General Support (950 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
MCE Remove/Receiver Ok - my MediaCenter remote showed up from RadioShack. I couldn't get XP Home to find any drivers, but after getting them from MP's site all was well. The remote did activate my XBOX360, which might be an issue... And I haven't had a chance to then see if the 360 remote works with the MCE receiver. The...
MCE Remove/Receiver Ok - my MediaCenter remote showed up from RadioShack. I couldn't get XP Home to find any drivers, but after...
If my laptop has an IR reader/port on the front - will an XBOX 360 remote work with MediaPortal?
Replies
9
Views
2K
0.2.0.4 seems to be stable for me (with my config anyway)
0.2.0.4 seems to be stable for me (with my config anyway)
Area: Media Portal Program MediaPortal Version: 0.2.0.4 (2006-08-11) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
8
Views
4K
Have just installed MP, when I click on record the aiudio seems to go out of synch slightly, is there any obvious solution to this please? When playing back the recorded clip it is also out of synch.
Have just installed MP, when I click on record the aiudio seems to go out of synch slightly, is there any obvious solution to this...
Have just installed MP, when I click on record the aiudio seems to go out of synch slightly, is there any obvious solution to this...
Replies
0
Views
826
:lol:
:lol:
I don't want a song to start playing immediately when I add it to playlist. I need to arrange the playlist first. If there is no...
Replies
11
Views
2K
Correct. The output can't render stuff, only output TV using WinTV.
Correct. The output can't render stuff, only output TV using WinTV.
1. when playing videos in 'my videos' the video signal is not being outputted to the svideo out on my hauppauge pvr 350 tv card. is...
Replies
3
Views
1K
What I would do is log into zap2it and check to see what they have. I do all of my setup and editing of the channels on zap2it. I have noticed that sometimes they have 2 channels listed for same number. SO 61 is GOV005 but it also has a listing for 61 being CNN... so I just uncheck GOV005 and it works just fine. I would doubled...
What I would do is log into zap2it and check to see what they have. I do all of my setup and editing of the channels on zap2it...
Am useing the zap2it labs to get my tv guide stuff on my computer on media portal and for some reason it shows some chanles and...
Replies
1
Views
1K
that's what i meant (-;
that's what i meant (-;
Area: Media Portal Program MediaPortal Version: 0.2.0.4 (2006-08-11) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
5
Views
2K
MP1 MP2 Avermedia M115s DE
I install the last version of MediaPortal in my Vaio AR11M with XP Professional SP2. Everything work fine but I can tune my Avermedia Hybrid TV card M115S only in digital when I add the analog one I see this message "Unable to create the graph for this device!!" and no tune page appear. Any idea Guys? Thanks a lot
I install the last version of MediaPortal in my Vaio AR11M with XP Professional SP2. Everything work fine but I can tune my...
I install the last version of MediaPortal in my Vaio AR11M with XP Professional SP2. Everything work fine but I can tune my...
Replies
0
Views
2K
Even better! :mrgreen:
Even better! :mrgreen:
Did this disappear silently? -k
Replies
7
Views
1K
Hi, Adding support for different cards is impossible, unless the vendor has released some example code to control their tvcard or make their SDK available to the team. Then still someone has to step up and implement it in MP of course. Without the necessary hardware (tvcard, switch and multi-lnb dish) it's difficult to implement...
Hi, Adding support for different cards is impossible, unless the vendor has released some example code to control their tvcard...
Area: Media Portal Program MP Version: MP Release 0.2.0.0 with stable update 0.2.0.3 Skin: MCE Windows Version: MS Windows XP...
Replies
19
Views
4K
Re: going slightly off track No, there isn't.
Re: going slightly off track No, there isn't.
Hi, i want to learn a bit more about remote config because i want to be able to set background as fullscreen video as default...
Replies
3
Views
1K
MP1 MP2 Output folder DE
http://wiki.team-mediaportal.com/FrequentlyAskedQuestions#head-167474d917d3ef90188237ca060d58dfc15a6329 try the above link
http://wiki.team-mediaportal.com/FrequentlyAskedQuestions#head-167474d917d3ef90188237ca060d58dfc15a6329 try the above link
Hey guys I just got my video caputre card and i have to say i love it and ur program but 1 thing i cant seem to find the place to...
Replies
1
Views
690
I use direct entry of numbers with no problem to change channel.
I use direct entry of numbers with no problem to change channel.
Hello all, and a big thanks to everyone that helped make Media Portal such a great product I am truly amazed at all the things my...
Replies
2
Views
1K
After playing around i found that one (or more) of mediaportals files had gone currupt ive replaced the whole folder with a backup and its working fine now.
After playing around i found that one (or more) of mediaportals files had gone currupt ive replaced the whole folder with a backup...
Mediaportal had been acting funny all day (i would select one song and the one after would play) and about an hour ago it just died...
Replies
1
Views
840
Hi, i got the same problem on my brother's htpc. In MP setup there are some short examples for configuring winlirc to use with MP, but i really don't understand it. Winlirc works fine with delivered dvbviewer. Do i need girder or something to get a working interface? Thanks Sebastian
Hi, i got the same problem on my brother's htpc. In MP setup there are some short examples for configuring winlirc to use...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-03-18) MediaPortal Skin: Razor Windows Version: Windows XP (SP2)...
Replies
1
Views
1K
ok i see, well I guess, i'lltry to if I can get a new set of remote+receiver that are smaller and actually run MP
ok i see, well I guess, i'lltry to if I can get a new set of remote+receiver that are smaller and actually run MP
Just a little word to let you know that I was able to use the Infrared receiver and remote control of WindowsMediaCenter without...
