General talk regarding our HTPC-software MediaPortal 1 takes place here.
Hiya!
Log's uploaded, sorry i decided to go to the pub instead for lunch.. :)
Cheers!
Hiya!
Log's uploaded, sorry i decided to go to the pub instead for lunch.. :)
Cheers!
Help!
When ever I start media-portal it just sais "Media portal has encountered a problem and must close" and "you may have lost...
I use 2 different solutions at the moment.
The MP server sits in the basement with one screen going to the kitchen on vga and one screen going to the sitting room on s-video (MP runs great over tv out).
For the kitchen I use an ATI wonder remote. It's rf with the usb receiver in the basement and works very well upto 10m away...
I use 2 different solutions at the moment.
The MP server sits in the basement with one screen going to the kitchen on vga and...
What remote control do you like to use with your MediaPortal? I have XP SP2 and I'm thinking of getting one.
I don't have a tv...
Hi guys, i have been using MP for sometime now and without many issues, recently i reloaded RC3, and now no matter what i seem to try i cannot get a steady stream from my DVB-T card.
Whats happening is I'm getting slowmotion video, and sound that is ahead of the video by 10 seconds or so.
And then the sound stutters, stops and the...
Hi guys, i have been using MP for sometime now and without many issues, recently i reloaded RC3, and now no matter what i seem to...
Hi guys, i have been using MP for sometime now and without many issues, recently i reloaded RC3, and now no matter what i seem to...
Hi .
I have been running TV3 server now for a month .
And i think that it is great .
So yesterday i bought a new computer ( only for TV3 server ).
I installed XP ( MCE XP ) . and installed all MS upgrades .. ( Took a while )..
Then i installed my Fire DTV ( i have 2 ) and my WinNova PCI card with latest driver ..
I...
Hi .
I have been running TV3 server now for a month .
And i think that it is great .
So yesterday i bought a new computer...
Hi .
I have been running TV3 server now for a month .
And i think that it is great .
So yesterday i bought a new computer...
Hi Infinity loop,
Please check out my guide at this thread, and leave a comment or two on how to improve it.
https://forum.team-mediaportal.com/codec_guide-t30191.html?p=196920&posted=1
Hi Infinity loop,
Please check out my guide at this thread, and leave a comment or two on how to improve it...
Hello Community :)
One problem we encounter quite often is that some users have problems to get the correct codecs for specific...
I'd like to connect my Nintendo Wii to my media center (Hauppauge PVR-150) so I can access it trough the video input channel. But (obviously) anything coming through the PVR-150 is converted to mpg and then shown, which causes a delay (you won't notice when watching TV but you will notice when playing a console game). Is it possible...
I'd like to connect my Nintendo Wii to my media center (Hauppauge PVR-150) so I can access it trough the video input channel. But...
I'd like to connect my Nintendo Wii to my media center (Hauppauge PVR-150) so I can access it trough the video input channel. But...
I have upgraded to RC3 by uninstalling RC2, deleting everything remaining, then set up RC3 from scratch and then recovering the TV and video databases (well, and TV logos); that borught back all my recordings, schedules, etc. I don't think they have changed in any way. Don't keep the xml config files, though, that's a sure way to get...
I have upgraded to RC3 by uninstalling RC2, deleting everything remaining, then set up RC3 from scratch and then recovering the TV...
Hi
I've been out of the loop for a while, been happilly running 0.2.2.0+svn with pretty good stability (and WAF).
I'm having...
Yes, that's correct. Enable the Power Scheduler plugin and set it to hibernate. Don't manually power down your computer, instead go to the Home screen, stop TV (if time-shift was enabled TV will still be running) and let it there; it will shut down automatically and awake for the next recording.
Yes, that's correct. Enable the Power Scheduler plugin and set it to hibernate. Don't manually power down your computer, instead go...
Hi All,
Just wonder if I can easily make the PC to shutdown itself after a scheduled TV recording in MP is finished. I don't...
Hello moggesmann,
different users will recommend you different versions because they work for them flawlessly. However due to the vast amount of different system setups the versions which will work differ from system to system.
I would recommend you to install the latest version since it contains all of the latest features and should...
Hello moggesmann,
different users will recommend you different versions because they work for them flawlessly. However due to the...
