mm1352000
My logs can found here
https://forum.team-mediaportal.com/general-support-51/tv-server-dvb-s2-controller-stops-working-after-accessing-dvb-t-controller-95136/
mm1352000
My logs can found here...
My HTPC runs on Win7 Ultimate 32 bit and I have TBS Qbox S2 USB DVB-S2.
Main problem is multiswitch. I have two LNB. Thirst one is...
Hi, my hauppauge HVR-1100 seems to be misbehaving, in some way something goes wrong and i get a negative image like in black becomming white and white black, also the colors offcourse.
Nothing seems to be wrong with the tv-server and tried several codecs, so i was wondering, has anyone got an idea?
The picture is as smooth as it...
Hi, my hauppauge HVR-1100 seems to be misbehaving, in some way something goes wrong and i get a negative image like in black...
Hi, my hauppauge HVR-1100 seems to be misbehaving, in some way something goes wrong and i get a negative image like in black...
I have a FloppyDTV S2 Running with Win 7 X64 Driver 5.7 and MP1.1.2 without Problems.
BTW: Digital Everywhere was taken over by Digital Devices and when there will Be a New Driver, you'll find it on their Website.
Michael
I have a FloppyDTV S2 Running with Win 7 X64 Driver 5.7 and MP1.1.2 without Problems.
BTW: Digital Everywhere was taken over by...
A question for the owners of the FloppyDTV´s:
I want to reinstall my MP machine with Windows 7 x64. There is a driver version 5.7...
damn, my fault didnt remember to move those bda drivers ttusb2bda.* in root of the MP directory
Thank you very much ! without you i probably not using this right now and had lose very cool media center software.
This Mediaportal cant be even compared to dvbviewer, didnt like dvbviewer at all in any perspective too complicated and...
damn, my fault didnt remember to move those bda drivers ttusb2bda.* in root of the MP directory
Thank you very much ! without you i...
Hello,
Is it possible to get Technotrend Remote working with Media portal ? :)
Would be supergreat, if there is some...
Hi, I'm looking into getting a dvb-t2 tuner. Last time I looked (about 6 months ago) there were none, but now there seems to be a few to choose from:
PCTV Nanostick T2 290e (usb dongle)
Blackgold BGT3620 (pci-e multi hybrid)
Geniatech MyGica T200 (external box, USB connection)
Anysee E7 ETC (external box, USB connection)...
Hi, I'm looking into getting a dvb-t2 tuner. Last time I looked (about 6 months ago) there were none, but now there seems to be a...
Hi, I'm looking into getting a dvb-t2 tuner. Last time I looked (about 6 months ago) there were none, but now there seems to be a...
Hello, I am having trouble using MediaPortal with the Hauppauge WinTV Ministick and the WinTV CI USB.
Works well with WinTV 7 software, and I am running the newest drivers: CI Modul running driver 1.3607.26283.0 and Win TV Ministick running 4.2.26.28027.
I can search the channel list, but only when using the built in Media Portal...
Hello, I am having trouble using MediaPortal with the Hauppauge WinTV Ministick and the WinTV CI USB.
Works well with WinTV 7...
Hello, I am having trouble using MediaPortal with the Hauppauge WinTV Ministick and the WinTV CI USB.
Works well with WinTV 7...
Re: AW: Digital Devices Cine S2 vs. Mystique SaTiX-S2 Dual
Hello Bernhard,
I am running linux ubuntu but I would like to support this card that I just purchased
Regards
Re: AW: Digital Devices Cine S2 vs. Mystique SaTiX-S2 Dual
Hello Bernhard,
I am running linux ubuntu but I would like to support...
Digital Devices Cine S2 vs. Mystique SaTiX-S2 Dual...
Are they the same card? Any differences in drivers?
Also looks like the...
Well, I decided to unload TotalMedia and instal MediaPortal to see if it works. In short, it does seem to support the HDTV Stick I have. But this is all too complex and slow on my machine. So I have uninstalled and gone back to the most stable version of TotalMedia I have. Thanks.
Well, I decided to unload TotalMedia and instal MediaPortal to see if it works. In short, it does seem to support the HDTV Stick I...
Hello. I am pretty much a newbie to all of this so I apologize in advance for any stupid questions. I recently purchased a Mygica...
I am still sorting out a problem with my graphics card driver to get its TV out functionality working so I've been holding off on the TV card. I am still thinking the Hauppauge 1600 or possibly the V-Box DT150 card. From my research on the forum here, it seems both cards play well with MediaPortal although it is hard to find any...
I am still sorting out a problem with my graphics card driver to get its TV out functionality working so I've been holding off on...
Hi everyone,
I am currently building my first HTPC :) and I really could use some help picking the right tuner card. :wtf...
AW: Recommendation for Videocard needed
thx for the reply.
I already purchased in the meantime a Hauppauge HVR 4400 card (supports DVB-T, -S2 and analog) as I needed a PCIe card. Only tested analog, seems like it works with my poor performant system. I´ll give -S and S2 a go as soon as I connect it to sat.
AW: Recommendation for Videocard needed
thx for the reply.
