General talk regarding our HTPC-software MediaPortal 1 takes place here.
agreed here was a nice feature
agreed here was a nice feature
I see that the feature "Timeshiftbuffer is added to a "Record now" recording" (needed to record tv that someone is watching, while...
I had the same problem.
Check your daemon tools configuration. Check that your drive 0 has a drive letter like e:
Now go to the MP configuration and make sure the same settings are set there.
I had the same problem.
Check your daemon tools configuration. Check that your drive 0 has a drive letter like e:
Now go to the...
I have a problem when playing back ISO files in MyFilms...
When playing back MKV files there is no problem, i click play and the...
I see :).
I see :).
Why is windows media player 11 required when installing TV server only. I have a server that will run TV server, I have no need for...
Hi!
In my multiseat setup I've a scenic E600 PC built as a client (1Gig Ram, windows Xp, all updates, WMP11). All works fine, except for the mini EPG and TV Guide. Both are terrible slow. If i press ok in fullscreen TV it needs about 10 Sek until the mini EPG is shown, and each button press needs 1-5 seconds before something...
Hi!
In my multiseat setup I've a scenic E600 PC built as a client (1Gig Ram, windows Xp, all updates, WMP11). All works fine...
Hi!
In my multiseat setup I've a scenic E600 PC built as a client (1Gig Ram, windows Xp, all updates, WMP11). All works fine...
So are you saying it currently works for you with TV Server. I attempted to use it but it didn't seem to do anyhing. I am recording to Mpeg TS. It is not H264. Do you have steps to follow, maybe I'm not doing something right?
So are you saying it currently works for you with TV Server. I attempted to use it but it didn't seem to do anyhing. I am...
Is it possible to use the compress option when using TVServer? I can see the option to compress but it doesn't work. Or I am...
No did not contact support because I think it is an ATI/Stardock problem. Otherwise I can't see any mentioned effort through updating drivers...
I do not know which cards are already supported by 8.8, but you can look for it at amd.com I am sure..
No did not contact support because I think it is an ATI/Stardock problem. Otherwise I can't see any mentioned effort through...
is working rc3 wmr9 on secondary display?
I dont want to install back old version, thx
thanks for the help but my problem with this is that im using vista and they only have an unstable version for it and says use at your own risk.
thanks for the help but my problem with this is that im using vista and they only have an unstable version for it and says use at...
hey peps im looking for a way to have one seemless menu in my menu with 3 different hard drives, and i dont need a imdb database. i...
I haven't tryed out new updates for MP lately but tody i thought that I would give it try now we are so close on the final release.
Nice nice nice realy! It looks nicely and run perfect, BUT!
I have now used the same time on setting up the TV Guide as I used to install and configure all the rest! ... and it still not works :(...
I haven't tryed out new updates for MP lately but tody i thought that I would give it try now we are so close on the final...
I haven't tryed out new updates for MP lately but tody i thought that I would give it try now we are so close on the final...
Not yet.... but, keep an eye open for future developments.
Chuck
Not yet.... but, keep an eye open for future developments.
Chuck
Hey Guys,
I am using VMC right now, after trying Media Portal for a bit, then Meedio. Meedio was a pain to set up, Medial...
^I'm with him. I had nero 6 which worked okay, new DVD drive came with Nero 8 and its just plain bloated, obese even, and thats only the 'essentials' version.
Now i use freeware, ImgBurn for writing to discs, DVDFlick for writing videos, DVDDecrypter for ripping and Handbrake for encoding. The only thing i'm missing is a cover...
^I'm with him. I had nero 6 which worked okay, new DVD drive came with Nero 8 and its just plain bloated, obese even, and thats...
Hi,
I recently bought Nero 9 and installed.
The codec's aren't offered for selection in TV, Video or DVD sections as was the...
