General talk regarding our HTPC-software MediaPortal 1 takes place here.
Usually I do not react to those posts but I hardly believe you can crash a clean installed MP with MyMusic when not using unstable 3rd party stuff like some winamp plugins, etc.
Is there a log-featured bug report for all your crashes?
Usually I do not react to those posts but I hardly believe you can crash a clean installed MP with MyMusic when not using unstable...
Hi all, I was wondering if there was an estimated release date for 1.0 RC1?
Thanks for all the good work guys... whatever the...
I have exactly the same problem as the two guys above describe. Please let me know how I can help to track down this problem. It is (to me) sever as I am using Mediaportal in my livingroom as TV replacement. My wife likes to "switch on/off" the TV and it should respond quickly to this, so shutting down / rebooting every time is...
I have exactly the same problem as the two guys above describe. Please let me know how I can help to track down this problem. It is...
I noticed that after installing TV Server the "Standby" key on my HP desktop PC not longer works and puts the PC in standby. As...
Hi Forum,
I would like to know if someone could point me to some more detailed information about the following:
- How is service and device discovery between several tv server instances done? Is it by any chance based on UPnP?
- How is data streamed from tv servers to clients? I read something about RTSP, so is it save to assume...
Hi Forum,
I would like to know if someone could point me to some more detailed information about the following:
- How is...
Hi Forum,
I would like to know if someone could point me to some more detailed information about the following:
- How is...
heheh, it's happened to me once before too :)
heheh, it's happened to me once before too :)
Any chance there can be a confirmation dialog on the clear button (tv-channels) within tv-server setup. It happened to me 3 times...
You need to find irbus.inf in your windows\inf directory, and add the following line under [MicrosoftHw]:
%USB\VID_045E&PID_006D.DeviceDesc%=IrBus_RX, USB\VID_0609&PID_0334 ; SMK SF
The infrared drivers will then install, but you might find you have 'sticky keys' problem, where when you press 1 key on the remote it holds it down. I...
You need to find irbus.inf in your windows\inf directory, and add the following line under [MicrosoftHw]...
Hi all,
I have just installed MP (loving it so far, esp with the Xface skin!!) on my pC and am looking to get a TV card. Can...
I think if the distribution costs are covered and a donation per sale is made then there shouldn't be any trouble. If people are silly enough to spend money to get Media Portal then so be it, but the more people find out about Media Portal the better as it will bring in more people who can contribute on all fronts.
P.S. People...
I think if the distribution costs are covered and a donation per sale is made then there shouldn't be any trouble. If people are...
:arrow:
http://stores.ebay.ca/CytechNet_W0QQssPageNameZVIStoreHeaderLinksQQtZkm?
:roll:
:shock:
Hi. First post...
I install mid-range and high-end entertainment/automation/security systems for private homes. For people that want a HTPC with every TV I install MediaPortal along with whatever other software they want to use, some of them gravitate towards using MediaPortal all the time.
I have my production setup with 1 server and 4 clients, my...
I install mid-range and high-end entertainment/automation/security systems for private homes. For people that want a HTPC with...
I thought I'd do a summary of all the current issues I am seeing with the TV Server. I am getting these problems with all my...
cool ill give this app a try then!
cool ill give this app a try then!
hi i wonder if it is possible to strip/remove/disable features in this application. I only need video playback from HDD, myabe mp3...
Why is using VSFilter so CPU intensive? Subtitles via FFdshow takes only 25 % of CPU whereas via vobsub it is able to take even 100 % manytimes. Is it normal?
AMD64 3500+
t
Why is using VSFilter so CPU intensive? Subtitles via FFdshow takes only 25 % of CPU whereas via vobsub it is able to take even...
Why is using VSFilter so CPU intensive? Subtitles via FFdshow takes only 25 % of CPU whereas via vobsub it is able to take even...
Thanks for that. I was actually leaning towards the DVICO. I'll stick with the other now. :thx:
Thanks for that. I was actually leaning towards the DVICO. I'll stick with the other now. :thx:
Hi All,
I'm building my very first HTPC and I have a question over which tv tuner to buy - or even if i should buy one.
