I know its the problem, now if you could get a fx5200 or higher you may have a chance.
I know its the problem, now if you could get a fx5200 or higher you may have a chance.
Hi Guys and gals.
Great forum and a superb bit of software - I cant believe how much better it is than Microsofts useless MCE. I...
Homepage, top righthand side, most links there as well :)
Homepage, top righthand side, most links there as well :)
Can someone give me the link and step by step instructions to download a weekly SVN build?
Thanks
I organize it in this way:
folder for each letter+ folder.jpg for the letter/artist+ folder.jpg for the artist/album + folder.jpg for the album/track.mp3
Unfortunately MP doesn't support this structur automatically with Small Icon/Small Icon/Cover/List so I must set it manually (or I havn't found it yet to organize it in this...
I organize it in this way:
folder for each letter+ folder.jpg for the letter/artist+ folder.jpg for the artist/album +...
Hi,
What is the best way of organising my music folders for use in MP?
I usually have mine as c:\music\artist\album...
maybe an "On Now" hover bouncing about a blank screen with the image and channel# or DVD Name and the word PAUSED... or a "Now Playing" image/song-info hover for music that is playing unattended after a few minutes. ... just so you know that the display is still on.
Chuck
maybe an "On Now" hover bouncing about a blank screen with the image and channel# or DVD Name and the word PAUSED... or a "Now...
Ok, so I'm new and just setting this up. How do I get the screensaver options working correctly?
I've messed with the settings...
Thanks for the suggestions, guys. It seemed like WMP and MP were not using the same codec for some reason, and I couldn't figure out why (or what MP used -- WMP used CoreAVC). Even with PowerDVD being selected as the default for .mts, CoreAVC "took over" in WMP.
So, I figured I'd remove them all and try them one by one... First, I...
Thanks for the suggestions, guys. It seemed like WMP and MP were not using the same codec for some reason, and I couldn't figure...
I have CoreAVC, ffdshow, and Cyberline Power DVD installed -- and each provides a codec for h.264/avchd playback. Playing x.264...
Thanks for the replies guys. In the end I went for this and this...
I really do like the dinovo mini, but I can't justify the expense...
Thanks for the replies guys. In the end I went for this and this...
I really do like the dinovo mini, but I can't justify the...
Hi everyone, I plan to make a new PC for media portal next week!
I don't have an IR receiver, but I have an Xbox 360 HD-DVD...
Aha, you are soo correct. I couldn't work out what all that was for.
I stand corrected.
Thanks!
Aha, you are soo correct. I couldn't work out what all that was for.
I stand corrected.
Thanks!
I have tried to search for this, and read the Wiki, but to no end.
This may sound dumb, but how can I exit out of the...
Hi all,
I just started using Media Portal and am very impressed!
I'm having a strange problem that i could use some help with. When exiting playing a video, the main screen comes back twice as large (so only half of it or so shows up on the screen). Does anyone have any idea how to solve this?
thanks...
I'm going to post...
Hi all,
I just started using Media Portal and am very impressed!
I'm having a strange problem that i could use some help...
Hi all,
I just started using Media Portal and am very impressed!
I'm having a strange problem that i could use some help...
:growl:
Today I did some further tests.
By chance I had a look at the distribution box.
I have internet-connection and TV over cable and there was
an filter installed in the distribution box.
Just uninstalled the filter and all channels work fine.
Internt connection is still working.
So don't know why this stupid filter was...
:growl:
Today I did some further tests.
By chance I had a look at the distribution box.
I have internet-connection and TV over...
Hello All,
just built my HTPC and installed MP und TV Server. PowerDVD 7 is installed aswell.
Provider is local digital...
If you have not already figured it out when you install the upstairs system, chose the advanced install and select the 4th option 'Mediaportal Client'.
Trevor
If you have not already figured it out when you install the upstairs system, chose the advanced install and select the 4th option...
Hi everyone. I'm a new user to MediaPortal, but have successfully installed TV-Server and Client to my machine down stairs, but...
Dubyahjay, Thank you for the suggestion. I'll try that tonight.
I'm surprised that no one has been able to respond with directions to a sticky or walk through where someone else has had the same problem. I can't be the only person with this issue.
Thanks again, D.
Dubyahjay, Thank you for the suggestion. I'll try that tonight.
