Hi, I think the problem come from your motherboard chipset/ grapic card... Do a search for 690g on the forum, but until now the only solution is to use the 7.2 catalyst driver
Hi, I think the problem come from your motherboard chipset/ grapic card... Do a search for 690g on the forum, but until now the...
Hard to say what's going on really. I had some trouble getting the client machine to take the tv stream at first, but it ended up...
Paranoid Delusion
I do not have that directory? I serached the entire hard drive for this file and it's no ware to be found? Do you know how it gets installed?
Paranoid Delusion
I do not have that directory? I serached the entire hard drive for this file and it's no ware to be found...
TV-Server Version:
MediaPortal Version: ?
MediaPortal Skin:
Windows Version: System says XP Media Center Edition Version 2002...
I've been using the HDHR since early September after Jafa (the HDHR dev) updated the driver so that it would work with MP. Note that these instructions relate to the original MP TV Engine, not the TVServer. This is a nice simple method...No SQL, no additional plugins to install. You do need to edit your capturecarddefinitions.xml...
I've been using the HDHR since early September after Jafa (the HDHR dev) updated the driver so that it would work with MP. Note...
I've been using the HDHR since early September after Jafa (the HDHR dev) updated the driver so that it would work with MP. Note...
I have the same problem (only I have 500MCE, which is the same card only with two tuners).
Never mind me, I'm a super newbie (I posted the above around 5 minutes after my MP install finished). It turned out I had the My TV plugin disabled (is this default?). Now it works like a charm. Good picture quality too.
I have a lot to learn...
I have the same problem (only I have 500MCE, which is the same card only with two tuners).
Never mind me, I'm a super newbie (I...
MediaPortal Version: 0.2.3.0
Windows Version: XP SP2
CPU Type: AMD Athlon
Memory: 1Gb
Motherboard: MSI
1. TV Card: Hauppauge...
Oh... My timed recording was on (from two canals) and I did some packing test and when it was on I did go some place and when I came back was computer booted and so on... There is file where is my recodings on harddisk but it is not on list and it is dvr-ms format so how I can add it to list to pack it to mpg then?
Oh... My timed recording was on (from two canals) and I did some packing test and when it was on I did go some place and when I...
Oh... My timed recording was on (from two canals) and I did some packing test and when it was on I did go some place and when I...
hi,
got my firedtv s2 and will fire my nova-s2.
Radio issues seems to be gone away. Only remaining one is that you have to stop radio in the radio screen before switching to TV. No crash but otherwise selecting a TV channel just restarts the last radio channel.
All seems to be more stable now.
Just starting of MP and...
hi,
got my firedtv s2 and will fire my nova-s2.
Radio issues seems to be gone away. Only remaining one is that you have to stop...
TV-Server Version: TV Server beta (Engine 0.3) latest SVN
MediaPortal Version: 0.2.3.0 RC2 latest SVN
MediaPortal Skin: Blue Wide...
Thx! I solved the problem by importing a channel list in which all channels I need are included. :)
(Sorry if there are too many mistakes - it's long ago since I learned English in school in Germany. ;)
Thx! I solved the problem by importing a channel list in which all channels I need are included. :)
(Sorry if there are too many...
Hi!
As a certain channel I'd like to watch was obviously not found, I wonder if it is possible to scan a single transponder to...
Since there are no takers, here's another clue.
If I choose to record now, I find the recording actually starts at least 15 minutes before I set the start. I'm sure this is all to do with timeshifting, which I'd gladly switch off, but I can't..
Since there are no takers, here's another clue.
If I choose to record now, I find the recording actually starts at least 15...
TV-Server Version:
MediaPortal Version = 0.2.3.0 RC2:
MediaPortal Skin = Blue Two Wide:
Windows Version = Windows MCE:
CPU...
> If your a vista user(which i would have known if you filled out all specs ) that file are in "C:\Users\All Users\Team MediaPortal\MediaPortal"
I found CaptureCardDefinitions.xml in "C:\Users\All Users\Team MediaPortal\MediaPortal", thank you ;)
By the way, Whereas "Autotune/scan" found 29 "new TV", no channel was added...
