Yes i had done that. But I saw know then you mentioned about the ext. that my files had the ext. m2ts instead. So i had to add that in MP Conf Video extension list.
So know i can see the movies. Thanks.
But the sound will disappear after 30 sec of the movie??? I don't know why???? I will start i new tread about that.
Regards
Yes i had done that. But I saw know then you mentioned about the ext. that my files had the ext. m2ts instead. So i had to add that...
Hi,
If i browse with My Videos "plug-in" to the folder there i have all my AVCHD files.
The folder will be empty and i will not...
Would you mind if I reopened it for a moment?
I may have the same problem. I've been ripping my own DVDs to MKV files and have found that AAC audio works fine, but when I copy AC3 audio tracks the resulting MKV files do not play in MP 1.1.0 Final when I use directshow HDMI audio. They do exactly as you describe, I see a flicker of...
Would you mind if I reopened it for a moment?
I may have the same problem. I've been ripping my own DVDs to MKV files and have...
MediaPortal Version: 1.1 RC5
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 Home Premium 32bit
CPU Type: AMD X2 240e...
I had the same experience and after reboot of MP, it disappeared for a while (to reappear again some time later)
But I do not have this problem anymore since a few weeks.
I don't now if that was before or after I installed the final 1.1.
Furthermore FFdshow has a setting for it, see automatiic cropping.
Succes,
Ben
I had the same experience and after reboot of MP, it disappeared for a while (to reappear again some time later)
But I do not have...
MediaPortal Version: MP 1.1 Final (with Owlroost's V37, Miroslav22's Sky EPG Grabber, and Gibmans Graphpause)
MediaPortal Skin...
Scratch the above, 1080p is unplayable in MovingPictures as well. I'll post logs tomorrow.
BTW. can my problems be caused by using a 64-bit OS? SAF shows during installation that my OS is unsupported...
Scratch the above, 1080p is unplayable in MovingPictures as well. I'll post logs tomorrow.
BTW. can my problems be caused by...
MediaPortal Version: 1.1 RC6
MediaPortal Skin: Black Glass Nova
Windows Version: Win7 Home Premium x64
CPU Type: Intel Atom 330...
how r u extracting the subtitle out from the blu-ray? it should come from the PGS stream on the blu-ray disc
i found a guide, used it the other day and it works a treat...make sure u have all the apps installed :
How-to-extract-subtitles-from-a-Blu-ray-and-convert-to-srt-or-sub-idx
as far as i know u cannot read the...
how r u extracting the subtitle out from the blu-ray? it should come from the PGS stream on the blu-ray disc
i found a guide...
MediaPortal Version: 1.1.0 Final
MediaPortal Skin: Blue3wide
Windows Version: XP SP3
CPU Type: Athlon II X2 250
HDD: Seagate...
I have the same with all live DVB-C TV streams and some streaming trailers (Trailers plugin), but not with MKV's?!
It appears to me that some audio streams get in a strange audio processing loop?!?
I am using the digital output to my surround set.
I have the same with all live DVB-C TV streams and some streaming trailers (Trailers plugin), but not with MKV's?!
It appears to...
MediaPortal Version: 1.2 RC6
MediaPortal Skin: Black Glass (or standard)
Windows Version: Windows 7
CPU Type: Intel ATOM 330...
In a previous version of MP I could fast forward after watching something to skip the end credits of a movie and it would automatically end and return to the menu of wherever I stared it from. If I do that with the latest version of MP with the latest versions of Moving Pictures and TV Series it goes to the end of the movie or episode...
In a previous version of MP I could fast forward after watching something to skip the end credits of a movie and it would...
In a previous version of MP I could fast forward after watching something to skip the end credits of a movie and it would...
I would not worry too much about that, channel changes are too frequent, use comskip to cut out the adverts on recordings, and you are viewing that channel for even less amount of time :)
I would not worry too much about that, channel changes are too frequent, use comskip to cut out the adverts on recordings, and you...
MediaPortal Version: 1.1 RC4
MediaPortal Skin: Maya
Windows Version: win 7
CPU Type: 330 atom
HDD:
Memory: 2 gb
Motherboard: asus...
I guess this should be possible with this (experimental) patch: https://forum.team-mediaportal.com/submit-code-patches-mediaportal-tv-server-etc-325/integration-ffdshow-82613/
I guess this should be possible with this (experimental) patch...
Where is the brightness and contrast settings? I find that many videos playback dark and I need to adjust 'within' MP, not Windows...
AW: 24Hz and 23.976Hz simultaneously on ATI
If you have a ATI card then just set "23" and "24" as refreshrate in the displayrate changer within the Mediaportal setup. "23" will switch to 23,976 Hz and "24" to 24 Hz. That works for me.
AW: 24Hz and 23.976Hz simultaneously on ATI
If you have a ATI card then just set "23" and "24" as refreshrate in the displayrate...
This is a general question regarding refresh rate on ATI cards. I'm on WIN7 and I enabled 1080/24p mode. In CCC there is now...
I found this on an NVIDIA forum and it works perfect for me!
Create a custom resolution with this parameters:
I tried ReClock before but the sound got async cause i accepted bitstream formats. With this settings no ReClock is needed for me. The only problem is if u also have exact 24p movies.. but i dont have many of them...
I found this on an NVIDIA forum and it works perfect for me!
Create a custom resolution with this parameters:
I tried...
MediaPortal Version: 1.1.0
MediaPortal Skin: Black Glass
Windows Version: Windows XP + SP3
CPU Type: Intel E5200
HDD: WD 1Tb...