Hallo, I´m a new user of Mediaportal.
In the next few days i would install mediaportal an did not know many about it. Is it better...
You're not alone. I too have a Toshiba LCD via HDMI and suffer the same issue.
I'm used to it now so it doesn't bother me too much. Would still be interested to know if there's a trick though.
You're not alone. I too have a Toshiba LCD via HDMI and suffer the same issue.
I'm used to it now so it doesn't bother me too...
Hello,
I only get an picture on my LCD-TV (Toshiba 32WL66) if it is turned on when windows XP starts. If I try to turn on my LCD...
Hi again
Attaching the log files and the actual mpg file recorded. The recording starts 24-10-2007 19:39:27and stops 20:05.
Hi again
Attaching the log files and the actual mpg file recorded. The recording starts 24-10-2007 19:39:27and stops 20:05.
ive problems to record TV Film in Mpeg Format. If if play this Movies
the Screen is black ;(
TS Format works, but i want...
i moved this thread to the general forums because it isnt ever near to be a useful bugreport.
if you want to help the developers then please start proper reports based on the ::how to write a bugreport::
:thx:
note: further "bugreports" like this will be deleted.
i moved this thread to the general forums because it isnt ever near to be a useful bugreport.
if you want to help the developers...
Sorry to say the new R3 versions have many big problems.:o
I will list them here and hope you understand that this is big...
How about someone just make a "My HD DVDs" plugin, where it is like "My Movies" but every movie in "My HD DVDs" points to a folder that has your HDDVDs/BluRays and is opened w/an external player like Power DVD? Is there anyway to have 2 "My Movies" at once? Where you could use the 1 for regular DVDs using the internal player, and...
How about someone just make a "My HD DVDs" plugin, where it is like "My Movies" but every movie in "My HD DVDs" points to a folder...
I used to used powerdvd ultra and the my programd plugin to watch HD-dvd's with my xbox drive but now with the latest build of mp i...
Thanks for the advice. I think DVD playback is fine (I can't check now, I'm at work doing a 24 hour shift :( ). However it definately stutters in the same way when playing DivX movies from the laptop's hard drive. I did try updating the drivers but it didn't help. Creating the buffer didn't work either.
I am streaming over...
Thanks for the advice. I think DVD playback is fine (I can't check now, I'm at work doing a 24 hour shift :( ). However it...
My laptop (client) tends to stutter every few minutes when watching streaming movie files or TV. Both audio and video are...
Read below, under similar threads:
media portal being sold on ebay favian MediaPortal Talk 4 2006-07-01 16:57
selling media portal on ebay? {OF}Blong OffTopic 5 2006-01-31 02:12
Dodgy! Media Portal for sale again on ebay! Evanovitch MediaPortal Talk 11 2006-01-19 07:09
Media portal on sale at ebay?? dmf415 MediaPortal...
Read below, under similar threads:
media portal being sold on ebay favian MediaPortal Talk 4 2006-07-01 16:57
selling media...
I was a little disheartened to see this and this.
At least the second one has the decency to list that the software is open-source...
You can stream media to each machine and MP will do fine. If you use TV Server 3.0, you can also stream live TV to any machine on your network from a single machine.
You can stream media to each machine and MP will do fine. If you use TV Server 3.0, you can also stream live TV to any machine on...
If MP...can be watch on multiple Tv's...how can I go about doing it.....and can each tv record its own program...how can I change...
Hi
I have a Happauge 1300 card. I found MediaPortal because I was having problems getting mediacenter to work (had a loss of signal error).
Now I have a similar problem with MP. Mp scans and finds my channels but during the scan the preview is black and when I try to watch tv I'm not getting picture or sound.
I've tried Chris Tv...
Hi
I have a Happauge 1300 card. I found MediaPortal because I was having problems getting mediacenter to work (had a loss of...
Hi
I have a Happauge 1300 card. I found MediaPortal because I was having problems getting mediacenter to work (had a loss of...
Hi all,
I've been keeping an eye on MP for quite a while now. Nice to see all improvements. One thing is still strange, why is it taking so long (about 3-5 seconds) to re-paint the main form when changing the form size? Does anyone know what MP is doing on the paint event? This behaviour has been on all the latest versions. And by...
