All BBC Channels Missing - Winterhill UK (1 Viewer)

Owlsroost

Retired Team Member
  • Premium Supporter
  • October 28, 2008
    5,539
    5,038
    Cambridge
    Home Country
    United Kingdom United Kingdom
    Drop the attached file into C:\ProgramData\Team MediaPortal\MediaPortal TV Server\TuningParameters\dvbt - I've added the new frequencies - and try a channel scan.
     

    Attachments

    • UK.Winter Hill.xml
      1 KB
    Last edited:

    jpskiller

    Portal Member
    May 30, 2005
    24
    1
    UK
    since new xml file, I have an issue, channel 4, more 4, E4, Channel 4+1, Channel 5 and ITV2 all have channel seq number 1000 which I cant alter so appear at bottom of channels in guide and also dont get any EPG information for them

    any help pls
     

    Holzi

    Super Moderator
  • Team MediaPortal
  • April 21, 2010
    7,934
    2,235
    Ba-Wü
    Home Country
    Germany Germany

    jpskiller

    Portal Member
    May 30, 2005
    24
    1
    UK
    Cheers gave that a try and seems to have fixed the issue, just make sure to delete all channels first and re-scan
     

    Youngster

    Portal Member
    March 11, 2013
    14
    0
    45
    Home Country
    United Kingdom United Kingdom
    Owlsroost, any idea why I don't have that file path? maybe because i'm on a 64bit system? Have tried searching for TuningParameters but no joy. I'm on a first time installation but have booted MP up to see if the folders were created after initial boot - still no joy......my wife will kill me if I can't get BBCs working....
     

    Users who are viewing this thread

    Similar threads

    As Alexander Pope said: A little learning is a dangerous thing, and Dr Google explains this as: The quotation warns that superficial knowledge of a subject can make people arrogant or foolish, suggesting one should either learn deeply or not at all. "Superficial", and "arrogant or foolish" would be me :eek: . However... I would...
    As Alexander Pope said: A little learning is a dangerous thing, and Dr Google explains this as: The quotation warns that...
    I have just discovered that I can no longer receive any of the independent radio channels broadcast on DVB-T in the UK. In...
    Replies
    12
    Views
    4K
    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV...
    Hi everyone, I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
    Replies
    8
    Views
    1K
    4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1
    4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...
    My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...
    Replies
    5
    Views
    2K
    MP1 MP2 Recording length DE
    If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24 hours. However... That is using the "conventional" TV sources, i.e. a DVB-T tuner, a DVB-S tuner, or an analogue tuner. You stated in your other thread that you are using an IPTV source. Perhaps there is a...
    If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24...
    Is there a limit to recording length? My TVServer recordings all cut off at 3 hours but I can't find a setting anywhere to change...
    Replies
    1
    Views
    207
    I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab: The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
    I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server...
    I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each) Is there...
    Replies
    1
    Views
    812
    Top Bottom