Still nothing. I also get a detection related problem, as seen in the logs. Keep you updated, will keep an eye on your threat too...
Cheers
Still nothing. I also get a detection related problem, as seen in the logs. Keep you updated, will keep an eye on your threat...
Found this via Armandp's post, and think it deserves some attention
Creds to Geert-Jan for this!
IR Server Suite to resolve...
Because as far as I could see disable MCE didn't work. Perhaps I needed to restart the computer at some point and didn't.
Because as far as I could see disable MCE didn't work. Perhaps I needed to restart the computer at some point and didn't.
when i press Pause, it will super fast Pause, and then resume play
its like pressing 2 times super fast.
i can also hear the click...
mpi version of the plugin
Nope. Latest is in SVN and it's called MiniDisplay.
Simone
mpi version of the plugin
Nope. Latest is in SVN and it's called MiniDisplay.
Simone
Hi All
The Imon software is driving me nuts. It doesnt work with the tv power button on my MCE remote and a few other buttons...
The Input Service still stops running.
https://forum.team-mediaportal.com/mce-replacement-plugin-165/input-service-not-started-38529/
I went into MSConfig and disabled the Media Center Services as suggested in this thread. I have my fingers crossed.
The Input Service still stops running...
hi ppl..
evry time i get out from the the MP i have to re-start the input service from the start buton in the input servic...
I just installed the latest version of IR Server Suite on Windows Server 2003, my RC6 Microsoft MCE remote seems to be working as some of the keys work, but not all of them, and the "disable automatic buttons" is grayed out ???
Any idea why?
***update***
I was able to get this remote working using intelliremote. The developer...
I just installed the latest version of IR Server Suite on Windows Server 2003, my RC6 Microsoft MCE remote seems to be working as...
I just installed the latest version of IR Server Suite on Windows Server 2003, my RC6 Microsoft MCE remote seems to be working as...
Hi megacrypto, are you still using your Dreambox with MediaPortal? I'm asking because recently I figured out a good way to control the box, look here https://forum.team-mediaportal.com/mce-replacement-plugin-165/dreambox-users-good-news-47447/
Hi megacrypto, are you still using your Dreambox with MediaPortal? I'm asking because recently I figured out a good way to control...
Im trying to setup one of the emitters to control my dreambox DM600 but for some reason they codes are not working. I already added...
I guess that could be all it was, nothing else made sense. The last thing I did was remove all the IR software, re-install the default MS MCE drivers. Rebooted and keybaord worked. I then installed the IR suite, checked all config settings in MP and rebooted in frustration when it still didn't work. Was about to give up when after the...
I guess that could be all it was, nothing else made sense. The last thing I did was remove all the IR software, re-install the...
I have been through the threads here and find that many people have the same problem as this. I have this problem every time I...
okay thanks for your imput :)
okay thanks for your imput :)
Mann im getting tired of WMC messing whit my MP, when i use the remote.. :(
i have the IR server suite installed.
and thats...
I had to remove the 'Microsoft MCE' remote and then add the 'Microsoft MCE (Full)' remote.
In the configuration of the MP plugin part of the IRserver suite, to remove the 'Microsoft MCE' remote I pressed the 'clear all' button. This does nothing to the mappings as the pop-up help mentions, it removes all selected remotes. Then with...
I had to remove the 'Microsoft MCE' remote and then add the 'Microsoft MCE (Full)' remote.
In the configuration of the MP plugin...
I have IRserver (almost) working on RC3. That is to say al keys work, including some re-mapped to blast to the amplifier (volume...
everything runs fine on every os ive tried....that would be
xp/xp mce (remote working)
2003/ 2003x64(which includes xpx64 since its the same kernel....)
Server 2008 x64 (remote working)
everything runs fine on every os ive tried....that would be
xp/xp mce (remote working)
2003/ 2003x64(which includes xpx64 since...
Sry to open an extra Topic for this,
but i couldnt find an answer to my question.
I read that the replacement driver wasnt...
dareh is right, those are only for receiving... shame :(
dareh is right, those are only for receiving... shame :(
Has anyone managed to blast command to the panasonic plasma tv to turn it on?
I tried learning ir command but no luck, the problem...
1.0.4.1 did not help. In fact, even after uninstalling 1.0.4.1, the machine still would not boot. Finally, I reinstalled 1.4.2 over 1.0.4.1, uninstalled 1.4.2, my eHome driver and I could boot again.
I'm afraid I have to give up on IR-Suite, which is very unfortunate as I think it suits my setup perfectly. Unfortunately, giving...
