Problems with the TV-Server or MyTV frontend? Post them in here.
I tried the ComproDTV4 bundled with the card, but the UI sucks and it has no hardware acceleration on H.264 so I didn't use it anymore...
I tried the ComproDTV4 bundled with the card, but the UI sucks and it has no hardware acceleration on H.264 so I didn't use it...
TV-Server Version: 0.9.4.20955
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: blue2 wide
Windows Version: XP SP3
CPU Type...
Not sure what the program wants, but at least as a developer I would like to see logs and some more information from you.
Not sure what the program wants, but at least as a developer I would like to see logs and some more information from you.
Hi,
I´ve installed MediaPortal 1.0 RC4 on a new Laptop, with Vista SP1, 2GB memory and 500GB HD. Enough from everything...
At least TV Server doesn't lock idle cards from use by other programs anymore. Mediaportal should be able to work out if a card is in use and then move to it's next assigned card. There was much discussion about this years ago when Web Scheduler and Digitalwatch were being developed. Both of those programs were system friendly and...
At least TV Server doesn't lock idle cards from use by other programs anymore. Mediaportal should be able to work out if a card is...
TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: Streamed MP
Windows Version: Vista Ultimate SP1
CPU Type...
Hi nl2rma,
See https://forum.team-mediaportal.com/development-91/help-us-nail-down-general-problems-some-technotrend-cards-34550/index5.html
Kind regards,
Hi nl2rma,
See...
Hi all,
Is it possible to use the TV server with a S2-3650 CI? I user driver 1.0.2.20, and when i want to preview a scrambled...
Thanx for the info, have to start looking into XMLTV...
Thanx for the info, have to start looking into XMLTV...
Hi, Is there any way to set the epg priority for 2 different tv cards?
For Example:
I have a DVB-S card installed that i use to...
Well i can reproduce this error if i insert the ipv6 adress in the tv-client options on windows 7. At moment i have the same problem. If i insert the name of the server it works but tooks a long time to load the plugins. When i configure the tv-client for use of the ipv4 address i don´t get any connection to the tv-server. I think one...
Well i can reproduce this error if i insert the ipv6 adress in the tv-client options on windows 7. At moment i have the same...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
I've done a fresh install and have found my channels, but when I go...
Your setup
How are your server/clients setup?
OS?
Codecs?
etc.
Your setup
How are your server/clients setup?
OS?
Codecs?
etc.
[TV-Server Version[RC4]:
MediaPortal Version[RC4]:
MediaPortal Skin[Blue3 w]:
Windows Version[XP SP3]:
I have a...
Not all software is using the APIs in the same sequence (or even at the same APIs). So different software can trigger different bugs in drivers. But as a thumb rule its impossible for software itself to cause BSOD, you always need a kerne side component for that (and a bug in it). MediaPortal doesn't itself have any kernel side...
Not all software is using the APIs in the same sequence (or even at the same APIs). So different software can trigger different...
TV-Server Version: 1.0.0.0 RC1
MediaPortal Version: 1.0.0.0 RC1
MediaPortal Skin: Default
Windows Version: MCE SP3
CPU Type...
I updated all the drivers and now it locks up two or three times a day. I'm moving back to snapstream until the 1.0 is released.
I updated all the drivers and now it locks up two or three times a day. I'm moving back to snapstream until the 1.0 is released.
TV-Server Version: 1.0.0.0 RC4
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: Blue3 Wide
Windows Version: Vista Business SP1...
Please, someone, give me a hint how to get things working
tried differend drivers for my card but no luck so far
Are my descriptions not that good?
Are my logfiles not right?
Please, someone, give me a hint how to get things working
tried differend drivers for my card but no luck so far
Are my...
TV-Server Version:MediaPortal TV-Server 1 RC2
MediaPortal Version:MediaPortal 1 RC2
MediaPortal Skin: blue, blue wide
Windows...
TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: XMasBlue3wide
Windows Version: XP SP3
CPU Type: AMD Athlon 64X2 4400+
HDD: Seagate 2x200
Memory: 2GB
Motherboard: MSI
Video Card: RADEON 9700 Pro
Video Card Driver:
Sound Card: Realtek AC97
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge...
TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: XMasBlue3wide
Windows Version: XP SP3
CPU Type: AMD Athlon...
TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: XMasBlue3wide
Windows Version: XP SP3
CPU Type: AMD Athlon...
Problem Fixed
Hi,
I finaly found the solution and perhaps the following lines can help someone else :D
There were 2 things missleading me.
1.) The remote client could connect to the TV-Server IP address 10.0.0.5 and read the EPG and start the streaming, but the stream itself cound not be displayed.
=> so I thought the client...
Problem Fixed
Hi,
I finaly found the solution and perhaps the following lines can help someone else :D
There were 2 things...
TV-Server Version: 1.0.0.0 RC4:
MediaPortal Version: 1.0.0.0 RC4:
Operating System: XP SP3:
Hi,
i have installed RC4...
Still working like a charme! .. have not set the priority on TVservice down to normal again to test, but there might be something to this setting. At least with better cable connections plus the pri on tvservice has made my Mediaportal experience rock stable :D
Still working like a charme! .. have not set the priority on TVservice down to normal again to test, but there might be something...
TV-Server Version: TVE3 1.0 RC3
MediaPortal Version: 1.0 RC3
MediaPortal Skin: Blue 3
Windows Version: Win XP SP2
CPU Type: AMD...
Bingo
Hi,
Thanks for that. Created a dummy channel & mapped to the single channel in my tvguide.xml and it then imported the programs.
This has been a slow journey for me so far, trying to pull together an HTPC to replace a very unreliable SkyHD box.
Basically it has to be full proof before i can let the family loose on it...
Bingo
Hi,
Thanks for that. Created a dummy channel & mapped to the single channel in my tvguide.xml and it then imported the...
Edit: You can ignore this message, I found in the forum how to solve it. the problem was I didn't click the Save button after...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3 wide
Windows Version: WinXP SP3
CPU Type: Intel Core Duo 6300
HDD: 2x640 GB Samsung
Memory: 2 GB
Motherboard: Asus P5B-E
Video Card: Asus GeForce 8600 GT
Video Card Driver:
Sound Card: Soundblaster Audigy
Sound Card AC3:
Sound Card Driver...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3 wide
Windows Version: WinXP SP3
CPU Type: Intel...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3 wide
Windows Version: WinXP SP3
CPU Type: Intel...
Was browsing for extra info on the upcoming Vista SP2 and found the following
.
Can this be a solution for my problems? Did anyone try to install the hotfix and can report the result?
Was browsing for extra info on the upcoming Vista SP2 and found the following
.
Can this be a solution for my problems? Did anyone...
TV-Server Version: RC2
MediaPortal Version: RC2
MediaPortal Skin: BlueTwo Wide
Windows Version: Vista Home SP1 32 Bit
CPU Type...
Same here... id like to know too
Same here... id like to know too
I need your help understanding possible problems
I have set up TV3 RC4 and a DVB-C card from knc1. all actual drivers
Video...
- Locked
MDAPI is always unsupported, no matter if its legal on illegal use people are having it for. One reason for that is that MDAPI itself creates lot of issues and users are always blaming TVE3 for those.
MDAPI is always unsupported, no matter if its legal on illegal use people are having it for. One reason for that is that MDAPI...
My 1st post is below. I recived answer:
But author did not read my question carefully:
So I do not see any illegall movements on...
you could write a simple bat so that when you run it, it will stop tvservice and start your game.
you could write a simple bat so that when you run it, it will stop tvservice and start your game.
Hello, please tell me what is the easiest way to prevent TV Server from automatically loading on Windows startup. I have looked in...
Maybe this helps:
After wakeup when only the card with the first tuned channel responds I can shutdown tvservice and DVBViewer still can use both cards. When tvservice is started again, only the card with the first tuned works like before - it is not important which card.
The problem seems to be TVServer specific bug, the cards...
Maybe this helps:
After wakeup when only the card with the first tuned channel responds I can shutdown tvservice and DVBViewer...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Black & White 1080
Windows Version: XP Pro SP3
CPU...