Replies
2
Views
1K
Interesting. I think I've fixed my issue. I was searching the site trying to find out what VMR9 was, and came across this thread. After browsing past the initial loooong template entry, I found this comment from Taipan: I suggest that you stick with the MediaPortal supplied video decoders, at least until you get this working...
Interesting. I think I've fixed my issue. I was searching the site trying to find out what VMR9 was, and came across this...
Reposting my problem with MP: Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: BlueTwo...
Replies
6
Views
3K
edit: this problem solved, othe problem came up. this post can be deleted, dunno how?
edit: this problem solved, othe problem came up. this post can be deleted, dunno how?
edit: this problem solved, othe problem came up. this post can be deleted, dunno how?
Replies
0
Views
2K
*UP*
*UP*
Ok, I did lots of searching but nothing helped (this is the closest i got, but I cant "browse" my CD from MP - and what is "shares"...
Replies
9
Views
1K
MP1 MP2 Hanging on directx (1 Viewer) DE
When it starts with twindows it starts ok but if I switch Media Portal of and then try to restart it it hangs on loading directx any ideas? Thank you
When it starts with twindows it starts ok but if I switch Media Portal of and then try to restart it it hangs on loading directx...
When it starts with twindows it starts ok but if I switch Media Portal of and then try to restart it it hangs on loading directx...
Replies
0
Views
882
If it happens with all skins (even after cleaning out the packagedgfx files), then Id be looking elsewhere. Try new video card drivers, give the system a full memtest run and worst case try a different video card temporarily.
If it happens with all skins (even after cleaning out the packagedgfx files), then Id be looking elsewhere. Try new video card...
Hi. I just installed mediaportal on my HTPC - AMD 3200, 1Gig RAM, NVidia Geforce 6150 IGP, 81cm LCD Panel @ 1280x768 16:9, XP...
Replies
1
Views
1K
I could still open the .exe with 7-zip, open the .msi with 7-zip and extract : Microsoft_mshtml_dll_1_____X86.3643236F_FC70_11D3_A536_0090278A1BB8 and rename to Microsoft.mshtml.dll :D Should do the trick (if not I'm really sorry), and give your broadband connection some free time to download other things ^_^
I could still open the .exe with 7-zip, open the .msi with 7-zip and extract ...
Not really a bug, but a packaging dependency. Utils is now dependent on Microsoft.mshtml.dll which is not shipped with Visual C#...
Replies
5
Views
2K
i got this working. i have an intel chipset. Picture and sound comes through ok. Not a great PQ. Especially the colors are so bad when using the CVSB connection compared to the plain AV connector. Anyway it will not be a good solution for me unless somemone knows of a way to map the channel change from the Sat Receiver to my...
i got this working. i have an intel chipset. Picture and sound comes through ok. Not a great PQ. Especially the colors are...
Hello, i know this has been asked and resolved quite a few times in the past. I have search the forums and looked for possible...
Replies
2
Views
2K
ah, excellent - works brilliantly for me :) Thanks for the tip! .t8
ah, excellent - works brilliantly for me :) Thanks for the tip! .t8
Hi, First... what a great program!! I was having huge problems with MCE with my Dual Tuners... Media Portal has been perfect...
Replies
2
Views
1K
When i play .ts files in MP it uses the MPEG-2 Demuxer according to graphedit, most files play fine, but i do have problems playing some files and it's very slow to start the movie or seek. If i rename the .ts to .mkv it uses the Haali media splitter, plays all the movies i tested and it's quicker to start and seek. Is there...
When i play .ts files in MP it uses the MPEG-2 Demuxer according to graphedit, most files play fine, but i do have problems playing...
When i play .ts files in MP it uses the MPEG-2 Demuxer according to graphedit, most files play fine, but i do have problems playing...
Replies
0
Views
941
i'm not sure about the t300, but it works with my t200a using the latest drivers.
i'm not sure about the t300, but it works with my t200a using the latest drivers.
Hi all, i was curious if the new version of MP works ok with the new videomate drivers? A while ago I updated to the newer...
Replies
2
Views
1K
Hi All, This seems the closest I've seen to a solution by the sounds of it. I've downloaded the Elecard Decoder, but where is this file DVRMS2XVID.cs??? I looked in the registry just in case the string value was in there, the CLSID is there, obviously due to the Elecard reg @ install, but the string strVideoCodecMoniker doesn't...
Hi All, This seems the closest I've seen to a solution by the sounds of it. I've downloaded the Elecard Decoder, but where is...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC4$CVS-08.06.2006-20:01:04,25 (2006-06-08) MediaPortal Skin: MCE...
Replies
17
Views
5K
hi, Please forgive this newbie question as I try to understand how to best use MP. I was wondering how it is possible to copy manually recorded shows from the "Recorded TV" section to archive them and rename them into the My Videos section. Can this be done from within MP? Is the standard format they are recorded in MPEG2...
hi, Please forgive this newbie question as I try to understand how to best use MP. I was wondering how it is possible to...
hi, Please forgive this newbie question as I try to understand how to best use MP. I was wondering how it is possible to...
Replies
0
Views
1K
my tv card is not supported.How i use media portal
my tv card is not supported.How i use media portal
my tv tuner card is not detecting by mediaportal.My card's chip set is philips.It is not detecting by media portal.when...
Replies
2
Views
1K
Anyone? I think I outputting the filter to ASIO instead of DirectSound/Wave would solve it, but I haven't found anything while googling for [insert any AC3-codec here] + ASIO. Any ideas there?
Anyone? I think I outputting the filter to ASIO instead of DirectSound/Wave would solve it, but I haven't found anything while...
Hi! I'm having issues with sound output in MediaPortals video player, and wondering if anyone can help... I'm running MP 2.04...
Replies
1
Views
1K
Top Bottom