Hi all,
I've been keeping an eye on MP for quite a while now. Nice to see all improvements. One thing is still strange, why is it...
Hi all,
I've been keeping an eye on MP for quite a while now. Nice to see all improvements. One thing is still strange, why is it...
macedonian language file updated to 0.2.3. RC3
:thx:
macedonian language file updated to 0.2.3. RC3
:thx:
macedonian language file updated to 0.2.3. RC3
:thx:
thankyou, looks like what i was searching for.
:thx:
Ok nfslink didnt do it for me, as it is not possible to add more than one junction in the same directory.... then i might as well use multiple shares in mediaportal
thankyou, looks like what i was searching for.
:thx:
Ok nfslink didnt do it for me, as it is not possible to add more than one...
Hi,
Firstly, I think Mediaportal is fantastic - is has completely changed the way I use my PC!
I have 1 internal drive, and 1...
You only need one thread for these questions.
Not three :)
You only need one thread for these questions.
Not three :)
what hardware(s) do i need to get MP...on 4 tv's throughtout the house
Look through ::this thread::
Look through ::this thread::
I searched the forums and I thought there was a plugin or something that was realated to a Web interface for recording, similar to...
Suprisingly, it seems like Media Portal has a much, MUCH bigger community than Media Center (MCE2005 and Vista MCE). I really enjoy OpenSource projects and absolutely loved XBMC (except for the fact that it didn't support HD content).
Anyways, I'm setting up a simple HTPC server for video playback only. I really wish that I could...
Suprisingly, it seems like Media Portal has a much, MUCH bigger community than Media Center (MCE2005 and Vista MCE). I really...
Suprisingly, it seems like Media Portal has a much, MUCH bigger community than Media Center (MCE2005 and Vista MCE). I really...
Gah, was working but installed newer version and the SVM and dual display has disappeared!!
Gah, was working but installed newer version and the SVM and dual display has disappeared!!
Hi,
I have Display 1= LCD monitor and display 2= the plasma and config Dual View via Nvidia as follows
Display 1 is basically...
I'd be very surprised if it could. CDs maybe but I doubt it for DVDs.
I'd be very surprised if it could. CDs maybe but I doubt it for DVDs.
I am tossing up whether I should build a Mediaportal HTPC or buy a panasonic pvr/dvd burner. I know that a HTPC is more felxible...
Thanks Marcus.
I will give it a try when i come back home.
Will try to upload the latest TV3 enging.
:thx:
Regards Lars
Thanks Marcus.
I will give it a try when i come back home.
Will try to upload the latest TV3 enging.
:thx:
Regards Lars
Hi.
I got the TV server up running and have a few questions i hope you guys can help me with.
1. I have 2 Analog TV card and...
Hi
I'm having some problems using tv in MP.
I have a hauppauge hybrid card and these are my problems:
1. When using MP's wizard to scan for channels I get an error when it is just to start scanning. I searched the forums and found the solution to be to use the config and then choose to edit the analogue card - then searching...
Hi
I'm having some problems using tv in MP.
I have a hauppauge hybrid card and these are my problems:
1. When using MP's...
Hi
I'm having some problems using tv in MP.
I have a hauppauge hybrid card and these are my problems:
1. When using MP's...
I am new to media portal...I would like to know....is MP only to be watch on the computer or I can watch it on my regular tv.....Can I also watch it on multiple tv's...IE.the kids room or guest room:)
I am new to media portal...I would like to know....is MP only to be watch on the computer or I can watch it on my regular...
I am new to media portal...I would like to know....is MP only to be watch on the computer or I can watch it on my regular...
HI.
Found the problem, had this un-install and deleted all my reg. files with media portal on to be able to install the TV server, UPS there went the file the was mapping my IMON remote.
Regards Lars
HI.
Found the problem, had this un-install and deleted all my reg. files with media portal on to be able to install the TV...
Hi again.
I just got the TV server installed and have all the tv channel up running.
Now i have a problem with my remote...
Never thought that would be the answer. But... it makes sense.
Thanks for the quick response!
Joost
Never thought that would be the answer. But... it makes sense.
Thanks for the quick response!
Joost
in the tvminiguide at the end of the line the guide is showing percentages. What does this mean?