HVR - 2200 Support (1 Viewer)

[guytpetj]

webstream card is not a radio you can tune, it's a card that will allow you to play internet radio streams. for which you have to enter the url's of the internet radio channel under the radio configuration.

Once the webstream card is removed under the hybrid card configuration, you should be able to tune radio channels on analog card 1 or 2.

 

[Sadlo]

That's the same problem again. When I try to access Analog card, Media portal configuration is freezing and not responding. When I leave it for few minutes, I got the same message like on Webstream card.
Thanks ...

 

[Shivian]

I just want to clarify because I haven't gotten this configured properly myself. The HVR-2200 has dual digital and analogue but from what I've read, it supports dual digital OR dual analogue and not a combination of both.

Does that mean that you setup a group with BOTH digital and then another with BOTH analogue? Or do you do it as Sadlo has in his earlier post?

Cheers,
S

 

[noonereallycares]

I just want to clarify because I haven't gotten this configured properly myself. The HVR-2200 has dual digital and analogue but from what I've read, it supports dual digital OR dual analogue and not a combination of both.

Does that mean that you setup a group with BOTH digital and then another with BOTH analogue? Or do you do it as Sadlo has in his earlier post?

Cheers,
S

I thought you created two groups, each with a combination of 1 digital and 1 analogue tuner. This means that each physical tuner can be used to tune a single input, but that input can be either analogue or digital.

In my case, I simply disabled the analogue tuners and avoided any problems that they may cause. It means no FM radio, but I still have my PVR 150 for that.

 

[Shivian]

Ahh ok cool. Thanks.

 

[No1Daemon]

How do I alter the tuning parameters/freuencies for this card?

Once I find them of course. At the moment the only option is New Zealand Auckland (tests) but there are more options now.

Thanks

 

[Shivian]

How do I alter the tuning parameters/freuencies for this card?

Just use the TV server configuration.

 

[mcraenz]

I've got a HVR2200 and DVB-T works perfectly but TV Server hangs when trying to scan analog :-(

 

[rafagsi]

Hvr-2200 Analog Problem

I've got the same problem, in my case I want to use the analog tuners for use the analog inputs of my New Scaleo EVI (Scart, Components, etc...) Please, Anyone can help us?

 

[Bram]

I haven't found a single TV program that allows me to use the Analog part of this card. What drivers are you all using? I'm running XP SP3 and I've downloaded my drivers from the official site. All is installed with no problems. The two digital tuners and the analog tuners are showing in the TV server (1.0 RC1, latest SVN) but the card is not showing in the hybrid cards tab, but I'm pretty sure this is a hybrid card.

Ik have the dvbfix installed

I can't scan for channels the scanning progress never starts/locks up. If I input the channels manually I can assign the channels to the analog tuners, but when I start timeshifting in the TV-server configuration I get a "Unknown error occured" after a while, or the configuration app completely locks up and I have to force it to quit. I have the DVB-T tuners disabled. This is my error.log from the TV-server....

2008-05-04 01:31:07.046875 [TVService]: RemoteControl: Error getting server Instance - Requested Service not found
2008-05-04 01:31:45.687500 [9]: Exception   :System.Exception: No analog audio/video pins found
   at TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
2008-05-04 01:31:45.687500 [9]: Exception   :No analog audio/video pins found
2008-05-04 01:31:45.687500 [9]:   site      :Void BuildGraph()
2008-05-04 01:31:45.703125 [9]:   source    :TVLibrary
2008-05-04 01:31:45.703125 [9]:   stacktrace:   at TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
2008-05-04 01:31:45.703125 [9]: Exception   :System.Exception: No analog audio/video pins found
   at TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
   at TvLibrary.Implementations.Analog.TvCardAnalog.Tune(Int32 subChannelId, IChannel channel)
   at TvService.CardTuner.Tune(User& user, IChannel channel, Int32 idChannel)
2008-05-04 01:31:45.703125 [9]: Exception   :No analog audio/video pins found
2008-05-04 01:31:45.703125 [9]:   site      :Void BuildGraph()
2008-05-04 01:31:45.703125 [9]:   source    :TVLibrary
2008-05-04 01:31:45.703125 [9]:   stacktrace:   at TvLibrary.Implementations.Analog.TvCardAnalog.BuildGraph()
   at TvLibrary.Implementations.Analog.TvCardAnalog.Tune(Int32 subChannelId, IChannel channel)
   at TvService.CardTuner.Tune(User& user, IChannel channel, Int32 idChannel)