BlackGold BGT3630 - When will disecq be supported..? (1 Viewer)
- Thread starter retro
- Start date
)- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
DiSEqC 1.0 4 port switching will be supported with the next generation TV Server. It should already work with MediaPortal 2 and the corresponding version of TV Server:
https://forum.team-mediaportal.com/threads/testbuilds-for-native-mp2-tv.114068/
[edit: I note that as far as I know the drivers are not capable of sending raw DiSEqC commands, so motor/positioner and 16 port DiSEqC support are not planned.]
https://forum.team-mediaportal.com/threads/testbuilds-for-native-mp2-tv.114068/
[edit: I note that as far as I know the drivers are not capable of sending raw DiSEqC commands, so motor/positioner and 16 port DiSEqC support are not planned.]
Last edited:
Users who are viewing this thread
Similar threads
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
If it's an apartment block, it's quite likely that the LNB is something exotic that handles Sky and others. Try a different LNB frequency (and possibly the low and high frequency settings. I know little of such things, but apparently Sky is often 10750. Give it a try. Freeview is horizontally polarised.
If it's an apartment block, it's quite likely that the LNB is something exotic that handles Sky and others. Try a different LNB...
Satellite TV in New Zealand is now broadcast from Koreasat 6, which has trundled round from 116E to 160E. Can we have an updated...
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV...
Hi everyone,
I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which I might do if the issue persists.
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format". Not sure what that means, but to test that, I downloaded a copy of Capture4Me, and indeed, it switches LNBs without any issues with minimal configuration (just set DiSEqC to 1.x A/B/C/D and select the...
Brief update... Hauppauge support responded quickly, stating that the "driver for all of our product confirm to the BDA format"...
Due to ongoing issues with my TBS5520SE USB tuner, I've invested in a Hauppauge WinTV-NOVA-S2 tuner. I have a multi-LNB setup...