clients stop, svn12640 (1 Viewer)

josu

Portal Pro
March 14, 2006
192
0
Kassel, Germany
Home Country
Germany Germany
Hello,
here a new problem: my both clients (2x without server) stopped after some time , the tv-picture freezes :eek:

:oops:
 

elliottmc

Retired Team Member
  • Premium Supporter
  • August 7, 2005
    14,927
    6,061
    Cardiff, UK
    Home Country
    United Kingdom United Kingdom
    Hi,

    I have also seen crashes after some time with the clients.

    Looking at this section of the streaming server log

    16-01-2007 16:31:28 Adding file T (805306272)
    16-01-2007 16:31:28 Failed to open file T : 2
    16-01-2007 16:31:28 Adding file V (805306272)
    16-01-2007 16:31:28 Failed to open file V : 2
    16-01-2007 16:31:28 Adding file (805306272)
    16-01-2007 16:31:28 Failed to open file : 3
    16-01-2007 16:31:28 Adding file S (805306272)
    16-01-2007 16:31:28 Failed to open file S : 2
    16-01-2007 16:31:28 Adding file e (805306272)
    16-01-2007 16:31:28 Failed to open file e : 2
    16-01-2007 16:31:28 Adding file r (805306272)
    16-01-2007 16:31:28 Failed to open file r : 2
    16-01-2007 16:31:28 Adding file v (805306272)
    16-01-2007 16:31:28 Failed to open file v : 2
    16-01-2007 16:31:28 Adding file e (805306272)
    16-01-2007 16:31:28 Failed to open file e : 2
    16-01-2007 16:31:28 Adding file r (805306272)
    16-01-2007 16:31:28 Failed to open file r : 2

    The letters which are used as filenames spell "TV Server". The bits in the log around this are other letters for the file path. It looks as though the server is trying to add files one letter at a time rather than the complete path, although this may be a simplification.

    I'm not too clear about your setup, but I guess one more both of your clients is also the server. This log would suggest to me that it is the server functionality which is causing the problem, but I am not a MP developer, so I may be jumping to conclusions.

    Just trying to be helpful.

    Mark
     

    josu

    Portal Pro
    March 14, 2006
    192
    0
    Kassel, Germany
    Home Country
    Germany Germany
    Hi,

    I have also seen crashes after some time with the clients.

    Looking at this section of the streaming server log

    16-01-2007 16:31:28 Adding file T (805306272)
    16-01-2007 16:31:28 Failed to open file T : 2
    16-01-2007 16:31:28 Adding file V (805306272)
    16-01-2007 16:31:28 Failed to open file V : 2
    16-01-2007 16:31:28 Adding file (805306272)
    16-01-2007 16:31:28 Failed to open file : 3
    16-01-2007 16:31:28 Adding file S (805306272)
    16-01-2007 16:31:28 Failed to open file S : 2
    16-01-2007 16:31:28 Adding file e (805306272)
    16-01-2007 16:31:28 Failed to open file e : 2
    16-01-2007 16:31:28 Adding file r (805306272)
    16-01-2007 16:31:28 Failed to open file r : 2
    16-01-2007 16:31:28 Adding file v (805306272)
    16-01-2007 16:31:28 Failed to open file v : 2
    16-01-2007 16:31:28 Adding file e (805306272)
    16-01-2007 16:31:28 Failed to open file e : 2
    16-01-2007 16:31:28 Adding file r (805306272)
    16-01-2007 16:31:28 Failed to open file r : 2

    The letters which are used as filenames spell "TV Server". The bits in the log around this are other letters for the file path. It looks as though the server is trying to add files one letter at a time rather than the complete path, although this may be a simplification.

    I'm not too clear about your setup, but I guess one more both of your clients is also the server. This log would suggest to me that it is the server functionality which is causing the problem, but I am not a MP developer, so I may be jumping to conclusions.

    Just trying to be helpful.

    Mark

    :D mark

    I Have two network-clients and one on the server. At this log-time there was running only the two network-clients.

    Since that time up to now I has no errors on one client:oops:

    I will test again now with two network clients running at the same time ;)
     

    josu

    Portal Pro
    March 14, 2006
    192
    0
    Kassel, Germany
    Home Country
    Germany Germany
    Ok, I have tested again.

    The RTSP-streamer stopped everytimes after TVMovie-clickfinder-import.:eek:

    Strangely is it, that in tve-mmc under the category "streamingserver" the client is active and my hub is active, too.

    The client on my server runs further, only the network-clients hangs up !

    I dont understand this behavior:confused: :confused: :confused: :confused: :mad:
     

    Users who are viewing this thread

    Similar threads

    Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal. Maybe helpful for someone in the future. Thanks for the...
    Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
    Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...
    Replies
    5
    Views
    2K
    Thanks guys. Ok, spent the (whole) weekend on this lol. First; TVHeadend/Kodi.... Nah. Given up on that - 'non-tech'; its horrible. 'Tech' - a few reasons but mostly that it is buggy. It is actually a real shame as it does have potential and promises a lot (was great to have Kodi on my phone and be able to watch live/recordings...
    Thanks guys. Ok, spent the (whole) weekend on this lol. First; TVHeadend/Kodi.... Nah. Given up on that - 'non-tech'; its...
    So, a very long-time MP fan here. Family have used MP (Only MP1 as all addicted to Titan skin) for ever - for my 13yo, thats 100%...
    Replies
    5
    Views
    4K
    MP1 MP2 MP2 - V2.3 EPG has stopped DE
    The only configuration that is certain to work is when the MP client and MP server are from the same release. It is sometimes possible to use MP clients from a release that is different to the MP server, but whether it works depends on the specific changes that were made between the two releases. -- from CyberSimian in the UK
    The only configuration that is certain to work is when the MP client and MP server are from the same release. It is sometimes...
    Before you create this bug report: Make sure that your system (Windows, codecs and drivers) is up to date, matching the...
    Replies
    10
    Views
    4K
    I haven't tested it. I use MP1, but sometimes I try to help with MP2 :).
    I haven't tested it. I use MP1, but sometimes I try to help with MP2 :).
    This happened immediately after my Windows 11 x64 monthly update for November. The update included also cumulative update to .NET...
    Replies
    9
    Views
    950
    Maybe the server is/was too busy when you tried to authenticate. I occasionally run into that too, also with the opensubtitles api I regularly get 429's... there isn't much that can be done about it, except making sure the software isn't hammering the service and having patience...
    Maybe the server is/was too busy when you tried to authenticate. I occasionally run into that too, also with the opensubtitles api...
    Hello, Hello, when I try to authorize trakt configuration for mediaportal using the trakt plugin, I get the following error...
    Replies
    1
    Views
    261
    Top Bottom