My...
slowly getting MP setup and loving it however i have over 100 movies and find it difficult to use the shares view as too many folders
i already have my movies split into folders i.e drama, romance etc but thought i'd add a Genre view. have setit up and appears to work fine but none of the movies are in the genre sections. i have...
slowly getting MP setup and loving it however i have over 100 movies and find it difficult to use the shares view as too many...
slowly getting MP setup and loving it however i have over 100 movies and find it difficult to use the shares view as too many...
this a is a simple and cheaper solution I use...
https://forum.team-mediaportal.com/2_tvs_and_1_mp-t31726.html?t=31726
this a is a simple and cheaper solution I use...
https://forum.team-mediaportal.com/2_tvs_and_1_mp-t31726.html?t=31726
Hi
I used MS media center for over a year now but would like the same tv options in other rooms now. That why I’m moving to...
I tried tight-VNC, and this worked even worse than UVNC for me (both works great for remote Desktop, as long as you dont star Mediaportal...)
However as I mentioned above Salling clicker (Swedish company :-) www.salling.com solved all problems I had with remote control of my computer. And no, you dont need to have Vista on the...
I tried tight-VNC, and this worked even worse than UVNC for me (both works great for remote Desktop, as long as you dont star...
Been lurking in this forum for year, but never posted. Dont really know why. Time to change!
Anyway: I love Mediaportal and the...
After I installed TV-server all my radio streams disapered and i can't find the same option on the TV-Server, I only had to write the Stream Folder Path before. Where is that option on TV-Server??
Hope someone can help me. :thx:
After I installed TV-server all my radio streams disapered and i can't find the same option on the TV-Server, I only had to write...
After I installed TV-server all my radio streams disapered and i can't find the same option on the TV-Server, I only had to write...
Hmmmm. Think i give up now and make a clean install of XP. Been spending more time searching for that file now than a clean will take.
Thanks for your help try to solve my mess:thx:
Regards
Lars
Hmmmm. Think i give up now and make a clean install of XP. Been spending more time searching for that file now than a clean will...
Hi.
I have some problem getting MP 2.3.0 to use the Core AVC codec.
The codec are shown in MY TV propperties(and selected)...
YES! if you will use a digital TV-card such as DVB-T - S or -C you will also be able to steam all channels on same mux/transponder for each card!!
See http://wiki.team-mediaportal.com/
http://wiki.team-mediaportal.com/Supported_TVCards
http://wiki.team-mediaportal.com/HomeTheatreSolutions...
YES! if you will use a digital TV-card such as DVB-T - S or -C you will also be able to steam all channels on same mux/transponder...
G'day all,
I'm in the process of getting all of the parts for a new HTPC.
I'm a bit confused with the capability of...
So stupid question how do you goto Live Tv in MP?
Im not using eHome driver. Using HIP, not sure i understand your reference to that anyhow.
So stupid question how do you goto Live Tv in MP?
Im not using eHome driver. Using HIP, not sure i understand your reference to...
Hi everyone,
Im new to MP and just a little confused with certain functions that dont seem to be there. Like from my MCE remote...
I lowered the Merit to 0 -- Do Not Use and after a reboot WMP-11 now uses PureVideo as per the MS codec tool. All is good! Thanks!
Oh, and a side note, MP once again creates thumbnails for recorded TV shows. Are the two related? I'm guessing MPV was causing the thumbs to be NOT created by the dvr-msImageGrabber *somehow* or...
I lowered the Merit to 0 -- Do Not Use and after a reboot WMP-11 now uses PureVideo as per the MS codec tool. All is good...
I downloaded 2 DVR applications to use with my Hauppauge HVR 1600. Media Portal 0.2.3.0 RC3, and Snapstream Beyond TV 4.7.1. I...
Assuming decimal
0160
binary representation
10100000
0232
binary representation
11101000
next byte serial
11111010
Next release number could be 0-2-5-0
:)
Assuming decimal
0160
binary representation
10100000
0232
binary representation
11101000
next byte serial
11111010...
