Compro DVB-T: USB stick - Model U3 (1 Viewer)
- Thread starter gazza
- Start date
I have one and it didn't work with TVE2 but with the new TV engine it works perfectly. Much better than my Dvico cards.
If you feel adventurous try the new TV engine. For me it works much better than the older one.
If you feel adventurous try the new TV engine. For me it works much better than the older one.
Gidday mate! Thanks for the reply.
I must admit i'm a total newbie to MP. Can you explain to me the relationship between TVE2 and the new TV engine? And how do you install it? Is there a link? The wikipedia article on TVE2 was hopeless.
Many thanks,
Howie
I must admit i'm a total newbie to MP. Can you explain to me the relationship between TVE2 and the new TV engine? And how do you install it? Is there a link? The wikipedia article on TVE2 was hopeless.
Many thanks,
Howie
I'll give it a go and report back here.Heya buddy..
well i got TVE3 working on it, and it does scan + pickup 29 odd channels. And I can preview each stream in the TV Server configuration.. but within the client when I hit My TV, it has a problem previewing it, i'm getting no audio/video error messages, also unable to timeshift errors.
Have downloaded the latest SVN and everything. I'm stumped.
well i got TVE3 working on it, and it does scan + pickup 29 odd channels. And I can preview each stream in the TV Server configuration.. but within the client when I hit My TV, it has a problem previewing it, i'm getting no audio/video error messages, also unable to timeshift errors.
Have downloaded the latest SVN and everything. I'm stumped.
have you set the recording paths in the TV server section?
You have to set the recording directory and the timeshift directory.
I forgot the timeshift one the first time and got time shift errors.
Also, take a look in the MP /Logs directory and see if there is any thing revealed there. If you can't understand them then post them here.
You are best off starting MP from scratch, go to MyTV, get the error then stop MP. this way the logs won't be too big and will only have the relevant info.
It does work, so don't lose hope.
PS, also make sure the Compro software isn't running, as it may be locking the card if it is. Turn off AutoStart for it if you haven't already.
You have to set the recording directory and the timeshift directory.
I forgot the timeshift one the first time and got time shift errors.
Also, take a look in the MP /Logs directory and see if there is any thing revealed there. If you can't understand them then post them here.
You are best off starting MP from scratch, go to MyTV, get the error then stop MP. this way the logs won't be too big and will only have the relevant info.
It does work, so don't lose hope.
PS, also make sure the Compro software isn't running, as it may be locking the card if it is. Turn off AutoStart for it if you haven't already.
Users who are viewing this thread
Similar threads
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
I see no reason in Windows XP or 7, in my experience, on ancient Atom, Windows 10 worked faster than XP or 7...
I see no reason in Windows XP or 7, in my experience, on ancient Atom, Windows 10 worked faster than XP or 7...
Hi all, I'm new to MediaPortal and looking forward to using it. Just one catch and I apologize if it sounds silly - I want to run...
As Alexander Pope said:
A little learning is a dangerous thing,
and Dr Google explains this as:
The quotation warns that superficial knowledge of a subject can make people arrogant or foolish, suggesting one should either learn deeply or not at all.
"Superficial", and "arrogant or foolish" would be me :eek: . However...
I would...
As Alexander Pope said:
A little learning is a dangerous thing,
and Dr Google explains this as:
The quotation warns that...
I have just discovered that I can no longer receive any of the independent radio channels broadcast on DVB-T in the UK. In...
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback.
If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo.
I have...
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select...
Not sure if this a a bug/config/settings problem.
I am running a media portal 2.5 server with 2.41 client but it seems I get the...
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........
It's getting weirder.....
If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...
Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...