DVB Testing Results (1 Viewer)
- Thread starter dman_lfc
- Start date
A
Anonymous
Guest
where do i have to ask for support of a non bda dvb sat card?
New Zealand
- Thread starter
- #43
TheChaos - In the future yes.
BionicDonkey is looking to get Terrestrial tuning done first before tackling Satellite.
*** Josh - FYI my BDA card does not get recognised in the Binary build you posted earlier. ***
DMAN.
BionicDonkey is looking to get Terrestrial tuning done first before tackling Satellite.
*** Josh - FYI my BDA card does not get recognised in the Binary build you posted earlier. ***
DMAN.
A
Anonymous
Guest
Sorry, but I think my last question wasn't clear enough. I think it sounded like a feature request, but it is not. I meant that I want to help implenting support for the pinnacle pctv sat.
My problem is that I do not really know where to start. I programmed a lot in c#, but never started programming managed directx.
I have some very good informations about the drivers of the card.
c ya
gdp2k
My problem is that I do not really know where to start. I programmed a lot in c#, but never started programming managed directx.
I have some very good informations about the drivers of the card.
c ya
gdp2k
- Thread starter
- #45
BionicDonkey is doing the BDA driver thing.
If you have BDA drivers for your SAT card then I would look to helping him with this SAT tuning interface as I think he'll have most of the other stuff covered at the backend since MS has unified this.
If you dont have BDA drivers then you'll need to leverage the SDK for the card and therefore it's harder to do. As for help in this area it will probably be you doing most of the work unfortunately as people are focused on their own projects.
DMAN
If you have BDA drivers for your SAT card then I would look to helping him with this SAT tuning interface as I think he'll have most of the other stuff covered at the backend since MS has unified this.
If you dont have BDA drivers then you'll need to leverage the SDK for the card and therefore it's harder to do. As for help in this area it will probably be you doing most of the work unfortunately as people are focused on their own projects.
DMAN
A
Anonymous
Guest
Hey Josh,
I gave it a whirl and it built the graph fine but I was unable to tune a channel (only spent about 15 minutes looking at it however). I did have a question.
Just curious why you are using the Smart Tee vs. using 2 graphs with a Stream Buffer in the middle.
Personally if I were building this, I would build the DTV as a standalone configurable plug-in (as you had before). The plug-in would work with a graph up to the stream buffer. Tuning and configuration would occur here. I would perhaps even add features to pipe it to an IP Sink. Then within the TV module, I would simply build a graph to read the buffer and perhaps submit tune requests to the plug-in. The graph could either pull the stream from a local buffer or maybe an IP buffer. Here is an MS link touching on this idea:
http://msdn.microsoft.com/library/d...ectshow/htm/creatingthestreambuffergraphs.asp.
I would like to offer up some help if you would like but I am very new to C#.
Looks good so far, thanks for the effort,
Shane (FullDeck)
I gave it a whirl and it built the graph fine but I was unable to tune a channel (only spent about 15 minutes looking at it however). I did have a question.
Just curious why you are using the Smart Tee vs. using 2 graphs with a Stream Buffer in the middle.
Personally if I were building this, I would build the DTV as a standalone configurable plug-in (as you had before). The plug-in would work with a graph up to the stream buffer. Tuning and configuration would occur here. I would perhaps even add features to pipe it to an IP Sink. Then within the TV module, I would simply build a graph to read the buffer and perhaps submit tune requests to the plug-in. The graph could either pull the stream from a local buffer or maybe an IP buffer. Here is an MS link touching on this idea:
http://msdn.microsoft.com/library/d...ectshow/htm/creatingthestreambuffergraphs.asp.
I would like to offer up some help if you would like but I am very new to C#.
Looks good so far, thanks for the effort,
Shane (FullDeck)
thanks shane i'll look into the idea.
the way that i planed to to it was split it before the demux and render the preview pin first so that the demux can be automated by the network provider for general viewing and manually set the pids the recording on the capture/2nd demux. i don't think it's possible to use 2 demux's in one graph successfully (by successfully i mean talking to the network provider).
does that make sense?? :?
**edit**
i should also add, the stream buffer will be used after i figure out and fix DirectX.Capture class and therefore timeshifting
the way that i planed to to it was split it before the demux and render the preview pin first so that the demux can be automated by the network provider for general viewing and manually set the pids the recording on the capture/2nd demux. i don't think it's possible to use 2 demux's in one graph successfully (by successfully i mean talking to the network provider).
does that make sense?? :?
**edit**
i should also add, the stream buffer will be used after i figure out and fix DirectX.Capture class and therefore timeshifting
nothing has been released, but it's still being developed. waiting for the new configuration stuff to be released by mars warrior
A
Anonymous
Guest
Hey,i have Nexus s, was trunning wintv, junked pro, now run WinXP 64, is there a 64 driver for nexus yet? I do side programming, but have never gotten in to hacking drivers, and id like to contribute...
Users who are viewing this thread
Similar threads
wow this is a weird construction,that will heavily depend on execution order of those 2 parameters in the iff
And as you found out, in your case the order is probably the other way around than you expected...
wow this is a weird construction,that will heavily depend on execution order of those 2 parameters in the iff
And as you found out...
onfocus
Recently I tried coding this:
<onfocus>#(iif(eq(#skin.search.id,0),skin.setstring('#skin.search.id',10)))</onfocus>...
My thoughts:
Indeed the tests are a leftover from long ago and have no real value anymore.
As for things that depend on external sources (imdbscripts, subtitledownloader,onlinevideos etc): that is always a struggle to keep everything (even if you only update those you actually use yourself) working. We do try to find the most stable...
My thoughts:
Indeed the tests are a leftover from long ago and have no real value anymore.
As for things that depend on external...
Trying to scan Cinderella (2021), tt10155932. When I get the IMDB results, the last digit is missing. So it is named "unknown"...
- Sticky
intentionally left blank
intentionally left blank
Skin Properties MediaPortal 1
This thread is intended for all active/ongoing Skin Designers to find out about the available skin...
In the UK, the EPG transmitted in the DVB-T datastream allows each programme to have two genres -- a primary genre, and a secondary genre (i.e. a subgenre).
The primary genre might be something like Film (or Movie in the USA).
The secondary genre for Film might be something like: Action, Comedy, Crime, Fantasy, Romance, Science...
In the UK, the EPG transmitted in the DVB-T datastream allows each programme to have two genres -- a primary genre, and a secondary...
In the UK, the EPG transmitted in the DVB-T datastream allows each programme to have two genres -- a primary genre, and a secondary...
It may seem strange, but the open-source license allows anyone to sell physical CDs or DVDs to customers, provided that, for example, the source code is made available upon request and additional value is provided, such as an installation manual. Both of these are mentioned in the product description, so it appears to be legitimate...
It may seem strange, but the open-source license allows anyone to sell physical CDs or DVDs to customers, provided that, for...
I just recently started using your software and I noticed on eBay one person is selling it for about $16.00. You can make a claim...