I already purchased in the meantime a Hauppauge HVR 4400 card...
Hi,
I am currently running Mediaportal 1.1.3 on Windows 7 Ulimate SP1 64 bit.
My HTPC consists of the following parts:
Zotac...
I can not install this driver (AD-SP300).
"Ett fel uppstod när enheten installerades.
Namnet används redan som ett tjänstnamn eller som visningsnamn för en tjänst"
How did you manage to do that?
I can not install this driver (AD-SP300).
"Ett fel uppstod när enheten installerades.
Namnet används redan som ett tjänstnamn...
I don't know if it is mentioned earlier.
but there is new mantis driver for twinhan / azurewave ad cp400 and others that use same...
Hi,
yes, I still have it and I have managed to make it work under Windows 7 Ultimate 64bit. DiseqC does position the dish automatically and all works well.
I am not using it very extensively as I have switched more to using the OnlineVideos plugin rather than live tv. Also, I had some problems getting some TV Server plugins (their...
Hi,
yes, I still have it and I have managed to make it work under Windows 7 Ultimate 64bit. DiseqC does position the dish...
Hello,
I am using the QBox II USB external DVB-S2 tuner. It works perfectly well with the supplied BDA drivers, however, I am...
Hallo
Ich spreche kein Deutsch, also bin ich mit Google Translate.
Sie sollten sich wirklich veröffentlichen Sie Ihr Problem in der deutschen Sektion des Forums, wenn man nicht per Post in englischer Sprache.
Ist die CTX909 benötigen ein Kabel an die Soundkarte angeschlossen werden? Wenn ja, wird es nicht unterstützt...
Hallo
Ich spreche kein Deutsch, also bin ich mit Google Translate.
Sie sollten sich wirklich veröffentlichen Sie Ihr Problem...
Hallo Fachleute,
ich benutze seit 5 Jahren Mediaportal und bin soweit sehr zufrieden mit der MCE Software.
Ich möchte nun...
Well CBeebies won't be broadcast in HD anyway, so DVB-T2 would make no difference in that respect. There are only 4 HD channels on Freeivew, one from each of the terrestrial broadcasters, and it's unlikely there will be more, at least for a long long time.
What programs are they? Are they available on DVD? I picked up a bunch of TV...
Well CBeebies won't be broadcast in HD anyway, so DVB-T2 would make no difference in that respect. There are only 4 HD channels on...
Has anybody used the Blackgold card to capture programmes from Sky?
I've got the original Sky+ HD box (the Thomson one) but my...
I only had problems with it. TV always freezed after some hours, only rebooting made the card working again (for some hour(s)).
I foud out that the lnb IC on the cinergy was extremely hot > 150 degrees and then the internal protection switches it off (datasheet). I had a short cicuit in the coax cable when I used the card for the...
I only had problems with it. TV always freezed after some hours, only rebooting made the card working again (for some hour(s)).
I...
Hi,
With this card, my signal quality is always 49% and signal level 0%, for all channels.
I try with ProgDVB, and others...
Thanks mate ! Maybe this site could offer a solution :
C&E DVB-T USB 2.0/1.1 Adaptor drivers
Thanks mate ! Maybe this site could offer a solution :
C&E DVB-T USB 2.0/1.1 Adaptor drivers
Hi,
ages ago I baught a Taiwan Brand Noname USB DVBT Stick "Cardio"
USB Digital TV Receiver For PC Manufacturer
Someone in...
Hej!
Im guessing that you are talking about DVB-S, right!
If so take a look here Canal Digital on Thor 5/6 at 0.8°W - LyngSat
This should give you a good understanding of number of transponder transmitting your wanted channels.
/tompa
Hej!
Im guessing that you are talking about DVB-S, right!
If so take a look here Canal Digital on Thor 5/6 at 0.8°W - LyngSat...
Have a question about canal digital in sweden because mediaportal can stream channels which is on the same
transponder, how many...
I've just picked up one of these to replace my aging skystar 2 in my setup. unfortunately compared to the other cards i have which are rock solid I get discontinuities/ glitches with the tevii s464 even on FTA channels with a more than ample signal!
I've discovered that the older Driver.20100421 are less likely to give a dropped...
I've just picked up one of these to replace my aging skystar 2 in my setup. unfortunately compared to the other cards i have which...
i want play hd channel and he is play but very slow and the System Requirements
Microsoft Windows XP / Vista / 7
2.0GHz CPU...
I figured out how to get the system to use S1 sleep rather than S3 sleep, but it still didn't work reliably coming out of sleep.
I'm not convinced its an issue with the card - i think it may be my hardware setup.
I think that the PCIe bus isn't reinitialised reliably coming out of sleep. I've seen just the display fail coming out...
I figured out how to get the system to use S1 sleep rather than S3 sleep, but it still didn't work reliably coming out of sleep...
Hi,
I have one of these KWorld's in my new HTPC and I'm having a terrible time with it. Has anybody else got one of these...
Hi again
Glad you got it working. :)
If you have two LNBs and a switch then it only makes sense that you would need to apply the right command to receive channels from the LNB that you wanted to pick up. The fact that other receivers and tuners in the house work with DiSEqC = none seems like luck to me. Either the switch was set on...
