version: 0.2.0.0 (2006-03-18) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2) .NET CLR Version: 2.0.50727 DirectX Version: 4.09.00.0904 (9.0c) Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder Video Codec: Mpeg2Dec Filter CPU Type: AMD Athlon XP 3000+ Memory: 511 MB Motherboard: MS-6570E...
Area: DVB-S Tuning MediaPortal Version: 0.2.0.0 (2006-03-18) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2) .NET...
Area: DVB-S Tuning MediaPortal Version: 0.2.0.0 (2006-03-18) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2) .NET...
Replies
0
Views
1K
Hello my fellow Media Portal users! Since about one week ago i started using Media Portal 0.2 RC4 for my HTPC. It al works quite well although i have one mayor problem. When watching TV by media portal the sound is one or two seconds to early to match what is happening on the screen. This is becoming quite irritating, and i tried...
Hello my fellow Media Portal users! Since about one week ago i started using Media Portal 0.2 RC4 for my HTPC. It al works quite...
Hello my fellow Media Portal users! Since about one week ago i started using Media Portal 0.2 RC4 for my HTPC. It al works quite...
Replies
0
Views
1K
Just take a look at FAQ in the Wiki: http://wiki.team-mediaportal.com/FrequentlyAskedQuestions Regards Ralph
Just take a look at FAQ in the Wiki: http://wiki.team-mediaportal.com/FrequentlyAskedQuestions Regards Ralph
Hi, A really silly, stupid question but I have to ask since I´m probably blind and not just stupid.. Where can I change dir...
Replies
5
Views
3K
Everybody who is looking for this, too, take a look at FAQ in the Wiki: http://wiki.team-mediaportal.com/FrequentlyAskedQuestions Regards Ralph
Everybody who is looking for this, too, take a look at FAQ in the Wiki...
Hi, I just started using MP and think its great, nice work! I would just like to know, when i hit record in MyTV, where it...
Replies
2
Views
1K
Got this resolved with this MS Patch Hi, I stepped over this post and the Patch listed below solved my problem https://forum.team-mediaportal.com/viewtopic.php?t=8146 Even though I have just one DVB and one analog card in my PC this patch seems to be necessary. It updates the psisdecd.dll which caused the crash. 3th : DVB...
Got this resolved with this MS Patch Hi, I stepped over this post and the Patch listed below solved my problem...
Hello, I am trying to get my Technotrend C-1500 DVB-C card to work. When I start "configuration.exe", switch to "Capture Cards"...
Replies
1
Views
1K
A lot less taxing than recording two different channels at the same time and MP can do that quite easily. Plus the added benefit of doing exctly what you want it to ;-)
A lot less taxing than recording two different channels at the same time and MP can do that quite easily. Plus the added benefit...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC4 (2006-04-18) MediaPortal Skin: BlueTwo Windows Version: Windows XP...
Replies
8
Views
2K
Hi, I am desperately wanting a dual DVB system, and am having possible problems with signal strength, so I really want to only have one aerial on my HTPC. Hence the need for only a single card. I don't like the idea of the Dvico Fusion, which is effectively one PCI and one USB tuner on a card, and it is pretty expensive in the...
Hi, I am desperately wanting a dual DVB system, and am having possible problems with signal strength, so I really want to only...
Hi, I am desperately wanting a dual DVB system, and am having possible problems with signal strength, so I really want to only...
Replies
0
Views
1K
MP1 MP2 RAID Setup Benefits (1 Viewer) DE
shred444: still have the problem? I would search more in and around MP. An actual disk shouldn't have any problem to work flawlessly under MP when working normal. Two things I had recently that caused stuttering: - problem when reading EPG. MP doesn't realize the the current EPG is up to date and reads it in again and again...
shred444: still have the problem? I would search more in and around MP. An actual disk shouldn't have any problem to work...
Hey guys, so im getting some stuttering issues on my new HTPC. It happens when timeshifting is turned on or when im recording...so...
Replies
16
Views
3K
Hi I'm in the same boat as you (Got a Silverstone case with iMon VFD)and I'm planning to buy an internal IR receiver that is compatible with the MCE Keyboard.
Hi I'm in the same boat as you (Got a Silverstone case with iMon VFD)and I'm planning to buy an internal IR receiver that is...
Hi, Everything I've read about the MS MCE keyboard is that you need to purchase the MCE remote to get the IR receiver for it...
Replies
3
Views
3K
Yeah, that's where I found it. Thank you for your details anyway. BUT... my plasma said 'not supported' :-( LUCKILY, when I tried 960x600 it's okay. Although it's not 16:9 it comes very close. Of course, it doesn't make much sense to use 960 on my 800 resolution. But at least now, everything appears in (almost) correct aspect...
Yeah, that's where I found it. Thank you for your details anyway. BUT... my plasma said 'not supported' :-( LUCKILY, when I...
I've posted following message under General Support sometime ago: I'm running XP 800x600 mode on a 16:9 plasma TV via VGA-input. I...
Replies
5
Views
1K
Hello, Whenever I turn down the volume or change a channel in MyTV the screen darkens. It's really annoying, I didn't have this on my old install. I installed 0.2 before so I think that might have caused the problem. Does anyone know how I can disable that? Thanks!
Hello, Whenever I turn down the volume or change a channel in MyTV the screen darkens. It's really annoying, I didn't have this...
