I have searched for hours and am pulling my hair out.
I have tried many times to figure out how to install and get these plugins working
MY comptuer has a PVR-150 that i have got my Skydecoder connected to it. I am using MCE remote
I take it I install IR Server suite 1.0.4.0, then i need to stop Input service then install MCE...
I have searched for hours and am pulling my hair out.
I have tried many times to figure out how to install and get these plugins...
I have searched for hours and am pulling my hair out.
I have tried many times to figure out how to install and get these plugins...
Hello all
The problem fixed:
1. completely remove ALL mediaportal from the system
2. Install MP 1.0 with last IR server suite
3. Upgrade to MP 1.0.1
And the blasting works!
Hello all
The problem fixed:
1. completely remove ALL mediaportal from the system
2. Install MP 1.0 with last IR server suite
3...
Hello
I installed Mediaportal 1.0.1 with IR Server suite 1.4.2.2627.
I configured the TV2 plugin to work with my STB, and all...
well sorry for the late reply...
I am not too sure if the IRSS has made this modificaiton by now...
i have been using a modified dll which just use a different IDs for Pinnacle remote.. so if you are also using "Pinnacle MCE Remote kit" with the XP ehome driver, probabily you can also use this to replace the original <install...
well sorry for the late reply...
I am not too sure if the IRSS has made this modificaiton by now...
i have been using a...
I was happy to see that Mediaportal is expected to be able to utilize my SMK IR transceiver through this plugin. I only get...
tallrussian,
Did you have to do anything special to get IR Server working with your Yamaha receiver? It learns and blasts IR commands fine with my Philips LCD TV, but it is very erratic with my Yamaha Receiver (RX-V663). It looks like it learns the commands fine, but only about 1 in every 10 or 20 tests actually works. All I am...
tallrussian,
Did you have to do anything special to get IR Server working with your Yamaha receiver? It learns and blasts IR...
Hi,
First I wanted to say, "Thank you" for the wonderful plug-in. It appears to be everything that I wanted for my control...
I am using the latest beta of IRSS and would like to send a command to an unfocused window. I have an MCE remote and in IR Translator I have tried to capture basic keys (like up, down arrow keys, enter, numbers etc) but Translator is not able to capture them.
It can capture other commands like Play, Pause, Info, Exit etc. I'd like...
I am using the latest beta of IRSS and would like to send a command to an unfocused window. I have an MCE remote and in IR...
I am using the latest beta of IRSS and would like to send a command to an unfocused window. I have an MCE remote and in IR...
Wow!! Can't believe there has been no response so far!
Anyway, search for MPTrayMod. You would have to do two things for this to work.
1) Disable VMC. There is registry hack and also a more elegant way. I do not remember how and what I did for my setup now. There are a few good threads on this. Search the forums...
Wow!! Can't believe there has been no response so far!
Anyway, search for MPTrayMod. You would have to do two things for this to...
Hello,
I have switched from VMC to MP and just wow, its so much faster and out of the box ffdshow works as well. I have set up...
I have a Slingbox AV accompanies with Tivo series 2. They work perfectly for remote watching Tivo's live TV and recorded programs. Here is my question:
I have a spare Tivo Remote controller and a RC6 USB dongle. Is ther any method that I can use the Tivo remote controller to control the sling player virtual Tivo controller interface...
I have a Slingbox AV accompanies with Tivo series 2. They work perfectly for remote watching Tivo's live TV and recorded programs...
I have a Slingbox AV accompanies with Tivo series 2. They work perfectly for remote watching Tivo's live TV and recorded programs...
cool, I just picked up a microsoft mce remote a couple of days ago... Ill check out that remote, thanks a lot!
cool, I just picked up a microsoft mce remote a couple of days ago... Ill check out that remote, thanks a lot!
Cuing from posts here and there, it looks like a custom Dish remote protocol is going to have to be added to the detection...
So this little remote works as a general HID device, but sends keystrokes that do not map well to Media Portal out of the box. The current solution is to use the latest EventGhost SVN build and map key presses to MP events. The only downside currently is that some keys are captured by EventGhost and sent to the bit bucket when not...
So this little remote works as a general HID device, but sends keystrokes that do not map well to Media Portal out of the box. The...
Hello all:
I am not sure this is the right forum to be asking this question, but I recently purchased a "Media Center" remote...
Hello All:
I have really really tried hard to get this remote to work under Windows XP:
Newegg.com - Anyware GP-IR02BK Vista 2 channel IR Remote Control
I currently have media portal running on Vista but would would like to use this with an XP based MP system. I have scoured these forums and google, tried everything but the...