Hi again
Glad you got it working. :)
If you have two LNBs and a switch then it only makes sense that you would need to apply the...
Hi,
I have two htpcs, one with a KNC1 working great and another one with a tt 3200 which can´t find channels (most freqs "NO...
Hi Motor - thanks for the post.
I guess that's the end of this card for me :( I'll leave it sitting in the server and hope that in future versions the HDMI &/or component inputs become supported.
Thanks to both you and mm1352000 for the posts - I would have burnt a lot more hours on this without your posts :)
Hi Motor - thanks for the post.
I guess that's the end of this card for me :( I'll leave it sitting in the server and hope that...
Hi - anyone seen or tried the AVerTV CaptureHD? See: AVerMedia AVerTV Global - AVerTV TV Tuners and Multimedia Products - AVerTV...
Hi all,
I am looking to set up my first Media Portal PC. We currently use an over the air antenna and Netflix as our viewing material. I would like to enable the PC to be viewed whole house as would I the antenna via a splitter and video switch at my coax junction point in my basement. This requires a tuner card with an RF...
Hi all,
I am looking to set up my first Media Portal PC. We currently use an over the air antenna and Netflix as our viewing...
Hi all,
I am looking to set up my first Media Portal PC. We currently use an over the air antenna and Netflix as our viewing...
beolink: the logs don't show anything useful. I need to see logs that show you tuning to an FM radio and an analog TV channel...
beolink: the logs don't show anything useful. I need to see logs that show you tuning to an FM radio and an analog TV channel...
I have a Terratec Cinergy HT PCI KMII, dual core with a P5G41T-M LE from ASUS and 4GB. I have tried both internal INTEL VGA and a...
Hi again Magilla
Another strange error! :S
I can say there is definitely nothing wrong with TV Server - both the analog and digital channels were successfully tuned, and timeshifting started (which is good :)). I believe there is a problem with your MediaPortal codec or renderer settings since I see the following in your...
Hi again Magilla
Another strange error! :S
I can say there is definitely nothing wrong with TV Server - both the analog and...
Hi guys
I borrowed a PCI Hybrid tuner off a mate to test with MediaPortal, which seems to be pretty good software, however, I get...
Just be aware the component input on the e900f is only low res (480 and 576) not 720 or 1080
I "upgraded" to an avermedia capturehd but due to the limitations in MP and the driver configuration of this software encoding card cannot use the component or hdmi inputs. The dvb-t tuner and composite and s video inputs are accessible but...
Just be aware the component input on the e900f is only low res (480 and 576) not 720 or 1080
I "upgraded" to an avermedia...
Hello everyone,
In an effort to save a little we have decided to get out information services from our cable company (I'm in the...
Hi, Im from Spain using an AverTV Capture HD 727, well it has just a single tuner (not a dual one) but it works without any problem under Mediaportal and also its remote control with an extra Mediaportal plugin, works to control Mediaportal just great. All button works.
Viktor
Hi, Im from Spain using an AverTV Capture HD 727, well it has just a single tuner (not a dual one) but it works without any problem...
Hi everybody!,
I bought a Kworld DVBT-PE310, but I'm having some troubles with it (pixels, lost signal...)
What TV Card, with...
Cheers, I'll let you know how I go.
Cheers, I'll let you know how I go.
Hi All,
I was wondering if anyone can tell me if analog input from this device is supported. My fanless HTPC died (water cooling...
I used a gygabyte ga-eg41... motherboard (intel g41 chipset) in the past and I had no problems with my cine s2.
I used a gygabyte ga-eg41... motherboard (intel g41 chipset) in the past and I had no problems with my cine s2.
Hi!
Since one year I'm fighting against BSODs caused from my Mystique Satix S2 Dual (same as DD Cine S2) card in my XFX Geforce...
Hi,
I'm considering getting the new BlackGold DBV-T2 card. My difficulty lies with my motherboard. I have 2 x PCI slots and 2 x PCI-e slots. The BlackGold card is PCI-e. I could remove my Hauppage PCI card and using a converter like this get another PCI-e slot.
Has anybody used this type of converter and will it work...
Hi,
I'm considering getting the new BlackGold DBV-T2 card. My difficulty lies with my motherboard. I have 2 x PCI slots and 2 x...
Hi,
I'm considering getting the new BlackGold DBV-T2 card. My difficulty lies with my motherboard. I have 2 x PCI slots and 2 x...
I would like to replace my Terratec Cinergy HT PCI MKII if i can't get it to work. Is WinTV-HVR-1700HD PCI a good working TV-Card? I would like to have support for radio, analog TV an digital cable TV.
The result will be a media portal in my spa with a touchscreen and speakers in the ceiling. I am on deep water now so let's how it...
I would like to replace my Terratec Cinergy HT PCI MKII if i can't get it to work. Is WinTV-HVR-1700HD PCI a good working TV-Card...
I would like to replace my Terratec Cinergy HT PCI MKII if i can't get it to work. Is WinTV-HVR-1700HD PCI a good working TV-Card...