iPimp - Issues with New Zealand recordings... (1 Viewer)

Edwood

Portal Pro
September 16, 2008
64
2
Home Country
New Zealand New Zealand
...and don't forget to be a team player, and post your command line when you get it all working sweetly :)
 

TommySharp

MP Donator
  • Premium Supporter
  • January 15, 2007
    322
    7
    45
    Auckland
    Home Country
    New Zealand New Zealand
    Well I've been using the following manual settings for a little while now...

    -i "{0}" -t 1 -c 1 -o "{1}" -f mp4 -w 720 --loose-anamorphic --detelecine --decomb -e x264 -b 500 -r 29.97 -a 1 -E faac -6 auto -R 48 -B 160 -D 0.0 -x b-adapt=2:rc-lookahead=50 -v 1

    File sizes are a lot smaller now which is great! An episode of Home and Away (for the GF!) is about 190mb now which is perfect for transferring to the phone for watching later. This is down from the original 3.2gb TS file.

    Only issue is now I'm pretty sure that it's taking longer to transcode than with the standard settings. I've got a core 2 quad Q8400 and it's taking about an hour and a half to transcode said episode of home and away.

    I'll switch it back to the standard iphone preset and see how long that takes to transcode.

    UPDATE.... Looks like my custom settings were quicker???

    With my custom settings....
    Show = Home and Away 29/Jul
    Length = 40 minutes
    Avg Bitrate = 12000kbps
    Frame Size = 1920x1080
    Original Size = 3.15GB
    Encode Bitrate = 500kbps
    Encode Size = 720x416
    Resulting Size = 190MB
    Time to transcode = 1.50 hours

    Standard iPhone settings
    Show = Home and Away 30/Jul
    Length = 40 minutes
    Avg Bitrate = 12000kbps
    Frame Size = 1920x1080
    Original Size = 3.15GB
    Encode Bitrate = 645kbps
    Encode Size = 480x272
    Resulting Size = 227MB
    Time to transcode = 40 minutes

    So looks like standard iPimp iPhone settings give me a slightly bigger file but in about half the time which is good I suppose..... However the files sizes are much smaller than they used to be with the same iPhone settings so maybe a HandBrake update has changed this?
     

    TommySharp

    MP Donator
  • Premium Supporter
  • January 15, 2007
    322
    7
    45
    Auckland
    Home Country
    New Zealand New Zealand
    Just looking at some of my resulting transcodes and some of them are still above 1000kbps which is way high for the iPhone I think.....

    Will have to keep playing to see if I can get this constant so it is always 500kbps....
     

    Users who are viewing this thread

    Similar threads

    Fixed, I think. Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that these were never part of the install package itself, but rather downloaded during the install, and that link no longer exists. Shame that the installer doesn't indicate this. Last time when I installed the...
    Fixed, I think. Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that...
    Hi all, I've recently retired my MP2 setup for my main HTPC and gone back to separates, but I wanted to retain the ability to play...
    Replies
    4
    Views
    703
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback. If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo. I have...
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select...
    Not sure if this a a bug/config/settings problem. I am running a media portal 2.5 server with 2.41 client but it seems I get the...
    Replies
    1
    Views
    902
    Thanks for the update on this. I should have searched before posting, always assume it is something I have done wrong.
    Thanks for the update on this. I should have searched before posting, always assume it is something I have done wrong.
    Hi All, I have a strange one. I recently added 2 new TV series to my setup and they are not being correctly identified in the...
    Replies
    2
    Views
    294
    Got a reply from SD ... "Looks like your last successful download was on 5/23. On 5/24 for some reason we received 194 connections between 10:54 and 11:05 triggering a denial of service attack ban. The logs show it was lifted on 5/25, but I still see the entry in iptables. I reset fail2ban and hopefully you're working again." Weird...
    Got a reply from SD ... "Looks like your last successful download was on 5/23. On 5/24 for some reason we received 194...
    I'm using MediaPortal 1.38.1 x64 and have an SD-DD lineup account. In the last week, I have not been able to update my EPG, and...
    Replies
    3
    Views
    614
    Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall rules were set to Public. I couldn't connect to the new TV Server from my old single-seat installation running 32-bit until I changed all MP-related firewall rules on the new machine to Private. Before I did...
    Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall...
    Server and client on modern uptodate Windows 11 desktop. Software is Server and Client version x86 1.38.003 Remote client on...
    Replies
    26
    Views
    3K
    Top Bottom