General talk regarding our HTPC-software MediaPortal 1 takes place here.
I've uninstalled MP, clean install of 0.2.3 final and selected EVR in XP to display my films. Now all works fine, but i can't see wmv films... but that is another history...
regards,
I've uninstalled MP, clean install of 0.2.3 final and selected EVR in XP to display my films. Now all works fine, but i can't see...
TV-Server Version: ???
MediaPortal Version: 0.2.2 SR
Windows Version: XP prof
CPU Type: Celeron 3,33
HDD: 500gb
Memory: 1gb...
Ok, found it in another thread, but for the ones finding this thread:
disable the ati hotkey service, that worked for me. read that it is a known bug.
running now 7.10 fine.
sloty
Ok, found it in another thread, but for the ones finding this thread:
disable the ati hotkey service, that worked for me. read...
Hi,
my windows xp (new install!) allways forgets the setting to NOT ask for a password after wakeup/resume :(
Not found a...
i mean ... in my network port 21 are not allowed because on router this port is assigned to another computer so im using another ports like 23, 24 if i want to share my files over net, and locally too.
ie 83.10.112.21:23 -my computer 83.10.112.21:22 my wife computer and 83.10.112.21:24 computer in work
so im connecting on same...
i mean ... in my network port 21 are not allowed because on router this port is assigned to another computer so im using another...
I have a problem with FTP. im using cerberus ftp server and my lan/internet site is huge so FTP are setted for many ports like 23...
Just on one of those questions ... (1)
Most Video cards will have an S-Video (sometime called SVHS) or a Component break-out cable supplied.
The order of quality (starting with the worst):
1. Composite (this is the ubiquitous yellow, red and white cables. The red and white are left & right audio, the video is on the yellow...
Just on one of those questions ... (1)
Most Video cards will have an S-Video (sometime called SVHS) or a Component break-out cable...
I am a beginner to the HTPC world. Please be patient if you find my questions silly.
I would like to know the following:
1)...
Welcome to MediaPortal, Cybergeek .....
You can use ALT+enter to get rid of the top bar, and you can set MediaPortal to start in full screen and to be always on top from MediPortal Setup, in the General Settings section.
Welcome to MediaPortal, Cybergeek .....
You can use ALT+enter to get rid of the top bar, and you can set MediaPortal to start in...
Hi Guys I just downloaded media portal and I think it is much better then XP media center, however I am have one slight problem and...
Thanks for that. I just wanted to make sure that my setup was right and the right codec was being used.
Also useful for other newbies just starting in HTPC's on what is being transmitted in the land of meat pie's, tomato sauce and beer...mmmmmmmmmmm beer.......... :thx:
This is some extra info on the wiki. Look at the bottom...
Thanks for that. I just wanted to make sure that my setup was right and the right codec was being used.
Also useful for other...
Does anyone know what format Australian FTA (Free To Air) HD Channels are transmitting? Is it MPEG2 or H.264 and are they are going...
it will take months until next version is released. i doubt that the video db will change.
it will take months until next version is released. i doubt that the video db will change.
You are still @ feature freeze stage, right? I was expecting a rush for adding all pending new features and updates after 0.2.3.0...
you wont get the same view.
you can add "shares" in MediaPortal Configuration to Movies. this will then show you the files in the same way as Windows Explorer does.
different views (list, big icons, filmstrip ect.) are possible.
this looks pretty much like the TV-Series plugin for MediaPortal.
i would not use post-processing. but...
you wont get the same view.
you can add "shares" in MediaPortal Configuration to Movies. this will then show you the files in the...
Hi
I'm a long time XBMC user but now think its time to move due to the xboxs' lack of processing power as I want to watch HD...
Haha, yeah, its got a whopping 4MB, which was prob quite a bit back in 97.
OK, might have to upgrade :ooops:
Haha, yeah, its got a whopping 4MB, which was prob quite a bit back in 97.
OK, might have to upgrade :ooops:
After a period of frustration, I noticed on the sys requirements page that MediaPortal only runs on systems with DirectX9 supported...
You can view either by folder or by artists/album/genre etc if you have correctly tagged files. Have you added files to the database as well as adding the folders?
Under the configuration you need to goto: Music > Music Database and select update database from selected shares. This will scan all the folder's you've have added under...
