Twinhan DVB-C is found as DVB-S (1 Viewer)
- Thread starter pangel
- Start date
can you show me how it looks for a channel? in the channels.conf file?
/bigal
/bigal
- Thread starter
- #23
Hi bigal.
This is a couple of channels:
DR1_43;tdc:578000:C0M64:C:6875:440:441:442:0:440:65024:1100:0
Discov;tdc:474000:C0M64:C:6875:260:261:262:500:260:65024:1010:0
C+;tdc:143000:C0M64:C:6875:2950:2951:2952:500:2950:65024:1020:0
SVT2;tdc:474000:C0M64:C:6875:230:231:232:500:230:65024:1010:0
I know "578000" is the frequency and "6875" is the symbolrate.
But the rest - fx. "Service Id" and "PCR PID" - I'm lost.
/Peter
This is a couple of channels:
DR1_43;tdc:578000:C0M64:C:6875:440:441:442:0:440:65024:1100:0
Discov;tdc:474000:C0M64:C:6875:260:261:262:500:260:65024:1010:0
C+;tdc:143000:C0M64:C:6875:2950:2951:2952:500:2950:65024:1020:0
SVT2;tdc:474000:C0M64:C:6875:230:231:232:500:230:65024:1010:0
I know "578000" is the frequency and "6875" is the symbolrate.
But the rest - fx. "Service Id" and "PCR PID" - I'm lost.
/Peter
SVT2 =)
Freq: 474000
Modulation: 64QAM
C? can stand for cable...
Symbolrate: 6875
230,231,232 could be the 3? subtitles
500 ?
230 again...
Freq: 474000
Modulation: 64QAM
C? can stand for cable...
Symbolrate: 6875
230,231,232 could be the 3? subtitles
500 ?
230 again...
where do you find the channel.conf file?
witch program do you use?
/bigal
witch program do you use?
/bigal
- Thread starter
- #26
The channels.conf file is from "VDR".
DR1_43;tdc:578000:C0M64:C:6875:440:441:442:0:440:65024:1100:0
DR1_43: Name
tdc: Service Provider
578000: Frequency
C0M64: Code rate high priority = 0, Modulation = 64
C: DVB-C
6875: Symbol rate
440: Video Pid
441: Audio Pid
442: Teletext Pid
0: Free To Air (500 = Viacess)
440: Service ID
65024: Network ID
1100: Transport Stream ID
0: Radio ID
So now I have the information. I would just like to see an example of a "working" channel in MP.
/Peter
DR1_43;tdc:578000:C0M64:C:6875:440:441:442:0:440:65024:1100:0
DR1_43: Name
tdc: Service Provider
578000: Frequency
C0M64: Code rate high priority = 0, Modulation = 64
C: DVB-C
6875: Symbol rate
440: Video Pid
441: Audio Pid
442: Teletext Pid
0: Free To Air (500 = Viacess)
440: Service ID
65024: Network ID
1100: Transport Stream ID
0: Radio ID
So now I have the information. I would just like to see an example of a "working" channel in MP.
/Peter
how did you get them? do they work?
/BigAl
/BigAl
Austria
have a look at the website of your provider. there you should find a list of TV-Stations with all informations you need to configure Media Portal by hand.
NO =) i have called them and the do not want to give me that info, i got the network ID and the general Transport Freq. nothing more
My DVB-box to the TV gives me Freq. t o every channel, symbolrate and Modulation
My DVB-box to the TV gives me Freq. t o every channel, symbolrate and Modulation
Users who are viewing this thread
Similar threads
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download page, there was an additional item called "TBS6281se V2 Change Mode Tool". There was zero documentation to accompany this. I downloaded it and ran it. It is a tool to detect the current run state of both...
Actually I solved this myself. I did have the correct driver (it was the only one which would work). But on the drivers download...
My previous TBS PCI-E card failed, so I bought another one. The model I chose is the TBS 6181-SE, which can be seen on Amazon here...
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which I might do if the issue persists.
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
Thank you for pointing out that my analysis may be less than accurate. :eek: :p
Although the change to TV channel 71 may not also have been applied to the independent radio channels (different MUXes), the logs that I prepared for one of the development team does show a difference between channel 704 ("BBC Radio 4") and channel 731...
Thank you for pointing out that my analysis may be less than accurate. :eek: :p
Although the change to TV channel 71 may not also...
I have just discovered that I can no longer receive any of the independent radio channels broadcast on DVB-T in the UK. In...
I did a check of MP 1.36 x64 on Win11 and I can confirm, that the TV server correctly detects running MediaPortal.exe process.
I did a check of MP 1.36 x64 on Win11 and I can confirm, that the TV server correctly detects running MediaPortal.exe process.
Hi,
I am using MP in a client-only setup including DVB-S card for over 10 years now. And regularily scheduling records waking up...
I do have most of my Music tagged with Lyrics and it works with My Lyrics.
If I remember correctly, you have to set: <Don't search songs with Lyrics in Music tag>
I do have most of my Music tagged with Lyrics and it works with My Lyrics.
If I remember correctly, you have to set: <Don't search...
Hi. Setting up MyLyrics now. I got version 2.2.2.295 from My Lyrics 2.2.0 for MP 1.10 Final, and above (31-12-2014) .
I'm planning...
