Completed whats under the hood ;) (1 Viewer)

A

Anonymous

Guest
Just finished my new htpc...got most of this 2nd hand so it didn't cost too much :).

-Sempron 2800+ (754 pin so it has sse2, cool'n'quiet and all that)
-Asus K8S-MX (contains all the usual bell's and whistles, including S/PDIF which i'm using for sound...and it even has a pci-e x1!)
-512 Generic DDR 3200
-DVICO HDTV lite. inc remote.
-Radeon 9000pro (had it spare, not gonna use this for gaming atm so this works fine, i also like the ati tv-out more than the nvidia for some reason)
-Dlink Wireless DWL-530 (a/b/g, and the dlink 108mps thingy)
-Coolermaster ATC-620C-BX1. (very nice, cheap case)
-8x Pioneer Slot DVD-ROM (no burner in here yet :()
- 1 x 120gig Seagate (PATA)
- 2 x 200gig WD (SATA)

more to come...
 
G

gforce

Guest
AMD Athlon X2 4600+
Asus A8N-SLI
1024MB Corsair Ram
10x 250Gb HDDs Raid 0
Dual DViCO Tuners
Happauage Nova-T
ATI Radeon x600PRO HDTV
 

chili

Portal Pro
September 20, 2004
339
0
somewhere in the bowels of Texas
DFI NFII ULTRA-AL Motherboard
AthlonXP 2200+ Processor
COOLER MASTER X Dream II Silent Heatsink/Fan
Radeon 9550 128mb video with DVI out
Philips Ultimate Edge 24-Bit 6-Channel Sound
768mb Corsair PC3200 DDR Memory
80gb Western Digital SATA Hard Drive
8x Internal DVD±R/±RW/CD-RW Drive
Cooler Master Cavalier II Case
Logitech MediaPlay Wireless Mouse
BTC Wireless Keyboard/Joystick Mouse
MS MCE Remote
Media Portal (of course)

HTPC.jpg


no TV stuff yet, but it's coming...
 
A

Anonymous

Guest
Ok, here's mine:

Dign HV5 + Remote
AMD Athlon XP 2500 @ 1420Mhz
Zalman 6000alcu
Gigabyte GA-7N400 Pro (Onboard LAN & Optical/Coax SPDIF)
2*256Mbyte PC3200 DDR
Sapphire Radeon X700
Samsung Spinpoint 160Gbyte (5400rpm)
Samsung DVD
Hauppauge PVR250
Terratec Cinergy 1200 DVB-C (If i get it working)
BTC Wireless Keyboard/Joystick Mouse (Same as above :D )
 

Flerbizky

Portal Pro
July 18, 2005
104
0
53
Copenhagen
Home Country
Denmark Denmark
Current setup :


  • Antec Overture II cabinet - Internally Modded.
    MSI K8N Neo4.
    XP64 3000 @ 36 degrees celsius w. Cool'n'Quiet.
    Zalman CNSP7000Cu with blue leds :)
    2 x 512Mb Kingston PC4000.
    Leadtek passively cooled 6600.
    250Gb HDD - can't remember the name - Loosely mounted in rubber fittings.
    Hauppauge WinTV/PVR150.
    SoundGraph iMON Inside w. remote - it R broketh with the MSI board :?
    Lite On 16x DVD burner - I LOVE Nero Drivespeed :p
    1 extra 9dB Papst fan blowing at the Graphics card and Northbridge.

Still too noisy though.. It's a very slight hum which I suspect is the PSU. Haven't torn that apart yet though..
 

FiDo

Portal Member
February 28, 2005
7
0
Stockholm
Home Country
Sweden Sweden
Abit IC7-G Motherboard
Intel Northwood P4 2.8GHz @ 14x250MHz=3.5GHz CPU
2x512Mb of OCz EL Platinum rev.2 @ 250MHz DDR Dual channel RAM
XFX 6600GT AGP Graphics card
2x160Gb Seagate SATA disks in Raid0
NEC 3510 DVD +/- R/RW DL DVD
OCz Modstream 480W PSU
Twinhan DTV DVB+CI TV Card
Unknown Floppy drive

2x20 PLED Display

Thermalright XP120 with Papst 120mm Fan for the CPU
Zalman XXXX CuAl cooler for the Graphics
Unknown passive Northbridge cooler
2 Papst 9dB 80mm case fans

Silverstone LC01B Case with MagicFleece Noise dampening

MS MCE Remote (EU version)
MS Bluetooth keyboard and mouse

Sanyo PLV-Z2 Projector (DVI-D or VGA or Component connection still trying to figure out which one to use).
 

thinksnow

New Member
January 29, 2005
52
1
Columbus, Ohio
Home Country
United States of America United States of America
My HTPC has the following:
Case: Antec SLK3700-BQE
PSU: Fortron Source Silent Solution 400w
Motherboard: MSI 865PE-Neo2
Processor: Intel P4 2.8E Prescott 800MHz FSB 1MB L2 Cache
Hard Drives: 3x Western Digital SATA 7200 RPM 80 GB
Memory: 1.5GB GeIL PC3200 DDR (2x 512 + 2x 256, dual-dual channel)
Video Card: nVidia GeForce Ti4200
Sound Card: (onboard 5.1, S/PDIF optical out to JVC receiver & Sherwood surrounds + Polk 12 sub.)
Monitor: 50 Grand WEGAâ„¢ 3LCD Rear Projection HDTV KDF-E50A10
CD/DVD drives: NEC Black IDE DVD Burner Model ND-3540A 16x dual-format, dual-layer
PVR Cards: standard TV - Hauppauge WinTV PVR-250 & HDTV - DVico Fusion5 Lite

Networked in the basement:
A random case holding a MSI-K7N2
AMD Athlon 2200+
512MB GeIL PC3200
Adaptec SCSI Card 29160
connected to the ULTRATrak RAID-5 (SATA version shown, I've got the P-ATA/IDE) housing
5x Maxtor Ultra 200 GB w/ 8MB buffer
 

Users who are viewing this thread

Similar threads

I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV...
Hi everyone, I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
Replies
8
Views
1K
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab: The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server...
I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each) Is there...
Replies
1
Views
816
Well, all that remains is to find someone who will add this render if it is a render.
Well, all that remains is to find someone who will add this render if it is a render.
Are there plans to support other video renderers? MadVR got added a while ago, but this a 'hardcoded' selection in the...
Replies
23
Views
9K
That screen is generated by the file "MyVideo.xml", but it uses various other files too. When the list on the right is a list of episodes, the area in the middle contains the programme information for the episode that has the focus. In your screen shot, the list on the right is a list of folders. You could fill the area in the...
That screen is generated by the file "MyVideo.xml", but it uses various other files too. When the list on the right is a list of...
Can someone please assist me in the file name and location of which XML controls this screen. I want to create an additional box...
Replies
1
Views
1K
Are the media/video folders on the Mint host?
Are the media/video folders on the Mint host?
I've used Mediaportal for years on a Windows Host with restricted online-access. Lately I reinstalled...
Replies
1
Views
1K
Top Bottom