When you redid the server, did you replace any hardware... or add any new hardware... or in general, did you disturb the hardware configuration at all, even just for cleaning?
I suspected the RAM before but I've since removed this RAM and installed other RAM. I fully tested the RAM I removed and it passed (albeit on another m/board).
Right, so more like a new server than a reinstall.
My advice would be to retest the RAM for a start. I'd use memtest86 for that. In my experience it is quite easy to mess up the seating on some motherboards. If you're lucky, this will be the problem and you'll be back in business quickly.
Otherwise, next step would be testing the CPU. When I built my PC back in ~2006 I'd have used Prime95 and similar for this. I'm not sure what people use these days...
Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall rules were set to Public. I couldn't connect to the new TV Server from my old single-seat installation running 32-bit until I changed all MP-related firewall rules on the new machine to Private. Before I did...
Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall...
Server and client on modern uptodate Windows 11 desktop. Software is Server and Client version x86 1.38.003
Remote client on...
If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24 hours. However...
That is using the "conventional" TV sources, i.e. a DVB-T tuner, a DVB-S tuner, or an analogue tuner. You stated in your other thread that you are using an IPTV source. Perhaps there is a...
If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24...
Is there a limit to recording length? My TVServer recordings all cut off at 3 hours but I can't find a setting anywhere to change...
OK....perhaps impatient of me I know, but went for a full reinstall....and now up and running once more.
Have no idea what was at the root of this problem....still wondering if it may've been due to a Win11 update earlier this week?
OK....perhaps impatient of me I know, but went for a full reinstall....and now up and running once more.
Have no idea what was at...
Have used MP1.38 64 successfully since it's introduction.....now something has changed.
Video folders are still present.....but now...
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV...
Hi everyone,
I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...