Twinhan DVB-C is found as DVB-S (1 Viewer)

bigal

Portal Pro
September 18, 2005
159
0
Gothenburg
My provider is ComHem work your magic and get me info about it infinityloop =)

pangel has another...he's danish
 

pangel

Portal Pro
February 5, 2005
52
0
Denmark
My provider is called TDC (Tele Denmark Communications).

I have my information from another program called VDR, where autotuning works...

I have the channel-information, but I am unable to make it work when I input a channel manually. MP just dies and I have to kill it.

Any help is appreciated.

/Peter
 

infinite.loop

Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    Country flag
    pangel said:
    My provider is called TDC (Tele Denmark Communications).
    I have the channel-information, but I am unable to make it work when I input a channel manually. MP just dies and I have to kill it.
    If you want to setup a working HTPC i suggest that you install the 0.1.3.
    the 0.2RC1 is far away from stable. and MyTV wont change much in the next weeks because the developers want to finish the new TS-Engine first before they add it again to the cvs. thats why they use dvr-ms again in the cvs.

    • uninstall 0.2RC1 (or if you have a driveimage restore it)
    • restart
    • install BDA Drivers 1.2.2.0 for your Twinhan (0.1.3 needs this version of the BDA Drivers)
    • restart
    • install 0.1.3
    • launch config
    • skip all steps of the config wizzard
    • launch scoops test tool and clear all logs
    • launch the configuration programm
    • add your TV Card and add a channel
    • launch media portal and try if the channel is working
    • if it is not working please attach the logfiles

    good luck!!!!!!
     

    pangel

    Portal Pro
    February 5, 2005
    52
    0
    Denmark
    infinityloop:
    Thanks for your time.
    I have tried what you told me but when I launch "scoops test tool" I get an error: "Invalid MadiaPortal directory specified: C:\Program Files\Team MediaPortal\MediaPortal".
    I have checked and MP 0.1.3 is installed in this folder.

    Maybe it only works with 0.2RC1?

    /Peter
     

    infinite.loop

    Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    Country flag
    pangel said:
    Maybe it only works with 0.2RC1?
    no. it is working with all versions of media portal.
    your problem can have 3 reasons:
    1. Media Portal is not installed
    2. the registry entry is invalid or missing.
    3. the MediaPortal.xml file is missing

    have you completed the configuration wizzard before you have launched the testtool? that is necessary to create the MediaPortal.xml

    edit:
    :sorry: i have just seen that i had an error in the procedure i have posted before.
    you have to complete the config wizzard befor you launch the testtool :oops:
     

    infinite.loop

    Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    Country flag
    bigal said:
    My provider is ComHem work your magic and get me info about it i
    i had a look at their website. have not found a list.
    i have send them a email. no response until today

    pangel said:
    My provider is called TDC (Tele Denmark Communications).
    it seems that TDC is sharing their frequencies online
    TV->Kable-TV->Kanalnogler
    ::here::
     

    scoop

    Retired Team Member
  • Premium Supporter
  • November 14, 2004
    614
    7
    Country flag
    Hi,
    pangel said:
    @infinityloop:
    I didn't run the configuration wizzard. I will test tonight.
    The test tool verifies the validity of the MediaPortal installation directory by searching for a "MediaPortal.exe" and a "MediaPortal.xml" file in that directory. So, I guess you haven't run either the setup or the setup wizard which creates the configuration file. So, infinityloop is right! ;)

    Could you please verify this and report this back to us?

    Thanks,
    Michel
     

    bigal

    Portal Pro
    September 18, 2005
    159
    0
    Gothenburg
    Are thier not like 8 params you have to enter on each TV-Channel for DVB-C?
    Up to 15 channels one the same Freq. so you have to have several Pids for audio,video,text,EPG?

    I nice tool for getting all info? Anybody how can recommend any software that shows that much info?

    TwinhanDTV givs you Freq,Modulation,Symbolrate,Video Pid,Audio Pid and channel number

    /BigAl
     

    pangel

    Portal Pro
    February 5, 2005
    52
    0
    Denmark
    I did run the "MediaPortal setup wizard" and after that the "Test tool" worked.
    So far so good...

    I tried auto tune with a modifyed "dvbc Symbolrate 6875.dvbc" (danish frequencies) and it didn't find any channels. :(

    I tried to input a channel manual as the DR1_43.jpg shows.
    I didn't fill in the InnerFEC, Modulation, PMT pid, Audio Pid1, Audio Pid1, Audio Pid3 or AC3 Pid, because I didn't know what to write. :oops:

    I started MP and tried to watch the channel and MP didn't "lockup", but I only got a black screen. :(

    Ready for a new suggestion :D

    /Peter
     

    Users who are viewing this thread

    Similar threads

    1.24
    1.24
    Hi all! I'm using MP since nearly 20 years and nearly without great problems. But the last scan of stations was very strange. All...
    Replies
    2
    Views
    644
    Hi, I'm quite new to this forum so please excuse me if I'm short on my understanding on how this works, I've been trying to find a solution for a couple of days but I've been yet unsuccessful. I'm trying to use an old HP Touchsmart (iq500) as a TV screen to live stream my PS2, as I haven't got enough room/money for a new TV. The...
    Hi, I'm quite new to this forum so please excuse me if I'm short on my understanding on how this works, I've been trying to find a...
    Hi, I'm quite new to this forum so please excuse me if I'm short on my understanding on how this works, I've been trying to find a...
    Replies
    0
    Views
    873
    Hi Guys, A long time since I last posted. I have just changed over to MP2 after using MP1 since 2008 and on tuning the Terrestrial TV channels I could only get about half the current number of channels from my transmitter, Winter Hill. So I checked on the forum and found the latest Tuning Parameters .XML file (here), and copied and...
    Hi Guys, A long time since I last posted. I have just changed over to MP2 after using MP1 since 2008 and on tuning the Terrestrial...
    Hi Guys, A long time since I last posted. I have just changed over to MP2 after using MP1 since 2008 and on tuning the Terrestrial...
    Replies
    0
    Views
    386
    OK, this is specifically for people in Belgium (Vlaanderen) who are using Telenet Cable with MediaPortal 2. Next year (Edit: this year, in march 2020) the Telenet provider will stop broadcasting Analog TV and Radio signals on their cable, and make the switch to Digital (DVB-C). The radio signals will disappear completely, so you'll...
    OK, this is specifically for people in Belgium (Vlaanderen) who are using Telenet Cable with MediaPortal 2. Next year (Edit: this...
    OK, this is specifically for people in Belgium (Vlaanderen) who are using Telenet Cable with MediaPortal 2. Next year (Edit: this...
    Replies
    0
    Views
    699
    In lieu of a likely modification to TV Setup module, I have devised my own workaround, using SQL. Here is a quick resume. Should be safe but make sure you have a backup before you try this! Simple scenario to demonstrate. 2 cards both on A/B diseqc switches. In each case A connects to LNB pointed at Satelite 1, and B to Sat 2...
    In lieu of a likely modification to TV Setup module, I have devised my own workaround, using SQL. Here is a quick resume. Should be...
    Started on: 2020-08-25 last update: 2020-08-25 Summary: Add the ability to sort or restrict channels by group in mapping dialog...
    Replies
    4
    Views
    485
    Top Bottom