Post problems you have when using MediaPortal,
or pre installation questions in here.
They're telling you they DONT like it that way, for them (and me) it isnt nice), and we'd like it the old way.
They're telling you they DONT like it that way, for them (and me) it isnt nice), and we'd like it the old way.
i'm using the EU-MCE remote and since todays/yesterdays SVN there has been a change (obviously)
before i used the "i"button for...
That's not to expensive....but te quality of regular TV is fine.
But you're right... I'm going offtopic.
That's not to expensive....but te quality of regular TV is fine.
But you're right... I'm going offtopic.
I don't get any tv signal. I have do the scan but he don't find a tv signal.
What i'm doing wrong?
Any one nows if this card works with MP???
http://www.pixelmagicsystems.com/products/pdi/pdi_deluxe.htm
Any one nows if this card works with MP???
http://www.pixelmagicsystems.com/products/pdi/pdi_deluxe.htm
Any one nows if this card works with MP???
http://www.pixelmagicsystems.com/products/pdi/pdi_deluxe.htm
Follow this link...
http://forums.nvidia.com/lofiversion/index.php?t12150.html
...to get full support within MediaPortal for Nvidia cards using PureVideo.
I have an Asus 6600 TOPsilencer Nvidia card, 2.0GHz AMD Sempron processor and 2GB RAM and I run 1080p movies using h.264 without any problem. When I playback them in Windows...
Follow this link...
http://forums.nvidia.com/lofiversion/index.php?t12150.html
...to get full support within MediaPortal for...
MyTv dont work long as the H.264 codec is installed in the system..
Remove the codec and everything works fine..
Any one ave...
HD trailers and other h.264 material works like a charm in MediaPortal by following this instructions...
http://forums.nvidia.com/lofiversion/index.php?t12150.html
...using the PureVideo decoder.
If you have an Nvidia card in the 6xxx/7xxx series you will get more or less a flawless playback of h.264 material in even 1080P...
HD trailers and other h.264 material works like a charm in MediaPortal by following this instructions...
In only a few weeks the Soccer World cup will be aired in 720p 50Hz mpeg4 (.h264) HDTV in the swedish DVB-T network.
Wonderful...
Fido i've already intalld the latest version of my drivers and when i tried to instl the pvr of my tv tuner car the software doesen't work....
anyway..i don't want to bored you with my problem...take it easy...i will not use my car in mediaportl
But i have to say u r the best friend and supported i never fuond here....thank you...
Fido i've already intalld the latest version of my drivers and when i tried to instl the pvr of my tv tuner car the software...
Hi everyone,
i have an aopen xcube ea65II with this configuration:
OS: win xp sp2
Processor: Celeron 2,66
Ram: 1,25 gb...
Thanks, Michel. I've gotten used to the way it currently works & I don't really mind it.
One other thing is it only works up to 99. Pressing 200 will go to the 20th channel in the list. Is there a way to get it to go to the 200th?
Thanks for the help.
Thanks, Michel. I've gotten used to the way it currently works & I don't really mind it.
One other thing is it only works up to...
I'm using an MCE remote with a PVR150MCE & the MyBlaster plugin controlling a sat receiver. In the guide, selecting a channel...
I just installed girder (and the mp plugin) and started it...and it was less than obvious how it works. Does someone have a howto on how to configure this stuff...?
Or you can just write a few short lines right here on what to think of ;)
...or I'll stop being lazy and try it myself...all is fine by me :P
Thanks a bunch...
I just installed girder (and the mp plugin) and started it...and it was less than obvious how it works. Does someone have a howto...
Hey,
I got a Leadtek TV2000 XP Deluxe card that I want to use with media portal...but I have no idea how to configure this.
The...
Hi, I am using the logitech diNovo mediapad as a remote for Mediaportal. But when upgrading from RC3 to RC4 the "back-key" on the diNovo mediapad stoped working in Mediaportal? What changed?
Hi, I am using the logitech diNovo mediapad as a remote for Mediaportal. But when upgrading from RC3 to RC4 the "back-key" on the...
Hi, I am using the logitech diNovo mediapad as a remote for Mediaportal. But when upgrading from RC3 to RC4 the "back-key" on the...