> If your a vista user(which i would have known if you filled out all specs ) that file are in "C:\Users\All Users\Team...
With MediaPortal 0.2.2, I was able to use my DVB-T card adding this lines in CaptureCardDefinitions.xml :
<capturecard...
Hi Mercedes
I use MediaPortal on a main HTPC with a pair of HVR-4000s for DVB-S (and hopefully DVB-T when I move shortly)and a PVR-500 for analogue TV.
I use a recent SVN of TVE3, MediaPortal 0.2.3 RC2 + recent SVN and have not had the problems that you describe.
Is your graphics chip DirectX 9 compatible and have you DirectX...
Hi Mercedes
I use MediaPortal on a main HTPC with a pair of HVR-4000s for DVB-S (and hopefully DVB-T when I move shortly)and a...
TV-Server Version:
MediaPortal Version: 0.2
MediaPortal Skin: blue skin
Windows Version: xp sp2
CPU Type: intel 3.2ghz
HDD...
No. thats impossible.
Microsoft has removed the SBE (StreamBufferEngine) in the Windows Server Versions.
And the TV-Engine of MediaPortal 0.2.x.x requires this.
No. thats impossible.
Microsoft has removed the SBE (StreamBufferEngine) in the Windows Server Versions.
And the TV-Engine of...
Quick question......does the MY TV application work on Windows server 2003 x64?
The reason I ask, is that I installed the Tv...
Hi Ray,
Well, I havent used Ultimate (apart from the beta) so not sure on the underlying security differences. The machine in question has only one account (apart from the hidden admin of course) and UAC is disabled from the user accounts. I am suprised that you dont get the nag message though.
However, even after install I cannot...
Hi Ray,
Well, I havent used Ultimate (apart from the beta) so not sure on the underlying security differences. The machine in...
TV-Server Version: 0.2
MediaPortal Version: 0.2.20
MediaPortal Skin:
Windows Version: VISTA
CPU Type: Cor2 Duo
HDD: 250G...
I this what you are looking for:-
http://wiki.team-mediaportal.com/Supported_TVCard_Analog_Software_Encoding
I assume that the All-In-Wonder 9200 is a software encoding TV card?
I this what you are looking for:-
http://wiki.team-mediaportal.com/Supported_TVCard_Analog_Software_Encoding
I assume that...
Media Portal does not recognize my All In Wonder as an TV input card. Is it not supported? I have looked around the forum but...
In Austria only the channels ORF1 and ORF2 are in the 16:9 format. I receive the tv channels over analog cable signal. All other channels have the old screen format (i think 4:3) so if you configure the tv card for these channels the 16:9 channels have the typical black stripes.
Can MP be configured that some special channels have...
In Austria only the channels ORF1 and ORF2 are in the 16:9 format. I receive the tv channels over analog cable signal. All other...
In Austria only the channels ORF1 and ORF2 are in the 16:9 format. I receive the tv channels over analog cable signal. All other...
So i did some debugging, and found, that this will be probably more complex
there is class DShowNET.Helper.Filter, in which is function
protected string getName(IMoniker moniker)
{
object bagObj = null;
IPropertyBag bag = null;
try
{
Guid bagId = typeof(IPropertyBag).GUID...
So i did some debugging, and found, that this will be probably more complex
there is class DShowNET.Helper.Filter, in which is...
Hello
i have MSI Digi Vox mini II USB stick, which is not supported in 0.2.2 so i added this to my CaptureCardDefinitions.xml...
i was able to find all free ones, by starting my blaze hdtv, opening a station not found with rc2, then loading MP and it found the new station most recently opened with blaze, after 2nd time doing this it found the rest of the free ones.
i was able to find all free ones, by starting my blaze hdtv, opening a station not found with rc2, then loading MP and it found the...