Wee Nice man, thanks a lot, i did not even see the "expert mode in MP"... lots more settings now.. cool.
ill try out the ISO thing... whit DeamonT :)
Wee Nice man, thanks a lot, i did not even see the "expert mode in MP"... lots more settings now.. cool.
ill try out the ISO...
i cant find a way to search for a movie. i have more then 10 networked drives setup
is there not a way i can search for a movie...
Hey i have a very big issue, and i dont now what to to about this...
When playing ISO files from inside my Mediaportal, i expirience the following problem (I'm using MyFilms, but i don't think thats the program causing the error)
- I Have a 42" Plasma tv, and when viewing and DVD Iso file, the movie is only a 4:3 downscaled on my tv...
Hey i have a very big issue, and i dont now what to to about this...
When playing ISO files from inside my Mediaportal, i...
Hey i have a very big issue, and i dont now what to to about this...
When playing ISO files from inside my Mediaportal, i...
You can find the player in the section plugins of the config. If you enable it you need to enter m4p in the field of the itunes plugin.
You can find the player in the section plugins of the config. If you enable it you need to enter m4p in the field of the itunes plugin.
Hi guys,
Just enabled the itunes plugin but am having a problem with playback. I have a share with both wma and m4p files...
there should be no changes. It sounds to me like you have installed the old TV engine when you ran the install script.
By default, if you say that you won't be watching HD tv or using more than one PC, then the old engine will be used.
I'd recommend uninstalling and then re-installing, but make sure that you say yes when asked if...
there should be no changes. It sounds to me like you have installed the old TV engine when you ran the install script.
By...
I had some problems with RC2 and have been trying the RC3 now.
As the tv-server is built-in into MP now, there are somethings...
I am on xp sp3.. downgraded from Vista because I had ongoing problems with hdmi audio stopping to work.. Should I upgrade once more?
UPDATE: When I deselected use hardware acceleration in pdvd8 settings in mediaportal configuration utility, everything works. But, if I set h-264 decoder to coreavc, and use pdvd8 for sd, switching from...
I am on xp sp3.. downgraded from Vista because I had ongoing problems with hdmi audio stopping to work.. Should I upgrade once...
Hi, I have been having huge problems with tv server and my gigabyte u7000 usb dvb-t tuner. First, when I configured the tv server...
For the card, I would suggest installing it as well as the software it came from and use the supplied software to work out the optimal place for the antenna and how good the reception is. TV cards usually aren't as good as actual TV's for reception, since the inside of a PC is a harsh place for radio waves but the cards do keep...
For the card, I would suggest installing it as well as the software it came from and use the supplied software to work out the...
Hey guys. I'm working on a mediacenter PC and I've gotten as far as getting mediaportal running with my movies and mp-tvseries so...
Ok, funnily enough I stumbled across the TV Server manual about 30mins ago and decided to stop the TV Server Service in windows and restart it. Now it pops up with a warning and says I have too many bugs and tries to take me to the wiki (however I am at work...and been naughty....so I can't view the page atm). Despite this the confi...
Ok, funnily enough I stumbled across the TV Server manual about 30mins ago and decided to stop the TV Server Service in windows and...
Right, where to begin?
Firstly I'm using RC2, purely because RC3 won't work on my system due to WMP 11 been needed and me not...
Mortuary more like it (a woman scorned springs to mind), leave Mepo alone, he's great :)
Mortuary more like it (a woman scorned springs to mind), leave Mepo alone, he's great :)
About the new MediaPortal guy who hold the movie roll and disc: "That guy plays the movies for me, mom".
Awesome :)
Thanks 2Bit. I grabbed PureVision and it is working fine. Also thanks to Catavolt for a great Skin. :thx::thx:
Thanks 2Bit. I grabbed PureVision and it is working fine. Also thanks to Catavolt for a great Skin. :thx::thx:
What skins are known to work with RC3?
I was using PM3 on RC1 with no problems and scored well on WAF unlike the default blue2...
Hallo zusammen,
ich habe das Problem das mein TV-Server beim Sendersuchlauf immer dann abstürtzt, wenn er so ca. 20 cender gefunden habe.