Some rumours about Media Portal 2:
Core: completely redesigned, lightweight and rockstable
Skinengine:
3D based...
Forgot to mention I run 0.2.3 with svn Rev16553
Forgot to mention I run 0.2.3 with svn Rev16553
Hi,
I watch live tv in a multiseat environment with the TVEngine0.3. Does the timeshift buffer allways keep a few minutes of...
I jumped the gun here. It's not really working:-(
I can scan the analog channels and watch them in MP with TVServer3. But if I restart, I lose all the channels, and have to scan again to get them. No go, in my book.
Also, HDHomeRun is not working, now that I got the Hauppauge card sort of "working." HDHomeRun finds all the channels...
I jumped the gun here. It's not really working:-(
I can scan the analog channels and watch them in MP with TVServer3. But if I...
Anyone has the Hauppauge's WinTV-HVR-950 hybrid ATSC / NTSC TV tuner working in TVServer?
TVServer sees both the digital and the...
- Locked
that could be added as a note, but not more.
because the mediaportal manual in the wiki should only contain the description of the features which are inbuild in the application.
for MediaPortal 1 and TV-Server 1 we will require the help of the community to get both application described in detail in the wiki.
i will open an...
that could be added as a note, but not more.
because the mediaportal manual in the wiki should only contain the description of the...
We in New Zealand have been well served by the thread at:
https://forum.team-mediaportal.com/ca...you-t2321.html
which will...
- Locked
closed on request of the author. :)
closed on request of the author. :)
We in New Zealand have been well served by the thread at:
https://forum.team-mediaportal.com/ca...you-t2321.html
which will...
- Locked
closed on request of the author. :)
closed on request of the author. :)
This thread is to provide a place for contributing Batch and Executable files which create the tvguide.xml file for the guide.
- Locked
closed on request of the author. :)
closed on request of the author. :)
This thread is to provide a place for contributing Logos which can be used in the guide.
- Locked
closed on request of the author. :)
closed on request of the author. :)
We in New Zealand have been well served by the thread at...
Thanks for replying, I was thinking about throwing in a 160 gig 2.5" disk especially for SQL and mediaportals recording and timeshift files.
You just confirmed what I was thinking all along :)
Thanks for replying, I was thinking about throwing in a 160 gig 2.5" disk especially for SQL and mediaportals recording and...
Hi,
I have a WHS box pretty much completed, I was planning to just have is as a WHS box but then thought what the hell, if it...
I was aiming for 4 but DANG!!!!
Everything I have read about this product is AMAZING and seems to out shine the limitations that Microsoft has placed on the MCE.
Thaks for all the quick replies :)
I was aiming for 4 but DANG!!!!
Everything I have read about this product is AMAZING and seems to out shine the limitations that...
Hi I ma looking to move away from XP MCE and I am hoping to find the right answers here as the FAQ I don't think quite covers them...
Hi chris,
thanks for your input. When you say 'TT', do you also refer to Hauppauge as TT? Because the Nova-HD-S2 does not seem to be a TT-Product (at least TT does not seem to sell such a card). I think i have made up my mind to the Nova-S2 - think this is okay? How does yours work?
Regards,
Corwin
Hi chris,
thanks for your input. When you say 'TT', do you also refer to Hauppauge as TT? Because the Nova-HD-S2 does not seem...
Hi there,
I have been building a TV-Server, which runs fine so far. Only one Problem: It reboots once a day. Hard.
I think it...
i have absolutely no troubles here to watch h.264 dvb-s2 channels on Astra19.2°E with
TV-Server
MediaPortal 0.2.3.0 final
h.264 codec = coreavc 1.6 (cyberlink works too, but i dont like that codec ;) )
audio codec = MPA
using TSreader.ax
i have absolutely no troubles here to watch h.264 dvb-s2 channels on Astra19.2°E with
TV-Server
MediaPortal 0.2.3.0 final
h.264...
Hi there,
just bougt the new FireDTV S2 because it said that it is working well under MP and the CI is supported.
Good news...