Nope, not a thing. The HD is silent, but the case illumination is on. Bugga, spose that means time to connect a monitor to it. I have seen it before where DVI connectors stop working and you have to plug a VGA back in and set them up again. Weird that MediaPortal would do that though. Cound be a coincidence, I spose...
Thanks...
Nope, not a thing. The HD is silent, but the case illumination is on. Bugga, spose that means time to connect a monitor to it. I...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
- Locked
Hi,
Use other forums for support on mdapi(we don't support it since it's illegal in many countries) & that you already should have read about when posting ...
Post Closed
Regards
Roy
Hi,
Use other forums for support on mdapi(we don't support it since it's illegal in many countries) & that you already should...
TV-Server Version: RC04
MediaPortal Version: RC04
MediaPortal Skin: Blue Retro
Windows Version: XP SP2
1. TV Card: TechniSat...
I have the same problem .. but I am using the same directory for all cards... so that couldn't be the fix for that .. all clients are RC3 no SVN
any other ideas?? would be great..
regards robertino
I have the same problem .. but I am using the same directory for all cards... so that couldn't be the fix for that .. all...
TV-Server Version: RC1.04
MediaPortal Version: RC1.04 and RC1.02
MediaPortal Skin: Blue
Windows Version: Vista64
CPU Type: AMD...
Ok, I searched and searched and cannot find any answers to my problem. I have version 1.0 RC4 of MediaPortal and TV-Server installed. I have WebEPG running and it does grab the channel lineup from UMDB. However it's for a completely different provider. Do I have to manually edit www_imdb_com.xml so the channel mapping matches my...
Ok, I searched and searched and cannot find any answers to my problem. I have version 1.0 RC4 of MediaPortal and TV-Server...
Ok, I searched and searched and cannot find any answers to my problem. I have version 1.0 RC4 of MediaPortal and TV-Server...
In TVServer config\epg setting change the time out to either 12 or 15 (10 default).
delay TVServer finding cards 20 seconds, then enable Powerscheduler and powerscheduler client plugins, do not set the reinitiliase tuner to enabled.
Download PowerDVD trial, this will allow you to use their hardware enabled codec.
In TVServer config\epg setting change the time out to either 12 or 15 (10 default).
delay TVServer finding cards 20 seconds, then...
Windows Version: Windows XP (SP3)
[Motherboard: Gigabyte GA-MA78GPM-DS2H
1. TV Card: Hauppauge Win Nova T 500
Hiya,
I've just...
I need help please
I can't select the recording and timeshift folder, the tv server engine hangs.
Anybody with the same problem?
I need help please
I can't select the recording and timeshift folder, the tv server engine hangs.
Anybody with the same problem?
I need help please
I can't select the recording and timeshift folder, the tv server engine hangs.
Anybody with the same problem?
Anytime I try to schedule recordings for shows that are 15 minutes long I get confilcts with the show before it, but only if the show before it is 30 minutes long. I'm not sure if shows that are longer than 30 minutes confilct the same way.
Example, show A starts at 12:00 and ends at 12:30 and show B starts at 12:30 and ends at...
Anytime I try to schedule recordings for shows that are 15 minutes long I get confilcts with the show before it, but only if the...
Anytime I try to schedule recordings for shows that are 15 minutes long I get confilcts with the show before it, but only if the...
yeh it is the only real problem im having with media portal right now, what tv tuner are you using?
I am thinking of trying a different tuner.
yeh it is the only real problem im having with media portal right now, what tv tuner are you using?
I am thinking of trying a...
Ok still no suggestions but I will update this thread again with a RC4 log, the issue still remains.
TV-Server Version: RC3\RC4...
New logs attached
thanks
New logs attached
thanks
Hi,
Does anyone know how to get the Azureware AD-TU200 to work under media portal as
It says not tv cards installed even...
I did indeed upgrade to 5.0.0.19, which still didn't work at first. I had to actually un-install the drivers completely using device manager, reboot and the reinstall the 5.0.0.19 drivers from scratch. After that, all was well. Yippeee.
I did indeed upgrade to 5.0.0.19, which still didn't work at first. I had to actually un-install the drivers completely using...
TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: Blue Two (wide)
Windows Version: Visa x86 SP1
CPU Type: AMD X2...