You can view either by folder or by artists/album/genre etc if you have correctly tagged files. Have you added files to the...
Hello everybody,
i'm rather new to media portal, so i have many questions about it. I hope you experienced user can help me out...
I did it like this.
I made a "Children shows" folder where I put all his movies. Then I added the coverart with the same filename as the avi (except for the extension ofcourse :-). I.e Backyardigans.avi and Backyardigans.jpg. In the Children show-folder all movies with a coverart picture now displays the picture.
I did it like this.
I made a "Children shows" folder where I put all his movies. Then I added the coverart with the same filename...
help ! I am trying to set up a play list for my kids ( aged 2&3) .I have pleantry of movies for them to watch but they are all (...
Hiya guys. Dunno if this is right section so soz if not..
Does anybody know if it is possible to capture the sky anytime broadcast? I'm using a firedtv s2. I guess we need a frequency. The sky box records all broadcasts related to the specific box regardless of viewing card, then the viewing card decrypts the channels its...
Hiya guys. Dunno if this is right section so soz if not..
Does anybody know if it is possible to capture the sky anytime...
Hiya guys. Dunno if this is right section so soz if not..
Does anybody know if it is possible to capture the sky anytime...
In TVServer config Powerscheduler\processes, here you can add items that will stop powerscheduler shutting down whilst running.
In TVServer config Powerscheduler\processes, here you can add items that will stop powerscheduler shutting down whilst running.
Hello!
I have enabled powerscheduler from tv server configuration and also enabled powerscheduler client plugin from...
Hi,
nice one. :)
Flip
Hi,
nice one. :)
Flip
Hi all,
I just installed MediaPortal on my new HTPC (Vista 32, ATI HD2600 with Catalyst 7.10) but all xvid videos plays back...
Great success!
First I backup'd my 0.2.2.0 installation folder. Then I uninstalled 0.2.2.0, and I immediately installed 0.2.3.0 in the same folder.
Conclusion: the old configuration & all database are now used in 0.2.3.0
It took me about 15 minutes to upgrade! Most of the time went in configuring MyTvSeries, because I upgraded...
Great success!
First I backup'd my 0.2.2.0 installation folder. Then I uninstalled 0.2.2.0, and I immediately installed...
What's the best way to go from 0.2.2.0 to 0.2.3.0?
Is it possible to upgrade, without redoing the whole configuration? Can I use...
Hello,
I find that when I usetv server 0.3 it works perfectly for an idefinate amount of time, however, the tuners seem to stop working and I get the 'Unable to start timeshifitng no audio/video detected error'. If i restar the tvserver it works fine again but will evntually stop working.
I can't find any given thing which...
Hello,
I find that when I usetv server 0.3 it works perfectly for an idefinate amount of time, however, the tuners seem to stop...
Hello,
I find that when I usetv server 0.3 it works perfectly for an idefinate amount of time, however, the tuners seem to stop...
I am having a rather strange problem.
Like everyone else, I do not want my DVD to spin @ 18x.
Problem is:
- The internal drive speed setting does not work (unresponsive DVD playback)
- With Nero DriveSpeed started: same result as above
Solution:
- Starting Nero Drivespeed
- Killing Drivespeed process
- Playback is OK...
I am having a rather strange problem.
Like everyone else, I do not want my DVD to spin @ 18x.
Problem is:
- The internal drive...
I am having a rather strange problem.
Like everyone else, I do not want my DVD to spin @ 18x.
Problem is:
- The internal drive...
- Locked
you digged up an OOOOOOLD thread. :D
you digged up an OOOOOOLD thread. :D
Mediaportal development is not going in the right direction.
The SVN build is to unstable. Yes: SVN is BETA or less.
Stability...
@ paranoid
I never think about a definitive answer! I'm using Windows ;) ... and thanks für your kind help!
here we go ...
Resume from suspend (without MP started) didn't work too.
If i start the Server Setup all channels and groups are visible but if i try a preview it fails "unknown error".
So i'm thinking you're right. The...
@ paranoid
I never think about a definitive answer! I'm using Windows ;) ... and thanks für your kind help!
here we go ...
Resume...
Hi together!
After the Htpc wakes up from suspend, MP can't connect to the TV-Server. Start it "normal" works perfekt.
latest...
Nice to hear that the presentation went well.
Nice to hear that the presentation went well.
