- October 5, 2012
- 51
- 0
- 42
- Home Country
-
United States of America
when i plug in my pace rng150n stb using firewire to my pc i dont get a new hardware found wizard, what should i do?
using tim moore firestb setup (1 Viewer)
- Thread starter cadams8221218
- Start date
- September 1, 2008
- 21,578
- 8,228
- Home Country
-
New Zealand
Hello
With the greatest respect, my feeling is this forum is totally the wrong place to be asking this question.
The question has basically nothing to do with MP, except that I guess you may want to use MP's TV Server to control the STB.
Keep in mind that few people that use MP use it for STB control.
Even fewer people are likely to have the same STB as you and know the answer to this question.
In other words I'm saying that you're unlikely to get good help here, simply because the people that might be able to help you are not likely to be the same as the people that use this forum.
With that said, I think you should:
1. At least link to the "Tim Moore Firestb" setup guide that you're referring to.
2. Ensure that your STB is supported by the Firestb driver (or whatever it is that understands how to control the STB).
3. Ensure the firewire (IEEE 1394) port is enabled in the STB settings.
4. Ensure that you've installed firewire drivers for your PC's firewire controller.
5. Contact Tim Moore directly or ask your questions on a forum that is directly related to the Firestb driver and/or your STB.
6. Contact your TV provider.
7. Contact Pace.
Good luck!
With the greatest respect, my feeling is this forum is totally the wrong place to be asking this question.
The question has basically nothing to do with MP, except that I guess you may want to use MP's TV Server to control the STB.
Keep in mind that few people that use MP use it for STB control.
Even fewer people are likely to have the same STB as you and know the answer to this question.
In other words I'm saying that you're unlikely to get good help here, simply because the people that might be able to help you are not likely to be the same as the people that use this forum.
With that said, I think you should:
1. At least link to the "Tim Moore Firestb" setup guide that you're referring to.
2. Ensure that your STB is supported by the Firestb driver (or whatever it is that understands how to control the STB).
3. Ensure the firewire (IEEE 1394) port is enabled in the STB settings.
4. Ensure that you've installed firewire drivers for your PC's firewire controller.
5. Contact Tim Moore directly or ask your questions on a forum that is directly related to the Firestb driver and/or your STB.
6. Contact your TV provider.
7. Contact Pace.
Good luck!
Users who are viewing this thread
Similar threads
Thank you both for your good and very detailed advice.
I think I will try to go for the x86 install.
Thank you both for your good and very detailed advice.
I think I will try to go for the x86 install.
Hello great people !
I have an old Win7 setup running the 1.29 build and I'm making a new htpc on Win11.
I have made a backup and...
<MariaDB10>
<URL>https://install.team-mediaportal.com/MariaDB_10</URL>
<FILE>mariadb-10.11.8-winx64.msi</FILE>
<TYPE>Automatic</TYPE>
</MariaDB10>
Maria DB 10.11.8, base version 10.0, in the log file (a piece of which is above) it is displayed - MariaDB 10.11 (x64) - MariaDB 10.0
Property(S)...
<MariaDB10>
<URL>https://install.team-mediaportal.com/MariaDB_10</URL>
<FILE>mariadb-10.11.8-winx64.msi</FILE>...
See the attached screenshot. This problem ocurred when I attempted an update install from MP 1.36 x64, which had previously been...
I'm downsizing my big honkin' HTPC case to a mini PC, which means the tried and true Hauppauge Colossus card that bridges the set top box into Mediaportal needs replaced with a different solution.
I currently have HDMI from the STB to the colossus. Mediaportal is controlling the STB through a USBUIRT blaster and the blaster is...
I'm downsizing my big honkin' HTPC case to a mini PC, which means the tried and true Hauppauge Colossus card that bridges the set...
I'm downsizing my big honkin' HTPC case to a mini PC, which means the tried and true Hauppauge Colossus card that bridges the set...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal.
Maybe helpful for someone in the future. Thanks for the...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...
If you use a VPN connection to your home network, you should be able to use the MP client to connect to your server natively instead of using MPExtended.
If you use a VPN connection to your home network, you should be able to use the MP client to connect to your server natively...
I am another (almost) new user with a problem. About 18 months ago I managed to instal client and server of MP2 on my 32bit PC in...
