I can't get the PowerScheduler to work (1 Viewer)

Mr. Bean

Portal Pro
June 21, 2005
469
27
Germany
Its a desktop PC in the Livingroom ...

20210411_114257.jpg
 

Mr. Bean

Portal Pro
June 21, 2005
469
27
Germany
So: The IP Adress is now static. I've set it in die Router and Windows Network Card configuration


Set Windows (nothing active) to sleep (Ruhezustand): It comes up after 3 minutes with the Homesreen

Starting MePo in Homescreen and wait the now installed 3 Minutes:
The computer turns off after 3 minutes and turns on again after 3 minutes, the computer turns off after 3 minutes and turns on again after 3 minutes, the computer turns off after 3 minutes and turns on again after 3 minutes, etc., etc. ...

After all, I can now see the MePo home screen directly
 
Last edited:

CyberSimian

Test Group
  • Team MediaPortal
  • June 10, 2013
    2,990
    1,860
    Southampton
    Home Country
    United Kingdom United Kingdom
    The computer turns off after 3 minutes and turns on again after 3 minutes
    It may be that your DHCP manager pings all devices on your network. If that is the case, you will need to disable WOL (wake on lan) on the "Power Management" tab in the network adapter's "Properties" page in "Device Manager".

    It might also be beneficial after making these changes to:
    • Reboot your HTPC.
    • Switch your DHCP manager devicve (ADSL router?) off and on again (to make sure it is using the new config).
    -- from CyberSimian in the UK
     

    Mr. Bean

    Portal Pro
    June 21, 2005
    469
    27
    Germany
    Its a Fritzbox 7490. And the HTPC is rebooting verry often ... because I have it to schwitch OFF to end the endless rebooting ...

    I have the Fritzbox rebooting now!






    So: My Work for the next weekend ...
     
    Last edited:

    Mr. Bean

    Portal Pro
    June 21, 2005
    469
    27
    Germany
    First I've updated the BIOS and disabled the COM Port that I don't use no longer




    I've now taken the Infos from this link and find many devices that can wake up the PC. So all I found are now disabled to wake him up

    This is standing in the wakeuptimer ( second Info:

    20210418_122610.jpg

    After I set him in Windows, MePo not running, in Sleepmode. And he will not waking up for a long time I've wating for that. So I start MePo and wait in Homescreen for set him in Sleepmode. And it will go. And also will not waking up like before ...

    So I hope it will run now


    The only thing is now the Stop button. But this is a oher thread
     

    Mr. Bean

    Portal Pro
    June 21, 2005
    469
    27
    Germany
    Hello again ...

    The HTPC, so the Power Scheduler, will wake up not to the correct time. So, if 20:15 is the beginning of the TV Recording, he has to record 8 Minutes pre and to wake up 7 minutes pre to do this. But je wake up at 20:15 and start to record after the installed 8 minutes ... . So the first 8 Minutes are lost! The times are comming by Clickfinder

    What is to do?
     

    Users who are viewing this thread

    Similar threads

    Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use just to control volume and standby, will no longer put my devices (TV & AVR) to sleep when the HTPC is put in standby. Also when I wake up the HTPC MP closes or crashes (not sure which) as per the example in...
    Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
    Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
    Replies
    0
    Views
    462
    That was the correction I made in BasicHome for the 1.35 Prerelease which you adddd to repo ;)
    That was the correction I made in BasicHome for the 1.35 Prerelease which you adddd to repo ;)
    I'm going bananas here!! Used MP1 since MP1.10 or so.....an haven't had problems for years! Am using latest Dune...
    Replies
    8
    Views
    1K
    MP1 MP2 Odd Standby issue DE
    Since I played around with all the settings as per the previous posts and despite putting everything back to how it was, as far as I can tell, now when my HTPC wakes up to make a recording it no longer does so in away mode. I will probably do a restore from a backup in the hope that that will resolve the issue.:mad:
    Since I played around with all the settings as per the previous posts and despite putting everything back to how it was, as far as...
    Generally standby is working well on My Mp 1.32 x64 pre set up. I just have one issue, which was also present on earlier x86...
    Replies
    35
    Views
    5K
    Result, it works on the two PC's we use for watching TV :D I've not lost anything by the looks of it either, all channels etc still setup. Just my office PC won't connect, which I only use for testing things anyway (I tried updating that this morning as well), but I'll uninstall and install fresh on that. PS. Exported all settings...
    Result, it works on the two PC's we use for watching TV :D I've not lost anything by the looks of it either, all channels etc still...
    I tried to install MP 1.35 this morning, but I couldn't get any further with the installation on the TV server, see error message...
    Replies
    13
    Views
    997
    Thank's, I had already disabled the option in MP. Anyway, last night, after several tests, I suddenly hooked up the correct frequency. Honestly I've done dozens of tests and so I don't know what is the thing that unlocked the problem, but now it works.
    Thank's, I had already disabled the option in MP. Anyway, last night, after several tests, I suddenly hooked up the correct...
    Hello, with Mediaporta and madVR I can't get the right refresh rate of the videos to work. I've set everything needed for the...
    Replies
    2
    Views
    566
    Top Bottom