MediaPortal Version: latest stable version
MediaPortal Skin: standard wide
Windows Version: windows vista
CPU Type: intel...
Apologies. Despite me having a roof aerial connected to one tuner and the supplied small indoor aerial connected to the other, it wouldn't work. However, I went and bought a signal booster/splitter so that I could use one roof aerial for both tuner connections and now it picks up channels on both tuners! Strange it didn't pick up on...
Apologies. Despite me having a roof aerial connected to one tuner and the supplied small indoor aerial connected to the other, it...
Hi,
I cant seem to get my hauppauge nova-td usb stick setup in dual tuner mode. I have done it successfully in the "diversity"...
I use the lastest media portal 2.3 RC2 (the problem was the same with old version).
I can see tv with no problems, video also but with recorded tv, I have problem if I do a pause or a forward. With a forward the timer goes normaly but the image is blocked. I quit the MyTv and return into MyTV, if I restard the recorded film from...
I use the lastest media portal 2.3 RC2 (the problem was the same with old version).
I can see tv with no problems, video also...
I use the lastest media portal 2.3 RC2 (the problem was the same with old version).
I can see tv with no problems, video also...
How do you get the MyTV to work with this simple 2 LNB's switch? I found that only setting the Ku-Band to LOF1 11250 SW 12700 LOF2 11250 would switch to the 1st LNB. But, there is no separate Ku-Band setting for other LNB's (LNB #2, #3, #4). I feel that something is missing in MyTV egnine.
Can someone also tell me if/how I can...
How do you get the MyTV to work with this simple 2 LNB's switch? I found that only setting the Ku-Band to LOF1 11250 SW 12700 LOF2...
How do you get the MyTV to work with this simple 2 LNB's switch? I found that only setting the Ku-Band to LOF1 11250 SW 12700 LOF2...
MediaPortal Version: 0.2.3 RC2
Windows Version: XP Home SP2
CPU Type: AMD Turion 64 X2
1. TV Card: EC680 Analog TV Tuner
1. TV Card Driver: YUAN EC680 Analog Tuner Driver VERSION: 4.00 Rev. A6
I pluged in my cable tv cable to antena input of my card, started configuration -> television -> edit card and autotune.
It doesn't...
MediaPortal Version: 0.2.3 RC2
Windows Version: XP Home SP2
CPU Type: AMD Turion 64 X2
1. TV Card: EC680 Analog TV Tuner
1. TV...
MediaPortal Version: 0.2.3 RC2
Windows Version: XP Home SP2
CPU Type: AMD Turion 64 X2
1. TV Card: EC680 Analog TV Tuner
1. TV...
Hello,
i am new to this and it has probably be discussed on a thread already, but i couldn't find it so if anyone can help i would be ver appreciative. Ok so i went through the WebEPG Configuration as the setup page told me. I followed the directions exactly and i got nothing. Not only can i not get any TV guide but i don't know...
Hello,
i am new to this and it has probably be discussed on a thread already, but i couldn't find it so if anyone can help i...
Hello,
i am new to this and it has probably be discussed on a thread already, but i couldn't find it so if anyone can help i...
TV-Server Version: TVE2
MediaPortal Version: 0.2.3.RC2
MediaPortal Skin: Blue Two
Windows Version: Win XP SP2
CPU Type: AMD AThlon 64 X2 4200+
HDD: Western Digital 200 GB
Memory: 2 GB DDR2
Motherboard: Asus NF8-E
Motherboard Chipset: Nvida Nforce
Motherboard Bios: Phoenix
Video Card: Nvidia Geforce 6600LE
Video Card Driver...
TV-Server Version: TVE2
MediaPortal Version: 0.2.3.RC2
MediaPortal Skin: Blue Two
Windows Version: Win XP SP2
CPU Type: AMD...
TV-Server Version: TVE2
MediaPortal Version: 0.2.3.RC2
MediaPortal Skin: Blue Two
Windows Version: Win XP SP2
CPU Type: AMD...