Hello All:
I have really really tried hard to get this remote to work under Windows XP:
Newegg.com - Anyware GP-IR02BK Vista...
Hello All:
I have really really tried hard to get this remote to work under Windows XP:
Newegg.com - Anyware GP-IR02BK Vista...
Hi, I'm a bit confused about this plugin and how it works. I've read through the stickys, but all the posts seem very old and referring to old versions of the software - so I'm not sure if they are still relevant or not.
My MCE remote currently works great in MP, but I just need a little extra functionality. I currently have two of...
Hi, I'm a bit confused about this plugin and how it works. I've read through the stickys, but all the posts seem very old and...
Hi, I'm a bit confused about this plugin and how it works. I've read through the stickys, but all the posts seem very old and...
Anyone solved this problem? It make me crazy!!!!
Anyone solved this problem? It make me crazy!!!!
How to get this working?
winlirc works great, with my scrapbuilt ir receiver, and hp remote.
My Ir server input thingie is set...
I've try something and that works :
I've uninstalled the remote in panel control of vista, restarted my computer and let vista install again the original driver.
I've activated the MCE plugin (the original one) in Mediaportal and I've installed Evenghost with the default plugins (i've stopped those i don't need). I add the plugin for...
I've try something and that works :
I've uninstalled the remote in panel control of vista, restarted my computer and let vista...
Hi,
I've installed Mediaportal, selected my skin and configured all plugins but now i have a big problem to control all of this...
New observation,
if I switch off from the MCE remote button PC ON/OFF the event mapper works correcly (I vasn't able to do that before because my old remote have a broken on/off button)
As told before, goin ont the power off menu in the main menu and chosig "sleep" or "suspend" the mapper doesn't get anything
Someone out...
New observation,
if I switch off from the MCE remote button PC ON/OFF the event mapper works correcly (I vasn't able to do that...
Hi Aaron,
Vie installed IR suite, and I'm using the MP control plugin,
I've mapped the following event:
mp start: turn on...
So here's my problem and I suspect IR suite is the answer - but after searching the forum, I'm still not quite sure.
I run Vista MCE on Windows 7 and have a gyration remote plus an eHome USB IR Tx/Rx although its only currently used to blast the STB.
So far all works well, but I'd really like my Gyration volume control buttons to...
So here's my problem and I suspect IR suite is the answer - but after searching the forum, I'm still not quite sure.
I run Vista...
So here's my problem and I suspect IR suite is the answer - but after searching the forum, I'm still not quite sure.
I run Vista...
Im having a problem with dboxtuner, it use to work fine untill i rebuilt my PC and now it GPRs when i run it. The error is:
Command: Zap, Channel: 89
Unhandled Exception: System.IO.FileNotFoundException: Could not find file 'C:\Do
cuments and Settings\All Users\Application Data\IR Server Suite\Dbox Tuner\Data.
xml'.
File...
Im having a problem with dboxtuner, it use to work fine untill i rebuilt my PC and now it GPRs when i run it. The error is...
It's Dreambox unsoported by ir server suit??? The list of stb pre loaded with pluguin appers Dreambox 7000, but don't work.
The ir...
As the subject says, is it possible to do?
As the subject says, is it possible to do?
As the subject says, is it possible to do?
Thanks for the reply.
That solution doesn't really work for me. There are often times that I leave the TV unattended with just the desktop displayed and MP isn't open. I really need the Windows screensaver to be enabled.
It would be cool if the MP screensaver disabled the Windows screensaver while MP was running so I wouldn't...
Thanks for the reply.
That solution doesn't really work for me. There are often times that I leave the TV unattended with just...
Hello,
I was using the original MCE plugin with problems. It lose its function after playing a video (for instance). Only arrows...
No one knows how to stop IR Server from sending 3 commands instead of one?
No one knows how to stop IR Server from sending 3 commands instead of one?
First off, thank you and-81 for a great plugin! Unfortunately I'm having a little problem with it. I'm trying to use it to control...
you can use Air Mouse.
you can use Air Mouse.
Hi, would it be possible to create a "remote" program for iPhone, or make changes to Web Remote so it shows in fullscreen like a...
Hi Lolento. Thanks for your reply. I dont have a problem as such. I just wanted to control MPC through translator. So for this, I add a new application and then add keymap settings to it? How do I add keymap settings to the MPC application?