Bitte helft mir
Ich benutzte win xp prof mit sp2
die technisat cablestar hd2 (gibt es hierfür eigentlich bda treiber)
Hallo zusammen,
ich habe das Problem das mein TV-Server beim Sendersuchlauf immer dann abstürtzt, wenn er so ca. 20 cender...
Hallo zusammen,
ich habe das Problem das mein TV-Server beim Sendersuchlauf immer dann abstürtzt, wenn er so ca. 20 cender...
I am experimenting with MP1 for a year now. While using de RC builds and sometimes a SVN build, I found out about alot of problems with my hardware, drivers in combination with MediaPortal.
Yesterday I deinstalled RC2 and installed RC3 after upgrading all drivers. I added some plugins or programs to overcome some of the problems I...
I am experimenting with MP1 for a year now. While using de RC builds and sometimes a SVN build, I found out about alot of problems...
I am experimenting with MP1 for a year now. While using de RC builds and sometimes a SVN build, I found out about alot of problems...
Anyway it's shame that this very necessary feature is not in MediaPortal :(
Anyway it's shame that this very necessary feature is not in MediaPortal :(
I've searched for this on the forums but did not find any answers. I am trying to figure out if there is a way to create a...
One option is to replace the windows shell from explorer.exe to MP. This would require a reg hack, but it isn't difficult to do. I know this works for Meedio quite well, but haven't tested it for MP yet.
One option is to replace the windows shell from explorer.exe to MP. This would require a reg hack, but it isn't difficult to do...
I have been using my HTPC daily for the past 4 years for all media types TV, Pictures, Diaporamas,WITHOUT using an HTPC frontend...
Confirmed
I've the same problem, imdb ratings parsing doesn't work anymore. No matter if i use RC2 or RC3.
Confirmed
I've the same problem, imdb ratings parsing doesn't work anymore. No matter if i use RC2 or RC3.
Hey, am I the only one that have problems getting correct ratings when grabbing IMDB info? It use to work, but suddenly it stopped...
ok ill try that.
danke schön. :-)
ok ill try that.
danke schön. :-)
ive downloaded MP RC3 from work and want to take it home and set it up on my media centre at home. the trouble is i dont have an...
Hi,
what I basically wanted to know is if the TV Server
was installed or not.
If yes, then everything behaved correctly,
if not, then there might have been someting broken.
:thx: for reporting back
Hi,
what I basically wanted to know is if the TV Server
was installed or not.
If yes, then everything behaved correctly,
if not...
Hi everybody,
I had exactly the same issue when installing RC2, I have no idea how I resolved it at this time, and here it comes...
Yes, the RC3 has still the same issue.
The CPU Load of MediaPortal is about 60% if I have opend the EPG.
If I scroll down one Line, the CPU Load of mysqld-nt.exe is about 40% for 4 seconds. So total 100% CPU Load!
Yes, the RC3 has still the same issue.
The CPU Load of MediaPortal is about 60% if I have opend the EPG.
If I scroll down one...
Anyone more than me that thinks navigation in tv guide is very slow?
When holding in the down arrow in the EPG everything is...
sorry forgot about gpu, and its correct its the 690chipset
i will do a search for it,
thx
sorry forgot about gpu, and its correct its the 690chipset
i will do a search for it,
thx
hi
im using a asus pundit p2 with amd 4850e cpu
2gb ram
no tv card
it hangs immediatly when i open my music or my movies, i...
Similar problem here running XP: Using Catalyst 8.9 i get the flickering with VMR9. With EVR it is gone.
backslash
Similar problem here running XP: Using Catalyst 8.9 i get the flickering with VMR9. With EVR it is gone.
backslash
I have a working setup for mediaportal, but if I try to use EVR rather than vmr9, I get a flash of video, then a black screen...
Sorry, I have no clue...
Sorry, I have no clue...
Hey...
I have so far used VMC, only Because of the MyMovies plugin -To watch my -mkv and Iso movie-files.
I have searched for...