Just added a hauppauge nova-t card to my MP computer and got at simular problem. Autodetection of channels finds all my channels all right, but one channel (danish TV2) sets the AC3 Pid in the dvb-t setting to a value. It causes the picture with no sound when the channel is selected, manually changing the value to 0, gets the sound...
Just added a hauppauge nova-t card to my MP computer and got at simular problem. Autodetection of channels finds all my channels...
Hello,
Since the Mediaportal 0.2RC3 and 0.2RC4 i ve got the message "No Signal" on some dvbt channel. This is due to Audio and...
Cool! Thanx! I'll give that a try :)
Cool! Thanx! I'll give that a try :)
How do you switch between tuner one and two in my tv? I have a pvr 500mce. Also how do you record on one tuner and watch on the...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-05-28 )
MediaPortal Skin: Razor
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPA Decoder Filter
Video Codec: DScaler Mpeg2 Video Decoder
CPU Type: Intel Pentium 4 - 3.00GHz
Memory: 1 GB...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-05-28 )
MediaPortal Skin: Razor
Windows Version: Windows XP...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-05-28 )
MediaPortal Skin: Razor
Windows Version: Windows XP...
mpod: if you look what has been part of the standard installation of 0.2 RC1 and 0.2 RC4 then there is a large difference. Just go the plugins settings.
Maybe the core dev's take only care for the core MP. But a lot of other stuff that influences MP and it's stability has the found the way to the standard delivery. Everybody...
mpod: if you look what has been part of the standard installation of 0.2 RC1 and 0.2 RC4 then there is a large difference. Just go...
Though I am rarely here, I am really having on eye on mediaportal. It is quickly growing and it recieves features every couple of...
Area: Media Portal Plugins
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: InterVideo NonCSS Audio Decoder for Hauppauge
Video Codec: InterVideo NonCSS Video Decoder for Hauppauge
CPU Type: AMD...
Area: Media Portal Plugins
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
Area: Media Portal Plugins
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
Could deleting some interfering codecs solve this problem? If so, which ones and how?
Any help or advice about surrond sound will be much appeciated!
Could deleting some interfering codecs solve this problem? If so, which ones and how?
Any help or advice about surrond sound...
Hi, I'm using ac3 filters expanded stereo to make use of my rear speakers with the latest version of mediaportal. This works ok...
When i try to run the MediaPortal Support Wizard it doesn't work. On step 2 I receive an error with a window popping up starting with "The application attempted to perform an operation not allowed by the security policy. The operation required the SecurityException....."
When i try to run the MediaPortal Support Wizard it doesn't work. On step 2 I receive an error with a window popping up starting...
Current SVN claims that the software works on Avermedia Hybrid Cardbus (E506R). However, when trying to tune channels for the...
If we skip the "wich one to use" and concentrate on Wich one takes precidence? tv option or the other?
PS:Thanks for the link.Will read it tonite:DS
//Lasse
If we skip the "wich one to use" and concentrate on Wich one takes precidence? tv option or the other?
PS:Thanks for the...
Hi
There is a deinterlace setting under the tv and one under the Decoder Filters, Windvd7 deco..
Wich one takes precidence. Do...
yeah i noticed that
if you go into the remote settings
you can increase the delay
i have mine set at 500ms but im going to try higher.
yeah i noticed that
if you go into the remote settings
you can increase the delay
i have mine set at 500ms but im going to...
Drowhunters Media Portal XBMC sytle Direct Input Config v0.2
============================================================
May 28...
Card Support
Got the new compro dvb-t drivers digital 1.3.3.9 working OK, even got the analog side to at least enable configurator to tune analog stations ok, getting them to work under MP live is another matter.
Re the digital drivers, may I be forgiven for the dastardly act of reading the documentation, it is the worst sin for...
Card Support
Got the new compro dvb-t drivers digital 1.3.3.9 working OK, even got the analog side to at least enable configurator...
The latest version (1.3.3.9 of Compro DVB-T (Videomate) hybrid drivers are not recognised by mediaportal. The previous version...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-23.05.2006- 1:01:15,16
(2006-05-23)
MediaPortal Skin: mce
Windows Version: Windows XP (Szervizcsomag 2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: NVIDIA Audio Decoder
Video Codec: NVIDIA Video Decoder
CPU Type: Intel Pentium...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-23.05.2006- 1:01:15,16
(2006-05-23)
MediaPortal Skin: mce...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-23.05.2006- 1:01:15,16
(2006-05-23)
MediaPortal Skin: mce...