Hello, Whenever I turn down the volume or change a channel in MyTV the screen darkens. It's really annoying, I didn't have this...
Replies
0
Views
864
GOOD DEAL, THANKS ALLOT I WILL GIVE THIS A TRY TONIGHT IF IT WORK LIKE YOU SAY I WILL REMOVE THE MS MEDIA CENTER AND START USING THIS AWSOME SOFTWARE PACKAGE KEEP UP THE GOOD WORK GUYS
GOOD DEAL, THANKS ALLOT I WILL GIVE THIS A TRY TONIGHT IF IT WORK LIKE YOU SAY I WILL REMOVE THE MS MEDIA CENTER AND START USING...
Hello, I use the xbmc for a long time, one of the futures i like alot is that xbmc lets you watch movies direct from a iso or...
Replies
4
Views
2K
Hi and welcome aboard :) About the not enough disk space problem. Open the "Setup MediaPortal" shortcut on your desktop the go to Television -> Capture Cards, then select your capture card from the list and click edit. There is a field to specify the recordings folder. Just use something like "c:\capture" and try it out. The...
Hi and welcome aboard :) About the not enough disk space problem. Open the "Setup MediaPortal" shortcut on your desktop the go...
Hi guys, i am hoping that maybe some will help me on this one. i have a SFF pc in my bedroom running xp pro with mediaportal on it...
Replies
1
Views
1K
MP1 MP2 playlist with 2000+ mp3 not possiple (1 Viewer) DE
ohh well i have that winamp plugin enabled and yes i figured out what the problem was i have id3 enabled so it seems like MP goes on the internet to grap info about the 2000 + mp3s i have and WOW that takes awhile i must say *LOL* soo i disabled the ID3 and it now takes a couple of minuts too load the playlist witch is still a...
ohh well i have that winamp plugin enabled and yes i figured out what the problem was i have id3 enabled so it seems like MP...
hi when making a playlist in winamp with more than 2000 mp3s MP takes 30 minutes too even playing the fist number and then after...
Replies
2
Views
873
Hi folks, I've seen many of the HTPC progs out there but MP is by far the best!!! Thank you ... Today I was able to run my Technotrend DVB-S card with MP. Following is a patch for CaptureCardDefinitions.xml :D http://frankdataservice.dyndns.org/tt-s-1401.txt With this setting I was able to watch live TV. But...
Hi folks, I've seen many of the HTPC progs out there but MP is by far the best!!! Thank you ... Today I was able to run my...
Hi folks, I've seen many of the HTPC progs out there but MP is by far the best!!! Thank you ... Today I was able to run my...
Replies
0
Views
2K
MP1 MP2 thums for tv series DE
Gotta do it the hard way google images for the series then save in the same directory with the same name as the file and/or as folder.jpg
Gotta do it the hard way google images for the series then save in the same directory with the same name as the file and/or as...
i know how to download coverart for films using the database provided but how do i do it for tv series i have ripped to divx,like...
Replies
1
Views
868
sorry to read about that, but i honestly understand the actual postition to make the mp 0.2 release happen by concentrating on bugfixing. in my simple mind i only thought that it cannot be that tv recording is nearly perfect and only audio is not possible yet ;-) a big thank you to all you dev´s and testers.. looking forward...
sorry to read about that, but i honestly understand the actual postition to make the mp 0.2 release happen by concentrating on...
Hi there, since i´ve been searching and didn´t find a topic that answers my questions, please be patient with me, but: am i...
Replies
2
Views
1K
Try S-button from keyboard.
Try S-button from keyboard.
Does anybody know how to change from the default 4:3 to 16:9 with a FireDTV? I tried the 16:9 button on the FireDTV Remote Control...
Replies
1
Views
1K
MP1 MP2 Tv tuner help DE
With so little info you really expect feedback? Find the support request template and on the side do a search looking for what OTHERS did with similar problems.
With so little info you really expect feedback? Find the support request template and on the side do a search looking for what...
i just download this program as an alternative to MCE and it looks great but i cant use the tv. it wont take my tv tuner that is a...
Replies
1
Views
899
Hi, just because to check / have the latest drivers. I had also no issues with the previous ones. Flip.
Hi, just because to check / have the latest drivers. I had also no issues with the previous ones. Flip.
I was reading over at shspvr and noticed that Hauppauge has some beta drivers out. Here is the change log over what most of us...
Replies
3
Views
2K
I have no problems starting MP up with TimeShift on shortly after I turned my PC on - But if I wait.. lets say two ours, I can´t start MP op with TimeShift on. - Then my TV only show me a frame once a while and gets all pixelated - same story about the sound. Seems like a buffer og some memmory is full. But the TV-tuner have not...
I have no problems starting MP up with TimeShift on shortly after I turned my PC on - But if I wait.. lets say two ours, I can´t...
I have no problems starting MP up with TimeShift on shortly after I turned my PC on - But if I wait.. lets say two ours, I can´t...
Replies
0
Views
868
Isn´t it windows media player engine that´s playing the movies? Because if i play the files with that player i can easily change the language from the menu. PlasmaGucker
Isn´t it windows media player engine that´s playing the movies? Because if i play the files with that player i can easily change...
HI out there.. Is it not implemente or a bug that i can´t change the language in My Videos? E.g i wanted to watch a .ratDVD...
Replies
4
Views
1K
Top Bottom