General Support (433 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
Not possible with MP.
Not possible with MP.
When I'm viewing the list of all my videos, can it play a preview for each video instead of the film icon or whatever? For...
Replies
3
Views
1K
I too have the exact same problem and need some help. //KeLLoGs
I too have the exact same problem and need some help. //KeLLoGs
TV-Server Version: MediaPortal Version: 0.2.3.0 MediaPortal Skin: Project Mayhem III Windows Version: Vista Ultimate 64 CPU...
Replies
3
Views
1K
Any change in this? I dug up this thread when searching becuase Im still having the same issue.
Any change in this? I dug up this thread when searching becuase Im still having the same issue.
TV-Server Version: 05-20-2007 01-22h Revision 14669 MediaPortal Version: 05-20-2007 01-00h - Revision:14669 MediaPortal Skin...
Replies
5
Views
1K
Hello, thank you for the hint with EVR, that solved my problem ! I turned off EVR, activated VMR9 and hardware decoding in the Cyberlink PowerDVD7 codec. This gives a good picture with only around 6-8% CPU load. Thanks, Markus
Hello, thank you for the hint with EVR, that solved my problem ! I turned off EVR, activated VMR9 and hardware decoding in...
Hello, after struggling with the known issues with MP and the Xpress 1250 graphics chipset I decided to go for Vista 32...
Replies
5
Views
2K
Hi. I also had the f**king skips. They only occured when playing video (tv/video/series/...) in MP. Now, after disabling the mouse wheel with Ardamax and running it for half a week, I have to report that there are no more skips. Sometimes the cursor appears and the IMON display chnages for a short time, which shows me that MP...
Hi. I also had the f**king skips. They only occured when playing video (tv/video/series/...) in MP. Now, after disabling the...
I have searched the entire forum, but with no luck. Is it possible to turn off mouse support in MP completely? KRL
Replies
9
Views
3K
TV-Server Version: tvengine3-04-04-2008-Rev18550 MediaPortal Version: SVN 04-04-2008 Rev 18550 MediaPortal Skin: Blue Windows Version: Vista Ultimate 32 bit CPU Type: Core 2 Duo [Video Card: Nvidia 8600 GTS Video Card Driver: latest [1. TV Card: Haupagge Nova T 500 dual DVB-T I had no problems getting my Media Portal up and...
TV-Server Version: tvengine3-04-04-2008-Rev18550 MediaPortal Version: SVN 04-04-2008 Rev 18550 MediaPortal Skin: Blue Windows...
TV-Server Version: tvengine3-04-04-2008-Rev18550 MediaPortal Version: SVN 04-04-2008 Rev 18550 MediaPortal Skin: Blue Windows...
Replies
0
Views
1K
I had exactly the same problem with ADS Tech Dual TV Cardbus (PTV-331): ADS Tech The following solution worked for me finally: Editing the C:\..\MediaPortal\CaptureCardDefinitions.xml file from <capturecard commercialname="ADS-Tech Instant Dual TV DVB-T CardBus" capturename="713x BDA Digital Capture"...
I had exactly the same problem with ADS Tech Dual TV Cardbus (PTV-331): ADS Tech The following solution worked for me finally...
Hello, Here is my entire config (laptop) : CPU AMD Athlon 64 3200+ Memory 1 Go HDD 80 Go Graphic card : ATI Radeon Mobile...
Replies
2
Views
4K
Your info is a little limited. but let me try I am pretty sure it is not related to Mediaportal, but to the driver settings of your system When your TV is on, Mediaportal play music, right? I guess you have your TV connected to your sound system using the red/white stereo audio cables (or with 6 wires when having 5.1 audio)...
Your info is a little limited. but let me try I am pretty sure it is not related to Mediaportal, but to the driver settings of...
TV-Server Version: MediaPortal Version: 0.2.3.0 SVN MediaPortal Skin: Core Windows Version: XP MCE CPU Type: HDD: Memory...
Replies
2
Views
2K
MP1 MP2 COM Class / CLSID DE
TV-Server Version: MediaPortal Version: 2.3.0 MediaPortal Skin: Bluetwo wide Windows Version: XP SP2 CPU Type: Pentium 4 HT HDD: 320 GB Memory: 1.2 GB I'm getting this error when I try to open Configuration, what does that mean? I've uninstalled MediaPortal and installed no luck. Installed Framework 2.0, still the same. Log...
TV-Server Version: MediaPortal Version: 2.3.0 MediaPortal Skin: Bluetwo wide Windows Version: XP SP2 CPU Type: Pentium 4 HT...
TV-Server Version: MediaPortal Version: 2.3.0 MediaPortal Skin: Bluetwo wide Windows Version: XP SP2 CPU Type: Pentium 4 HT...