Hi, I am running the latest MediaPortal and everything works wonderfully with my Dell MCE remote. The only problem I am having is pausing video, when I press pause on the remote it flashes 'pause' ever so quickly in the corner but the video never actually stops. The only way of getting around this is to stop the video completely and...
Hi, I am running the latest MediaPortal and everything works wonderfully with my Dell MCE remote. The only problem I am having is...
Hi, I am running the latest MediaPortal and everything works wonderfully with my Dell MCE remote. The only problem I am having is...
OK this version of MP didn't help either. But I found what is causing this problem. It has something to do with ATI drivers or W7 by itself. Normally I launch MP on secondary display (LCD TV) but when I disable dual monitor setup and use TV as primary display problem is gone. I did little research and found this thread on TechNet...
OK this version of MP didn't help either. But I found what is causing this problem. It has something to do with ATI drivers or W7...
MediaPortal Version: 1.1.0 RC4
MediaPortal Skin: Black Glass Nova
Windows Version: 7 Ultimate x64
CPU Type: Intel Core i7-860 @...
btw ac3filter handle 5.1 aac very well, so if it is 5.1 AAC you may find the channels are reversed. also a lot of receivers can't handle 5.1 AAC via passthrough, you may find that ac3filter does 5.1 AAC -> AC3 -> SPDIF rather than 5.1 AAC -> SPDIF.
If it ac3filter does 5.1 AAC -> SPDIF and your receiver doesn't support 5.1 AAC you...
btw ac3filter handle 5.1 aac very well, so if it is 5.1 AAC you may find the channels are reversed. also a lot of receivers can't...
MediaPortal Version: 1.0.2
MediaPortal Skin: bluewide
Windows Version: Vista Premium 32bit SP2
CPU Type: AMD 4850e 2.5Ghz X2...
Greetings,
I'm attempting to automate my HTPC in my living room and am looking for a couple of specific functions. First off I have an HTPC set up in my living room (we watch mostly classic TV), but searching through thousands of files takes even longer than to watch the actual show! I wanted to see if there was a program that would...
Greetings,
I'm attempting to automate my HTPC in my living room and am looking for a couple of specific functions. First off I...
Greetings,
I'm attempting to automate my HTPC in my living room and am looking for a couple of specific functions. First off I...
just found this:
[confirm] RC3 cant play divx and avi files unless video codec set to MPC MPeg2 decoder - MediaPortal Forum
seems to be the same problem
just found this:
[confirm] RC3 cant play divx and avi files unless video codec set to MPC MPeg2 decoder - MediaPortal Forum
seems...
Hello all,
I have just upgraded from RC1 to RC3, via the "update" option.
Since the update, I can not play any avi/divx/xvid...
Re: No video when when playing Prerecoded TV and DVDs with RC4
'MediaInfo.dll' is located in C:\Program Files\Team MediaPortal\MediaPortal
Looking at this problem again I noticed that it is only one Prerecorded TV program and one DVD file that is not displaying video, so I'll consider this problem resolved.
Thanks for your reply.
Re: No video when when playing Prerecoded TV and DVDs with RC4
'MediaInfo.dll' is located in C:\Program Files\Team...
I get only audio when playing both Prerecorded TV and DVDs after installing 1.1.0.0 RC4. I am using the same codecs and renderers...
Hi there,
is there a way to call up the properties of the used filters during playback? Think of rightclicking in MPC. This allows me to change filter properties (most interestingly of course ffdshow) and see the results in realtime.
I am running RC2 in win7.
Thanks and best regards
Patrick
:cool:
Hi there,
is there a way to call up the properties of the used filters during playback? Think of rightclicking in MPC. This...
Hi there,
is there a way to call up the properties of the used filters during playback? Think of rightclicking in MPC. This...
Have a similar issue to yours (running RC2) which i thought was down to codecs, So far i can get every movie to play (all mkv's) when i disable moving pictures and just access them through the normal Video listing. If i enable Moving Pictures the only way they will play is if i run from the Debug mode, they will all play fine.
Have a similar issue to yours (running RC2) which i thought was down to codecs, So far i can get every movie to play (all mkv's)...
MediaPortal Version: MP 1.1 RC2
MediaPortal Skin: Blue3 Wide
Windows Version: W7x64 (fully patched)
CPU Type: AMD Phenom II X3...
MediaPortal Version: 1.1.0 RC1
MediaPortal Skin: Blue3
Windows Version: Windows 7/64
CPU Type: AMD 4850e
HDD: Western Digital 1TB Green (3x). WD 2TB green (2x)
Memory: 4gb DDr2
Motherboard: Asus M3A78-EM
Video Card: Saphire 4670
Video Card Driver: Current
Sound Card: Realtek AC-97
Sound Card AC3: Optical out
Sound Card...
MediaPortal Version: 1.1.0 RC1
MediaPortal Skin: Blue3
Windows Version: Windows 7/64
CPU Type: AMD 4850e
HDD: Western Digital...
MediaPortal Version: 1.1.0 RC1
MediaPortal Skin: Blue3
Windows Version: Windows 7/64
CPU Type: AMD 4850e
HDD: Western Digital...
I have tried upgrading my graphics card to an ATI 5450 (from an X1300) and still have the same issue.
I've solved this! Turns out if I plug the client directly into my router (100mbps) rather than going via my gigabit switch the problem goes away. This doesn't really explain why everything played back fine through normal windows though.
I have tried upgrading my graphics card to an ATI 5450 (from an X1300) and still have the same issue.
I've solved this! Turns out...
It seems to be any .TS file, whether it's mpeg2 or h.264. Any .ts files when played from within MP just stutter like crazy and the...