Btw, have you used the virtual remote application? I wonder if I can use the virtual remote...
Hi Lolento. Thanks for your reply. I dont have a problem as such. I just wanted to control MPC through translator. So for this, I...
Hi,
I mapped out the PowerDVD keyboard shortcuts under translator to my MCE remote.
When PowerDVD is in window mode...
this one's come up a few times. i posted a thread about it when i encountered the problem a few weeks ago, i've also replied on another thread about the same thing
https://forum.team-mediaportal.com/mce-replacement-plugin-165/mce-services-came-back-51062/...
this one's come up a few times. i posted a thread about it when i encountered the problem a few weeks ago, i've also replied on...
Hello
I have installed IR Server Suite - Test Build 1.4.2.2391 on MP 1.0 and have found the following...
I am using this remote...
yes and no. It does have this issue on resuming from sleep, however it also has this issue randomly even if the PC hasnt been put to sleep. Is it possible that MediaCenter can be messing with things? I have noticed that sometimes when this happens MediaCenter has been opened due to MC shortcuts on my remote being pushed.
yes and no. It does have this issue on resuming from sleep, however it also has this issue randomly even if the PC hasnt been put...
My blaster just stopped working. The red light doesnt even blink anymore on the little IR bug. I am at a loss for any ideas on...
OK. I have donated to Team MP.
OK. I have donated to Team MP.
Hi All,
I have been having trouble getting the MCE IR blaster change channels.
I am using MP 1.0. The stable build of IRSS...
Hi!
I've just built a new HTPC.
I also purchased a Genius Remote 300.
The Genius 300 remote and USB receiver dongle work really well with Media Portal.
However, I want to use the USB receiver dongle to pick up my universal remote (I don't even want to use the Genius 300 remote itself, just the USB receiver)
I tried...
Hi!
I've just built a new HTPC.
I also purchased a Genius Remote 300.
The Genius 300 remote and USB receiver dongle work...
Hi!
I've just built a new HTPC.
I also purchased a Genius Remote 300.
The Genius 300 remote and USB receiver dongle work...
check all the following :
all 3 media centre services are disabled
the HID service is disabled
ehtray.exe is disabled from loading at startup
check all the following :
all 3 media centre services are disabled
the HID service is disabled
ehtray.exe is disabled from...
I've just started using the great plugin, but after following the comprehensive setup guides and doco, I got one small niggly issue...
i'm having the same problems, worked fine for the last couple of months, and now it's broken.
the exact problem is that the windows eHome driver seems to be loading on startup, and this somehow takes precedence over the Input Service, or breaks it somehow. so instead of receiving remote commands thru the input service (with all the...
i'm having the same problems, worked fine for the last couple of months, and now it's broken.
the exact problem is that the...
Using MP 1, and 1.04.1 and now the latest test build of IRSS.
Was working perfectly, as per usual, with my MCE remote...
As my struggles to get the IR blasting to STB continues, I think I have discovered a bug in TV3 Blaster Plugin.
I have freshly reinstalled Vista Ultimate and updated Windows. Then I have installed MP 1.0 and the latest beta build 2391 of IRSS Version 1.4.2.
The macros are getting created in the folder C:\ProgramData\IR Server...
As my struggles to get the IR blasting to STB continues, I think I have discovered a bug in TV3 Blaster Plugin.
I have freshly...
As my struggles to get the IR blasting to STB continues, I think I have discovered a bug in TV3 Blaster Plugin.
I have freshly...
I disabled VMC via services... lets hope that works.
I am going to start a new thread on getting the Gyration remote to work. I did some digging and it looks like others have sucessfully got the remote to work with MP, but I dont see anything about getting it working with the blaster. I am sure we can figure it out!
I disabled VMC via services... lets hope that works.
I am going to start a new thread on getting the Gyration remote to work...
Hello All,
Here is my set up:
Vista Home Premium
MediaPortal 1.0
TVServer 1.0
Pentium 920D (dual core)
PQI 2gb DDR2...
I'm also having trouble getting this patch to work with the current 2391 build. The MCE tranceiver plugin fails to load and I assume due it's being for the earlier 2096 build of IR server suite.
Any chance of an update or failing that, has anyone got the older 2096 build of IR server suite they can post?
I'm also having trouble getting this patch to work with the current 2391 build. The MCE tranceiver plugin fails to load and I...
I posted the above in one of the stickies - I have a bit more info, so though I'd start a new thread.
This is with the MCE...