I'm surprised that no one has been able to respond with...
Hi All,
I've spent a couple of weeks now trying to install MP and have been stymied. Here's what I'm working with...
:thx: that helps a little not a program for timid! MCE is basicly buy the corect parts and your set. I usaly make things harder than they realy are then when it clicks its like DOH
:thx: that helps a little not a program for timid! MCE is basicly buy the corect parts and your set. I usaly make things harder...
Wanted to say HELLO. I have been a MCE 05 user since it came out. I was a MS Partner and they sent me an early release. I was like...
The DTV1800H has hardware encoding. Anyone got it working with MP? It's a great price these days, available in Australia for $65, and it would be great if support could be included.
Sorry forget the 1800H. I had the wrong model. The model I am interested is the Leadtek DVR3100 H.
The DTV1800H has hardware encoding. Anyone got it working with MP? It's a great price these days, available in Australia for $65...
I have MediaPortal installed in a slimline Acer Desktop and am currently just using if for media that is stored on my PC.
In my...
GeneralRequirements - MediaPortal Wiki Documentation
Check out supported OS's
:sorry:
GeneralRequirements - MediaPortal Wiki Documentation
Check out supported OS's
:sorry:
install it...
All I get is...
MediaPortal,DeployTool.exe - Application Error
"The application failed to initialize properly...
Now that it's summer I'm thinking of re-examining my HTPC setup, and seeing what else is out there and what might be better. Two years ago I had a MythTV setup, which worked per se. But configuration was a PITA, and I never fully got my MCE remote working on it. It's music interface sucked. I used it as a glorified digital VCR /...
Now that it's summer I'm thinking of re-examining my HTPC setup, and seeing what else is out there and what might be better. Two...
Now that it's summer I'm thinking of re-examining my HTPC setup, and seeing what else is out there and what might be better. Two...
My understanding is that mkv is just a container format, so as long as you have some kind of codec installed that can read that format, then whatever the media itself is underneath is what is interpreted and played as video.
So if it's mpeg or h.264 underneath the mkv, then yes cyberlink can hardware accellerate. If it's xvid, or...
My understanding is that mkv is just a container format, so as long as you have some kind of codec installed that can read that...
with a p4 2.8 ghz and a geforce 7300GT 256MB
would I be better off with purevideo or powerdvd for hardware video support?
Thanks for the info. I have pretty much the same requirements. Only difference is I have a few button on the case that I would like to get working. I don't have the 7" lcd like you, just the iMon VFD.
I am pretty busy getting ready for a trip to Spain, but will try to look at the links you sent me before I leave.
Regards,
Kevin
Thanks for the info. I have pretty much the same requirements. Only difference is I have a few button on the case that I would...
I'm hoping someone can help me with this one, as I can't seem to find what I am looking for searching the fourms.
I am using a...
There is a separate Schedules Direct plugin for TV Server (I have it too), as well as stand alone MP. Make sure you have the right one.
good luck
Chuck
There is a separate Schedules Direct plugin for TV Server (I have it too), as well as stand alone MP. Make sure you have the right...
I just got back from over seas and found out that CT TV Listing has been sold and their service (i.e. my EPG feed) has been...
I deleted a reply it was the wrong Place to ask.
I deleted a reply it was the wrong Place to ask.
I just finished setting up my first HTPC. It's something I was really looking forward too.
I preferred MP over anything else...
Electronic Program Guide - MediaPortal Forum
Top 3 posts are all Aussie epg related, Big Kev does a good job of keeping things updated, but its a matter of choice and not being Oz based myself cannot comment on actually how good these are.
Which plugin are you trying to use, would always recommend getting MP basic up and running...
Electronic Program Guide - MediaPortal Forum
Top 3 posts are all Aussie epg related, Big Kev does a good job of keeping things...
I tried mediaportal and somehow the videos do not seem as clean as the VMC rendering. VMC rendering of videos is brighter and the...
Upgraded to latest FFDSHOW, now everything is fine! :)
Upgraded to latest FFDSHOW, now everything is fine! :)
I must have done something that caused MP to display green Audio Codec Info when playing .AVI -files!?
Anyone got the answer to...
Installing PlayFLV alone was NOT sufficient in my case. I also needed to install the FLV-Splitter from here ! (important: the Splitter in this download works, there are others out there which didn't work for me !)
