Post problems you have when using MediaPortal,
or pre installation questions in here.
Also check the downloads section there are MCE remote drivers there as well.
Also check the downloads section there are MCE remote drivers there as well.
Hi,
I'm new to Media Portal and am having trouble with the IR Blaster configuration.
I am running a Hauppauge PVR-150 MCE Kit...
Thanks I will give it a try :D
Thanks I will give it a try :D
When I run a DVD some of them run small in size, not full screen or widescreen, when they play in my DVD player they are fine. Will...
Some infos concerning quartz.dll :
https://forum.team-mediaportal.com/viewtopic.php?p=95383#95383
Some infos concerning quartz.dll :
https://forum.team-mediaportal.com/viewtopic.php?p=95383#95383
Play some media and the quartz.dll crashes the whole MP.
Anything i can do to stop this ?>
Also where do i get my system...
Okay....
Thx for info.
Got MAME to work yesterday with DOS version of MAME.....MAME32 did not work.
I'll try the setup with the file launcher-
But i still have 2 issues..........
1:
When i load MAME games i get an error:
"unable to detect keyboard device error 32".
It launches the game, but I have a 4 second...
Okay....
Thx for info.
Got MAME to work yesterday with DOS version of MAME.....MAME32 did not work.
I'll try the setup...
Hi gamer-guys(and girls).
Please help me out here, with some issues.
I want ALL my games(NES, SNES, MAME, PSX) to work in...
Fixed in SVN.
Fixed in SVN.
hi everyone,
I'm sure I've already seen someone already asking for this but I can't find the original thread anymore. So please...
resorted to 0.1.0.3 and things are good
resorted to 0.1.0.3 and things are good
followed the rules ... please see below
Hello, just wanted to remind: a solution is still open and the behaviour is the same with a current SVN.
I can manage to "activate" the second (hotbird LNB) with the help of Twinhan's THTSCapture tool for the BDA driver (can be fond on http://www.twinhan.com/download_driver&software.asp under "utilities" "Capture Tool2". When I try...
Hello, just wanted to remind: a solution is still open and the behaviour is the same with a current SVN.
I can manage to...
Area: Media Portal Program MP Version: 0.2.0 RC2 with mediaportal-cvs-02-19-2006--01-06.rar
Skin: MCE
Windows Version: XP SP2...
I have the same problem here.
Joce
I have the same problem here.
Joce
MP version: 0.2 RC4
I have around 50 DVB radio channels.
I can move them up and down in "Setup MediaPortal" -> "Radio" ->...
NO STINK'in kidding. Funniest thing I heard of in awhile!
NO STINK'in kidding. Funniest thing I heard of in awhile!
mPod posted this in another thread if this is so has anyone recompiled it and if not how do you?
Anyone knows if the thermaltake medialab remote is supported in MP ?
http://www.thermaltake.com/product/Chassis/desktop/mozart/vc4001sns.asp
JVB
Anyone knows if the thermaltake medialab remote is supported in MP ...
Anyone knows if the thermaltake medialab remote is supported in MP ...
Disable the grab EPG from DVB in the configuration of the program guide. On hybrid tuners this feature lock the tuner in digital mode to grab EPG data, so analog channels cannot be seen (until it's disabled, of course).
Disable the grab EPG from DVB in the configuration of the program guide. On hybrid tuners this feature lock the tuner in digital...
Hi everybody.
I've a problem with an hauppauge hybrid card, hvr-1300.
I've configure both the digital and the analogue card...
Re: mce remote in RC4 dont work
Use an SVN build (latest is preferable) and it will work again.
Re: mce remote in RC4 dont work
Use an SVN build (latest is preferable) and it will work again.
Thus worked fine in RC3 - in RC4 the arrow buttons and dvd control buttons work fine but colour buttons,back button,vol button and...
Yeah, thought about it..
But: My boss and I do have the same gfx card but from different vendors.. but same chipset and both passive, but we different mainboards..
Both cards freeze on his mainboard, no matter if it is installed on my or his computer case..
On my board both cards run fine...
We picked that card because...
Yeah, thought about it..
But: My boss and I do have the same gfx card but from different vendors.. but same chipset and both...
I ran MP on a board with VIA chipset and with an FX5200 (passive cooled)
I have often freezes. It seems Directx is freezing as...
Ok scoop sorry , thought error.log is enough.
Ok scoop sorry , thought error.log is enough.
Hi there , today i checked MP logs expecially the error.log.
Someone could explain me what that means :
31/05/2006 06:45:34...
Hi,
i have the same problem. I bought the cinergy 600 a few days ago because i read that it is supported by mediaportal. Also it was important to me that the card is supported by dscaler.
The card works fine with dscaler.. but not with mediaportal versions after 0.2 rc2.
I saw to late the text on...
Hi,
i have the same problem. I bought the cinergy 600 a few days ago because i read that it is supported by mediaportal. Also it...
Hi y'all,
Thank you for making such a fine product!
I used to run MediaPortal 0.2 RC2 which supported my terratec cinergy 600...
ffdshow - it works
Last night i installed ffdshow, and now tv works in 6 channel sound :-)
ffdshow - it works
Last night i installed ffdshow, and now tv works in 6 channel sound :-)
Hi folks,
For a long time I've been using stereo out from my Audigy2 card into a dolby pro logic receiver. I took the time...
Thanks to all... I rolled back to 28-05-06 and I am away!! all good now...
Thanks Helmut... I will update the plugin tonight...
Thanks again guytpetj and mPod...
Thanks to all... I rolled back to 28-05-06 and I am away!! all good now...