1.0.4.1 did not help. In fact, even after uninstalling 1.0.4.1, the machine still would not boot. Finally, I reinstalled 1.4.2...
IRSS 1.4.2 RC1 installed onto a Vista Home Premium 64 machine caused it to stop booting. Hangs at black screen with moveable white...
Hauppauge support in TV Server RC3
Hi,
I used MP with MyTV 2 plugin and hauppauge ir blaster plugin before RC1, but since RC1 I switched to Tv server, and unfortunately I cannot use ir blaster anylonger
Can I use IR Server suite now with my hauppauge ir blaser (from HVR 1300) and TV server?
Also, recently my cable provider...
Hauppauge support in TV Server RC3
Hi,
I used MP with MyTV 2 plugin and hauppauge ir blaster plugin before RC1, but since RC1 I...
Hi,
Does this plug in for MP supports the Hauppauge IR Blaster. If it is, can you explain how to configure it to change channels...
Apparently to go back you have to use "Close dialog"
So i got it working..
Apparently to go back you have to use "Close dialog"
So i got it working..
im wonder why there is no back, option in the mc remote plugin.
like EXIT and Revind, and Back, all this bottons i normaly have set...
Hi,
I'm trying to configure IR Server Suite to work with GB-PVR and my MCE remote. I'm trying to setup the STB remote codes. But when I go into Learn IR Commands and click on NEW and then put in '1' I don't have a port to choose, it just has None. Any ideas?
Hi,
I'm trying to configure IR Server Suite to work with GB-PVR and my MCE remote. I'm trying to setup the STB remote codes. But...
Hi,
I'm trying to configure IR Server Suite to work with GB-PVR and my MCE remote. I'm trying to setup the STB remote codes. But...
I have the same issue. Does anyone know what to do?
I have the same issue. Does anyone know what to do?
Hello all,
I had 1.0.4.1 working perfectly with VMC compatible Pinnacle IR receiver / remote. Then I had to reinstall Vista as...
I haven't played with it, but there is the IRBlast.exe in the program flders. Could use this with the windows task scheduler.
Looks like it blasts an .IR file, but I don't know how you make one.
I could do with knowing how to run a Translator Macro from an exe or shortcut...
I haven't played with it, but there is the IRBlast.exe in the program flders. Could use this with the windows task scheduler...
HI Guys
Is there any way to run a macro at a specific time of the day.
I'm looking to automatic turn on and off a screen...
Good morning, ive been searching the web high and low for a WinXP 64bit remote drivers for a Dell MCE controller (HVR-1200 controller and USB signal receiver).
and-81 signature specifically mentions that the driver is now obsolete and non functioning, however is their any other alternative? Ive tried installed the obsolete version...
Good morning, ive been searching the web high and low for a WinXP 64bit remote drivers for a Dell MCE controller (HVR-1200...
Good morning, ive been searching the web high and low for a WinXP 64bit remote drivers for a Dell MCE controller (HVR-1200...
First of all i like to thank you for the great work on the IRServer suite.
Unfortunately I think I found a bug.
I am building some macros to use for sending blaster signals to my tv and amplifier.
I want to use the pause command because otherwise the steps in the macro are too fast.
When I test the macro I get the following...
First of all i like to thank you for the great work on the IRServer suite.
Unfortunately I think I found a bug.
I am building...
First of all i like to thank you for the great work on the IRServer suite.
Unfortunately I think I found a bug.
I am building...
Hi,
I've had the quickest of quick looks, and can't see anything.
Is it possible to do something based on a registry value? Ideally a macro runs on an event, checks a particular registry entry and conditionally excutes based on the returned value?
Hi,
I've had the quickest of quick looks, and can't see anything.
Is it possible to do something based on a registry value...
Hi,
I've had the quickest of quick looks, and can't see anything.
Is it possible to do something based on a registry value...
Hi,
I love the plugin and the IR suite and it becomes better and better every time.
I have two bugs, perhaps I can help to squash them
1: the standby bug. When IR service is running the pc wont enter standby mode S3. When stopped it does
2: with repeated presses of the remote only the first 3-4 are handled by the IR suite...
Hi,
I love the plugin and the IR suite and it becomes better and better every time.
I have two bugs, perhaps I can help to...
Hi,
I love the plugin and the IR suite and it becomes better and better every time.
I have two bugs, perhaps I can help to...
I have, unfortunately, been encountering the opposite problem. Using IRSS 1.0.4.2 RC1 I was able to get channels changing using the TV3 plugin and the TV-Server for TV except using the TV-Server I am having to add all of my channels manually then map the channel to a card, then map the channel to the Guide (using xmltv plugin for...