-level20peon
EDIT: OK, seems like PlayFLV installs the FLV-Splitter, but the version differs (1.0.0.1 is installed...
Installing PlayFLV alone was NOT sufficient in my case. I also needed to install the FLV-Splitter from here ! (important: the...
I'm hoping someone could tell me if it's possible to play FLV videos in MP with out using an external player.
:thx:
Hi
One of my fiends just bought an Terretec USB XXS dvb-tuner with remote. Of course I recommended Mediaportal instead of Windows MCE. BUT... his remote won't control MP. Only the Cursor up-down-left-right and ok buttons are working.
How can I get his remote to control MP?
/Nyll
Hi
One of my fiends just bought an Terretec USB XXS dvb-tuner with remote. Of course I recommended Mediaportal instead of Windows...
Hi
One of my fiends just bought an Terretec USB XXS dvb-tuner with remote. Of course I recommended Mediaportal instead of Windows...
Hello
I'm having a bit of a problem
I'm running my mediacenter in my livingroom on an LCD monitor. When I set the resolution to 1360x768 to match the resolution in my LCD all my movies play choppy, be they Xvid or MKV (x.264).
But when I run it at 1280x720 (HDTV mode) its an ATI card they run smoothly - trouble is this is not...
Hello
I'm having a bit of a problem
I'm running my mediacenter in my livingroom on an LCD monitor. When I set the resolution...
Hello
I'm having a bit of a problem
I'm running my mediacenter in my livingroom on an LCD monitor. When I set the resolution...
It still doesn't work.
1) The plugin is enabled
2) right clicked and choose Configure
3) entered wma in the textbox
4) Winamp is running in the background
Still nothing :S
It still doesn't work.
1) The plugin is enabled
2) right clicked and choose Configure
3) entered wma in the textbox
4) Winamp...
Hey Everybody
Trying to play DRM protected WMA files. It does not work. So I wanted to use Winamp to play music in MP, but how...
Hello everybody,
I'm also a newbie and hope to find information how to get mediaportal working (excuse my english I'm from holland)
The tv server sees my videocard but doens't find the channels, I get the following message in my log
at TvService.ChannelScanning.Scan(IChannel channel, ScanParameters settings)
2008-05-29...
Hello everybody,
I'm also a newbie and hope to find information how to get mediaportal working (excuse my english I'm from...
Hello everybody,
I'm also a newbie and hope to find information how to get mediaportal working (excuse my english I'm from...
I've followed the " IR Server Suite to resolve Remote ..." tutorial by Geert-Jan to get media portal, Harmony 880, and IR Server to function as expected. Thanks to Geert-Jan for a very well written document. I can report everything works very well under Vista x64.
Now, I am trying to understand what I did when following the...
I've followed the " IR Server Suite to resolve Remote ..." tutorial by Geert-Jan to get media portal, Harmony 880, and IR Server to...
I've followed the " IR Server Suite to resolve Remote ..." tutorial by Geert-Jan to get media portal, Harmony 880, and IR Server to...
I will do the best I can to slow down
I wish Inker would have said: Multi-Posting as you did Paranoid Delusions.
Yes I am guilty of multi-posting,:sorry: but with an explanation.:D
You said, I am trying to run before you can walk. I will do the best I can to slow down and walk.:D
I have actually printed out and read the...
I will do the best I can to slow down
I wish Inker would have said: Multi-Posting as you did Paranoid Delusions.
Yes I am...
Inker deleted my post for, (Reason: Attention grabbing....):o
Is that the real reason?:S
Inker do you actually believe that...
Quicklinks mark forum as read.
Quicklinks mark forum as read.
Is there any way in the my (VIEW PROFILE) to mark a post as read?
It would make it easier to see the posts I do not need to go...
djphatic,
Thanks for replying, but I can't even get this screen up.
I have put the MyFilms .dll in: Program Files/Team MediaPortal/MediaPortal/Plugins/Windows
I then tried to load it into MediaPortal and got this message:
Default Error loading MyFilms with MediaPortal
See the end of this message for details on invoking...
djphatic,
Thanks for replying, but I can't even get this screen up.
I have put the MyFilms .dll in: Program Files/Team...
Ok, I think I am almost there. My question is in BOLD.
I have AMC up and running.
I have MyFilms loaded into MediaPortal as a...