Thanks Helmut... I will update the plugin tonight...
Hi there,
this is my first post... I have recently built my HTPC. I decided to go with MP. Everything works great, with the...
I think your problem is slightly different from mine - I finally got a reply from a Hauppauge guy a few days ago, and he informed me that the drivers I had installed (he was assuming I'd installed the MCE versions) weren't compatible with my XP setup. I actually got error messages (not surprisingly) when trying the MCE drivers and...
I think your problem is slightly different from mine - I finally got a reply from a Hauppauge guy a few days ago, and he informed...
I apologise as this is a Windows problem really, but having scoured the forum for the last two days, the level of knowledge...
dont know that, but i was able to correct the problem with the aspect ratio with using inter video decoder. Since i got a small processor, i am using MP to stretch the Picture and using FFDshow to give me more color.
Does anyone know of good settings for bringing analog tv to live ? At the moment i have pale colors and bad...
dont know that, but i was able to correct the problem with the aspect ratio with using inter video decoder. Since i got a small...
Hello
Im using FireDTV together with MP's MyTV and it works kindof nice - except for the image quality. I would like to get more...
If the cards have two co-axial connectors on them, the second connector is the "aerial pass-through" and can be used to connect to the second card's "aerial in".
If the cards only have a single co-axial connector, then you would need to use a "2-way splitter" on the end of your aerial lead, with a lead then to each of the aerial...
If the cards have two co-axial connectors on them, the second connector is the "aerial pass-through" and can be used to connect to...
Hi everyone, i have recently paid out for a second fusion hdtv dvb-t plus tuner card (both identical)so i can record one channel...
I have such a remote. And want to set it up.
I've loaded the niveus driver selected x10 driver other. But keys dont match.
what should I do to make this work? willing to provide info so we can get native support.
Does anyone have a xml config file for this remote? I saw a thread about the marmitech remote which is quite...
I have such a remote. And want to set it up.
I've loaded the niveus driver selected x10 driver other. But keys dont match...
I have such a remote. And want to set it up.
I've loaded the niveus driver selected x10 driver other. But keys dont match...
Hi,
https://forum.team-mediaportal.com/viewtopic.php?t=15644
ffdshow postprocessing is a science.
You may want to read through these pages:
http://www.avsforum.com/avs-vb/showthread.php?t=246752 (only 137 :)).
Flip.
Hi,
https://forum.team-mediaportal.com/viewtopic.php?t=15644
ffdshow postprocessing is a science.
You may want to read...
Ive got a HD TV capable of 720p and 1080i so might as well take advantage of it.
Ive got FFDSHOW installed. It has a resize...
Yes you can, but I am finding some problems with it.
For some stuff, particularly TV shows, when you run the search it will override old manually edited entries, or create double entries for some items. It also misses some completely (in one instance, the last season of the Sopranos.)
MCE handles this much better, since it can...
Yes you can, but I am finding some problems with it.
For some stuff, particularly TV shows, when you run the search it will...
My videos are located on two seperate hard drives. And i was wondering if there was a way that i could display them all as one...
could be that too
could be that too
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Area: Media Portal
MP Version: 0.2 RC4
Windows Version: Windows XP SP2, all latest patches
CPU Type: AMD Athlon64 3200+
Memory: 1GB Crucial DDR3200
Motherboard Chipset: Shuttle FN95V2
Video Card: ATI Radeon 9600XT 256MB
TV Card: Compro Videomate DVB-T300 hybrid analogue/digital
Shuttle SN95G5V2, Seagate Barracuda 7200 200GB...
Area: Media Portal
MP Version: 0.2 RC4
Windows Version: Windows XP SP2, all latest patches
CPU Type: AMD Athlon64 3200+
Memory...
Area: Media Portal
MP Version: 0.2 RC4
Windows Version: Windows XP SP2, all latest patches
CPU Type: AMD Athlon64 3200+
Memory...
Okay, so that would explain why I can't get any analgue channels at the moment - I've installed 0.2 RC4.
I'll check out that link as soon as I can.
I only get some digital channels in my area, so I'll need to rely on analogue for some channels (although I know a hybrid card is not the same as a dual tuner card).
I have an AMD...
Okay, so that would explain why I can't get any analgue channels at the moment - I've installed 0.2 RC4.
I'll check out that link...
Hi,
I have a Compro DVB-T TV card, which can be used to watch analogue or digital TV.
Can Media Portal scan both signals and...
you can make it look a bit better (have 2-3 spaces from bottom to wrap to top) but I agree there should be a way to STOP rolling menus
you can make it look a bit better (have 2-3 spaces from bottom to wrap to top) but I agree there should be a way to STOP rolling menus
Area: Media Portal Plugins
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
Thanks!
Thanks!
This might just be something with my configuration, but I have the MCE remote control and the "DVD Menu" button is used (by...
If I leave MP on after setting up a new recording, it will change channel on my STB just fine. But after it resumes from standby, the recording starts but MP will only change channel on my STB intermittently. This used to work perfectly before RC4. Is there anyone with the same problem?
I'm currently using MP RC4 and an MCE remote...
If I leave MP on after setting up a new recording, it will change channel on my STB just fine. But after it resumes from standby...
If I leave MP on after setting up a new recording, it will change channel on my STB just fine. But after it resumes from standby...
I read my comic books with xbmc and its a joy. Want that same experience in media portal
I read my comic books with xbmc and its a joy. Want that same experience in media portal
I noticed that when in my pictures the zoom isnt smooth
and that movement with the arrow keys are choppy
on XBMC the same...