Replies
0
Views
859
Yes, you need to delete the "Groups"-line (press "D")
Yes, you need to delete the "Groups"-line (press "D")
I have had default view as LIST but now I would like to change it to FILMSTRIP. I have change this in the settings for any new...
Replies
5
Views
2K
the remote dont use a configuration tool. in the device manager windows detect the remote as a keyboard and that this the problem. its not possible to change the remote-code, that is the reason that i need another solution. i thing it gives two solution for this (or similiar) remotes: 1) Change Code in Mediaportal. Mediaportal...
the remote dont use a configuration tool. in the device manager windows detect the remote as a keyboard and that this the problem...
How can i disable the Combination ALT+ENTER in Mediaportal? i ve delete the Keymap.xml but MP make every time if i press this...
Replies
4
Views
2K
Have you got exclusive mode set in vmr9, MP config\directshow filters\video renderer settings, try changing.
Have you got exclusive mode set in vmr9, MP config\directshow filters\video renderer settings, try changing.
TV-Server Version: MediaPortal Version: 0.2.3.0 MediaPortal Skin: Windows Version: xp sp2 CPU Type: amd x64 HDD: sata 750g...
Replies
1
Views
1K
MP1 MP2 Freeview Trouble DE
http://www.freecom.com/ecDrivers.asp?form1=true May help get driver
http://www.freecom.com/ecDrivers.asp?form1=true May help get driver
Hello any,got this freecom freeview usb,but it wont work on vista ? installs ok but keeps asking for drivers ? any help for a...
Replies
1
Views
853
to the OP, you could also just set up a share with full access to the Username that you have MP running under. Then nothing changes for anyone else (password still required) but for MP they get automatic access. then again, I don't know much about Mac at all...
to the OP, you could also just set up a share with full access to the Username that you have MP running under. Then nothing...
Hello everyone! I love this program... i just set it up but i am getting SOOOOOOOOOOO frustrated trying to figure out how to...
Replies
7
Views
2K
Update: (just finished testing) 1) I found a way to eliminate some of the double keystrokes (on the MCE Remote). I added MediaPortal as an Application in the HIP config. And placed (remapped) a delay for the existings keystrokes. This seems to work. It is not quite perfect. But managable. Phunqe, thanks for the tip. This is quite...
Update: (just finished testing) 1) I found a way to eliminate some of the double keystrokes (on the MCE Remote). I added...
TV-Server Version: not in use MediaPortal Version: 0.2.3.0 MediaPortal Skin: BlueTwo 0.2.3.0 Windows Version: Windows XP...
Replies
12
Views
2K
Yes! Thank you both! :D The video problem was solved by setting PPT back to 96. And the "Play DVD" plugin was disabled.. I must have accidentaly turned it off or something.
Yes! Thank you both! :D The video problem was solved by setting PPT back to 96. And the "Play DVD" plugin was disabled.. I...
TV-Server Version: Not installed MediaPortal Version: 0.2.3.0 SVN Build 18560 MediaPortal Skin: BlueTwo Windows Version: Windows...
Replies
5
Views
3K
MP1 MP2 Two entries in Recorded TV (1 Viewer) DE
Thanks for your response.... I have mine setup to record to the root directory on my new HDD so this may very well solve the problem.. unfortunately I am overseas for work until the weekend but will definately make the change and see if this works... Thanks for the suggestions.
Thanks for your response.... I have mine setup to record to the root directory on my new HDD so this may very well solve the...
TV-Server Version: MediaPortal Version: 0.2.3 MediaPortal Skin: Cface Windows Version: XP Home SP2 CPU Type: AMD Sempron 3000+...
Replies
10
Views
2K
NVIDIA Standby Problem Hi, I had a similar problem with a XPC Shuttle system. The problem I found was that the on board NVIDIA Power Management driver had to be updated and the problem went away. See if there is a more upto date driver for your motherboard hardware??? Hope this helps
NVIDIA Standby Problem Hi, I had a similar problem with a XPC Shuttle system. The problem I found was that the on board...
TV-Server Version: MediaPortal Version: 0.2.3.0 MediaPortal Skin: Blue Two Wide Windows Version: XP PRO SP2 CPU Type: Intel...
Replies
2
Views
1K
I can't remember exactly why, but I understand that using WMP vis is not a simple process. I think it took quite a bit of work to get Alchemy to work. Also, though, if you disable the Bass player I *think* then it will use the default WMP vis, but the BASS player is a lot better than the windows one.
I can't remember exactly why, but I understand that using WMP vis is not a simple process. I think it took quite a bit of work to...
Hi, in the visualisations setting under music, I'm only able to select the Alchemy visualisation in the settings, when using the...
Replies
4
Views
1K
NVM fixed it. I'm sorry to bump an old thread, but now I'm having this problem too. I just reinstalled my OS onto a single HD from my Raid0 drives to free up a Sata port for my new Blu-ray rom drive. When I was installing the software for my HDHomerun, I noticed there was an updated firmware on their site, which I installed...