I have, unfortunately, been encountering the opposite problem. Using IRSS 1.0.4.2 RC1 I was able to get channels changing using the...
OK I have to be doing something wrong in my setup. I cannot get IR to change the channel while in MP
Setup:
MP RC 2 w/ TV...
How would one use IR Server Suite's Translator to control an unfocused application window?
I am using an MCE IR receiver with a Harmony remote. The translator recognizes the IR commands fine.
I am setting up button mapping for J River Media Center and have chosen to send window message to MJFRAME window class. The details are as...
How would one use IR Server Suite's Translator to control an unfocused application window?
I am using an MCE IR receiver with a...
How would one use IR Server Suite's Translator to control an unfocused application window?
I am using an MCE IR receiver with a...
Spragleknas,
I'm with you... we are ALL busy. I work 2 projects, painting my house, putting in new carpet, getting married next month, and interviewing for 2 different jobs in my company. And I can still take 10 minutes to answer posts/emails some a plug-in I wrote for Homeseer but stopped developing 6 years ago. I even respond in a...
Spragleknas,
I'm with you... we are ALL busy. I work 2 projects, painting my house, putting in new carpet, getting married next...
I've seen many posts (and posted a few times myself) over the past 2 months and have seen no support at all from the developer and...
my setup...
USB-UIRT
XBMC
XP SP3 + all patches
Harmony remote programmed as XBOX & MCE
IRSS installed & seems to be running fine.
Debug is showing all commands sent to it from the remote but nothing seems to be getting to XBMC?
thx for the help!
my setup...
USB-UIRT
XBMC
XP SP3 + all patches
Harmony remote programmed as XBOX & MCE
IRSS installed & seems to be...
my setup...
USB-UIRT
XBMC
XP SP3 + all patches
Harmony remote programmed as XBOX & MCE
IRSS installed & seems to be...
Hi,
I have Lintronic TT455-RT-238 Universal Signal Converter that reads the signal from my Bang & Olufsen remote and via a serial-to-usb cable from the RT-238 inputs the signal into the USB port of my pc. On my pc i see the cable as a COM3, but i cant figure out howto read the signal. I tried with winlirc, but it just says that the...
Hi,
I have Lintronic TT455-RT-238 Universal Signal Converter that reads the signal from my Bang & Olufsen remote and via a...
Hi,
I have Lintronic TT455-RT-238 Universal Signal Converter that reads the signal from my Bang & Olufsen remote and via a...
ok, i got it solved after some more detailed testing today. I removed intelliremote and reinstalled ehome transciever driver + started hid again. nothing worked in mediaportal with replacement plugin so I had to use other remote and map all the codes to their keys and everything now works great, even macro :) no more judder finally...
ok, i got it solved after some more detailed testing today. I removed intelliremote and reinstalled ehome transciever driver +...
Hi all, I have quite a few problems all of the sudden with my mce remote. I had this combination:
standard mce remote driver for...
been trying for 3 weeks to get this to work
have one pc that works fine
but this other pc (better spec) runs mp and ir suite
but refuse to change channel
all it ever comes back with is listed below
what the hell is going on
2008-08-29 21:43:22.953125 [ERROR][ProcessExternalChannel]: Exception ystem.NullReferenceException...
been trying for 3 weeks to get this to work
have one pc that works fine
but this other pc (better spec) runs mp and ir suite
but...
been trying for 3 weeks to get this to work
have one pc that works fine
but this other pc (better spec) runs mp and ir suite
but...
I finally got it to work. Here is what I done:
- Uninstalled everything
- reinstalled MP + latest SVN
- installed the MCE Replacement Plugin
- unchecked any remote from the remotes tab
- in the MCE Replacement Plugin config screen:
- under Options I ticked Extended Login & Enable MCE Remote
- under IR Commands I added the codes...
I finally got it to work. Here is what I done:
- Uninstalled everything
- reinstalled MP + latest SVN
- installed the MCE...
I just got my MCE Remote (Model: 1039) and i was trying to set it up in MP. I also want to use the 2 IR emitters that come with it...
I added my TV remote in the Multi-Mapping tab, and using my MCE remote, when i press Start it toggles between the remotes. I get the TV menu alright, but when i try to navigate, the movement goes in the mediaportal and not to the blaster, i.e. the menu of mp moves up / down and not the menu of my TV?!
My question is, which codes do...
I added my TV remote in the Multi-Mapping tab, and using my MCE remote, when i press Start it toggles between the remotes. I get...
I added my TV remote in the Multi-Mapping tab, and using my MCE remote, when i press Start it toggles between the remotes. I get...