I am presenting at the GaETC conference this week on how MediaPortal could be used in a school to manage the TV recording, media...
slowly converting my old pc into a HTPC went and got the nVidia 6200 but slowly upgrading piece by piece.
slowly converting my old pc into a HTPC went and got the nVidia 6200 but slowly upgrading piece by piece.
Hi guys,
As the title suggest, I’m considering converting a PC that I built up using spare parts from my gaming PC into a media...
Hi,
actually I develop a hardware which can be plugged to the PowerConnector of any HTPC and which switch on and off the PC at the time you want.
E.g. if you want to record a TV show, the HTPC will boot in time and will be shutdown after recording. There is nearby no limit for the scheduler
for switching on or off. It is...
Hi,
actually I develop a hardware which can be plugged to the PowerConnector of any HTPC and which switch on and off the PC at...
Hi,
actually I develop a hardware which can be plugged to the PowerConnector of any HTPC and which switch on and off the PC at...
Solved. Installed the final RC3. Still sync issue.
So, I unistalled K-Lite, cleaned the registry. Installed the latest Vista Codec Pack 4.53 Beta 2.
Changed the codecs from Cyberlink to ffdshow for Video and from Cyberlink to AC3 for Audio.
Something worked, because now I have perfect sync with RMVB:-)
Solved. Installed the final RC3. Still sync issue.
So, I unistalled K-Lite, cleaned the registry. Installed the latest Vista Codec...
It started happening with the recent builds. I hadn't changed codec, but tonight I played with it for a while, installing and...
It is in the homepage - news section.
It is in the homepage - news section.
You can download it from their servers and everything.
Is that correct? I wanted to check out the changelog, but it isn't...
My problems:
I have MP show in the livingroom(projektor)+cabel to the computer in the bedroom.
When i see a movie on MP and my whife going to use internet,the MP shutdown in the livingroom!.but it still
going on the computer.its only when i use movie,music .in the menu it don't shutdown.
im having vista 32.
And i want to use...
My problems:
I have MP show in the livingroom(projektor)+cabel to the computer in the bedroom.
When i see a movie on MP and my...
My problems:
I have MP show in the livingroom(projektor)+cabel to the computer in the bedroom.
When i see a movie on MP and my...
Ok last night I did a little test
I was recording on one channel went to the guide and selected a different channel that was on the same QAM frequency, I didn't get any error, the recording seemed to be unharmed and I was able to watch the other channel with out any difficulty. As far as I can tell, they just have to be on the same...
Ok last night I did a little test
I was recording on one channel went to the guide and selected a different channel that was on...
I remember reading a while back that with TVServer you can record/watch 2 ATSC channels simultaneously, using 1 digital tuner (I...
What you need is a tuner with cable card. Problem is, as of May of 07 (I haven't checked lately), there's only OEM solution, as part of a new MCE computer. There is no separate tuner that you can purchase. ATI as going to release a stand alone box with interface to the computer, probably through USB, but I've heard they had some...
What you need is a tuner with cable card. Problem is, as of May of 07 (I haven't checked lately), there's only OEM solution, as...
Hello All,
I recently set up my Media Portal, all is well i am amazed at how many features and how smooth it runs.
Since i...
thx
thx
Hi
I'm using mac mini (intel CD 1.66, 1G ram) + mac os x as my HTPC, I like to move to MP.
1 - Is there any known MP issues...
Wait for the next version of IR Server Suite and try it. The IR learn/blast routines have been improved and might solve your problem.
Gimme a few more days to fix the 64-bit support and then there should be a new version of IR Server Suite.
Cheers,
Wait for the next version of IR Server Suite and try it. The IR learn/blast routines have been improved and might solve your...
First, I apologize if this is posted in the wrong forum.
I have Windows XP Pro and purchased an MCE Remote (2005 Version) to...
Have a look through the TV Engine 3 - Development sub forum for a thread titled "Self Contained Web Server / Interface". The first page in that fairly long thread will give you a link to a very good Web Interface that includes a web server in the package. Its produced by Big_Kev and does the job very well indeed.
When your not at...
Have a look through the TV Engine 3 - Development sub forum for a thread titled "Self Contained Web Server / Interface". The first...
Hi all...still very new to MP for bear with me.
Can I install MP TV-Server and a plug-in that will allow me to access my...