Just finished my new htpc...got most of this 2nd hand so it didn't cost too much .
-Sempron 2800+ (754 pin so it has sse2, cool'n'quiet and all that)
-Asus K8S-MX (contains all the usual bell's and whistles, including S/PDIF which i'm using for sound...and it even has a pci-e x1!)
-512 Generic DDR 3200
-DVICO HDTV lite. inc remote.
-Radeon 9000pro (had it spare, not gonna use this for gaming atm so this works fine, i also like the ati tv-out more than the nvidia for some reason)
-Dlink Wireless DWL-530 (a/b/g, and the dlink 108mps thingy)
-Coolermaster ATC-620C-BX1. (very nice, cheap case)
-8x Pioneer Slot DVD-ROM (no burner in here yet )
- 1 x 120gig Seagate (PATA)
- 2 x 200gig WD (SATA)
DFI NFII ULTRA-AL Motherboard
AthlonXP 2200+ Processor
COOLER MASTER X Dream II Silent Heatsink/Fan
Radeon 9550 128mb video with DVI out
Philips Ultimate Edge 24-Bit 6-Channel Sound
768mb Corsair PC3200 DDR Memory
80gb Western Digital SATA Hard Drive
8x Internal DVD±R/±RW/CD-RW Drive
Cooler Master Cavalier II Case
Logitech MediaPlay Wireless Mouse
BTC Wireless Keyboard/Joystick Mouse
MS MCE Remote
Media Portal (of course)
Antec Overture II cabinet - Internally Modded.
MSI K8N Neo4.
XP64 3000 @ 36 degrees celsius w. Cool'n'Quiet.
Zalman CNSP7000Cu with blue leds
2 x 512Mb Kingston PC4000.
Leadtek passively cooled 6600.
250Gb HDD - can't remember the name - Loosely mounted in rubber fittings.
Hauppauge WinTV/PVR150.
SoundGraph iMON Inside w. remote - it R broketh with the MSI board :?
Lite On 16x DVD burner - I LOVE Nero Drivespeed
1 extra 9dB Papst fan blowing at the Graphics card and Northbridge.
Still too noisy though.. It's a very slight hum which I suspect is the PSU. Haven't torn that apart yet though..
Abit IC7-G Motherboard
Intel Northwood P4 2.8GHz @ 14x250MHz=3.5GHz CPU
2x512Mb of OCz EL Platinum rev.2 @ 250MHz DDR Dual channel RAM
XFX 6600GT AGP Graphics card
2x160Gb Seagate SATA disks in Raid0
NEC 3510 DVD +/- R/RW DL DVD
OCz Modstream 480W PSU
Twinhan DTV DVB+CI TV Card
Unknown Floppy drive
2x20 PLED Display
Thermalright XP120 with Papst 120mm Fan for the CPU
Zalman XXXX CuAl cooler for the Graphics
Unknown passive Northbridge cooler
2 Papst 9dB 80mm case fans
Silverstone LC01B Case with MagicFleece Noise dampening
MS MCE Remote (EU version)
MS Bluetooth keyboard and mouse
Sanyo PLV-Z2 Projector (DVI-D or VGA or Component connection still trying to figure out which one to use).
Networked in the basement:
A random case holding a MSI-K7N2
AMD Athlon 2200+
512MB GeIL PC3200 Adaptec SCSI Card 29160
connected to the ULTRATrak RAID-5 (SATA version shown, I've got the P-ATA/IDE) housing 5x Maxtor Ultra 200 GB w/ 8MB buffer
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV...
Hi everyone,
I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab:
The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server...
I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each)
Is there...
That screen is generated by the file "MyVideo.xml", but it uses various other files too.
When the list on the right is a list of episodes, the area in the middle contains the programme information for the episode that has the focus.
In your screen shot, the list on the right is a list of folders. You could fill the area in the...
That screen is generated by the file "MyVideo.xml", but it uses various other files too.
When the list on the right is a list of...
Can someone please assist me in the file name and location of which XML controls this screen. I want to create an additional box...