Hi,
please use our Support Template / Tool.
Also post your logs into PasteBin.
Do you have installed Elecard?
Flip.
Hi,
please use our Support Template / Tool.
Also post your logs into PasteBin.
Do you have installed Elecard?
Flip.
I've a winfast tv2000 xp deluxe card. The scan worked. But I've a black sceen when i see the tv.
Why ?
My video codec is leadteck...
ok...I'll go that route. But I'll get that info anyway since I'm sure I'm not the only person in the world that may want to use external inputs on a Fusion card...(well....at least I'd hope I'm not anyway :P )
ok...I'll go that route. But I'll get that info anyway since I'm sure I'm not the only person in the world that may want to use...
Hi, I was curious as to if anyone else has attempted to use the external inputs on a Fusion 5 card. The setup I have now is with...
send me one to
hey could you send me a copy of that capturedefenitions.xml
Cuz my asus p7131 dual does'nt work either
my mail are kreller@krellers.dk
send me one to
hey could you send me a copy of that capturedefenitions.xml
Cuz my asus p7131 dual does'nt work either
my mail...
Area: Media Portal Program
MediaPortal Version: 0.1.3.0 (2005-07-16)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
Area: DVB-S Tuning
MediaPortal Version: 0.2.0.0 (2006-03-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: AMD Athlon XP 3000+
Memory: 511 MB
Motherboard: MS-6570E...
Area: DVB-S Tuning
MediaPortal Version: 0.2.0.0 (2006-03-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET...
Area: DVB-S Tuning
MediaPortal Version: 0.2.0.0 (2006-03-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET...
Hello my fellow Media Portal users!
Since about one week ago i started using Media Portal 0.2 RC4 for my HTPC. It al works quite well although i have one mayor problem.
When watching TV by media portal the sound is one or two seconds to early to match what is happening on the screen. This is becoming quite irritating, and i tried...
Hello my fellow Media Portal users!
Since about one week ago i started using Media Portal 0.2 RC4 for my HTPC. It al works quite...
Hello my fellow Media Portal users!
Since about one week ago i started using Media Portal 0.2 RC4 for my HTPC. It al works quite...
Just take a look at FAQ in the Wiki:
http://wiki.team-mediaportal.com/FrequentlyAskedQuestions
Regards
Ralph
Just take a look at FAQ in the Wiki:
http://wiki.team-mediaportal.com/FrequentlyAskedQuestions
Regards
Ralph
Hi,
A really silly, stupid question but I have to ask since I´m probably blind and not just stupid..
Where can I change dir...
Everybody who is looking for this, too,
take a look at FAQ in the Wiki:
http://wiki.team-mediaportal.com/FrequentlyAskedQuestions
Regards
Ralph
Everybody who is looking for this, too,
take a look at FAQ in the Wiki...
Hi,
I just started using MP and think its great, nice work!
I would just like to know, when i hit record in MyTV, where it...
Got this resolved with this MS Patch
Hi,
I stepped over this post and the Patch listed below solved my problem
https://forum.team-mediaportal.com/viewtopic.php?t=8146
Even though I have just one DVB and one analog card in my PC this patch seems to be necessary. It updates the psisdecd.dll which caused the crash.
3th : DVB...
Got this resolved with this MS Patch
Hi,
I stepped over this post and the Patch listed below solved my problem...
Hello,
I am trying to get my Technotrend C-1500 DVB-C card to work. When I start "configuration.exe", switch to "Capture Cards"...
A lot less taxing than recording two different channels at the same time and MP can do that quite easily.
Plus the added benefit of doing exctly what you want it to ;-)
A lot less taxing than recording two different channels at the same time and MP can do that quite easily.
Plus the added benefit...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Hi,
I am desperately wanting a dual DVB system, and am having possible problems with signal strength, so I really want to only have one aerial on my HTPC. Hence the need for only a single card.
I don't like the idea of the Dvico Fusion, which is effectively one PCI and one USB tuner on a card, and it is pretty expensive in the...
Hi,
I am desperately wanting a dual DVB system, and am having possible problems with signal strength, so I really want to only...
Hi,
I am desperately wanting a dual DVB system, and am having possible problems with signal strength, so I really want to only...