NVM fixed it. I'm sorry to bump an old thread, but now I'm having this problem too. I just reinstalled my OS onto a single HD...
TV-Server Version: N/A MediaPortal Version: 0.2.3.0 RC1 svn--09-03-2007--01-31-Rev15736 MediaPortal Skin: BlueTwo Windows...
Replies
14
Views
4K
As I just said in another thread: So far I have had most sucess with this link: https://forum.team-mediaportal.com/general-support-51/cyberlink-powercolor-remote-mapping-mediaportal-10034/ Not using it now, so I don't know if there is som e new issues.
As I just said in another thread: So far I have had most sucess with this link...
Hi everyone, I'm new to this forum, so I hope I won't be writing a all-known question, even tough I hardly doubt that. I was...
Replies
7
Views
6K
So far I have had most sucess with this link: https://forum.team-mediaportal.com/general-support-51/cyberlink-powercolor-remote-mapping-mediaportal-10034/ Not using it now, so I don't know if there is som e new issues.
So far I have had most sucess with this link...
I need Help with this bloody remote control. I spend almost a month and moved a little bit. I have Media portal and finally...
Replies
1
Views
1K
Whenever installing SVN you get asked if and given the procedures on how to make a backup Also this, from level20peon: MySQL script for making re-installation of TV-Server a cakewalk - MediaPortal Forum how to save configuration of mediaportal - MediaPortal Forum
Whenever installing SVN you get asked if and given the procedures on how to make a backup Also this, from level20peon: MySQL...
TV-Server Version: MediaPortal Version: 0.2.3 MediaPortal Skin: blue two Windows Version: Windows XP SP2 CPU Type: intel...
Replies
2
Views
5K
Hm okay. How come that it doesn't happend all the time? Or when you turn on a playlist of videos it can go on forever without haning. :S
Hm okay. How come that it doesn't happend all the time? Or when you turn on a playlist of videos it can go on forever without...
TV-Server Version: MediaPortal Version: 0.2.3.0 MediaPortal Skin: BlueTwo Windows Version: Windows XP Pro SP2 CPU Type: AMD...
Replies
3
Views
1K
Anyone any ideas?
Anyone any ideas?
Hi folks Loving the application, but, would like to have my Movies listed, by ignoring 'The' in the Title while sorting, but...
Replies
1
Views
933
MediaPortal Version: 0.2.3 Windows Version: Vista Pre SP1 CPU Type: Intel Dual Core something Motherboard: Dell System... Video Card: ati hd 2400 Video Card Driver: 8.3 i think Remote: MS MCE I use the MCE remote to set the pc to sleep when I'm not using it. Sometimes after waking it up, the tv doesn't see that the pc is on...
MediaPortal Version: 0.2.3 Windows Version: Vista Pre SP1 CPU Type: Intel Dual Core something Motherboard: Dell System... Video...
MediaPortal Version: 0.2.3 Windows Version: Vista Pre SP1 CPU Type: Intel Dual Core something Motherboard: Dell System... Video...
Replies
0
Views
1K
TV-Server Version: TV Engine 3 Buil 03-04-2008 MediaPortal Version: 0.2.3.0 MediaPortal Skin: Windows Version: Vista Home Premium SP1 CPU Type: Intel Duo Core 2.4Ghz HDD: Seagate 200GB Memory: 2GB Amicore Motherboard: Asus P5k SE Motherboard Chipset: 775 Motherboard Bios: Asus Video Card: nVidia 7300 GT Video Card Driver...
TV-Server Version: TV Engine 3 Buil 03-04-2008 MediaPortal Version: 0.2.3.0 MediaPortal Skin: Windows Version: Vista Home...
TV-Server Version: TV Engine 3 Buil 03-04-2008 MediaPortal Version: 0.2.3.0 MediaPortal Skin: Windows Version: Vista Home...
Replies
0
Views
2K
MP relies on some items that were not introduced untill directx9 so, yes that may be your problem
MP relies on some items that were not introduced untill directx9 so, yes that may be your problem
N/A: 0.2.3.0: Default: XP Home SP2 current to 03-04-08: p4 1.7ghz 478?: 80gb samsung i think: 256mb: Laptop IPC 8170...
Replies
3
Views
1K
*push*
*push*
TV-Server Version: MediaPortal Version: 2.3.0 MediaPortal Skin: BlueTwo Windows Version: Windows XP SP2 CPU Type: AMD Athlon 64...
Replies
1
Views
1K
*push*
*push*
TV-Server Version: MediaPortal Version: 2.3.0 latest SVN MediaPortal Skin: BlueTwo Windows Version: Windows XP SP2 CPU Type...
Replies
1
Views
2K
Top Bottom