Post problems you have when using MediaPortal,
or pre installation questions in here.
I read somewhere, that the long wait for change in channel may be due to bad signal reception.... Anyone else have this experience???
I read somewhere, that the long wait for change in channel may be due to bad signal reception.... Anyone else have this experience???
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-03-12)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
check out this thread re. dual DVB tuners in XP / MP: https://forum.team-mediaportal.com/viewtopic.php?t=11814&postdays=0&postorder=asc&highlight=dvb+fix&start=0
check out this thread re. dual DVB tuners in XP / MP...
Hi
I'm building a HTPC and planning to use MediaPortal.
Does anyone know if i should run into any prolems using the Terratec...
Or look at this thread for fix: https://forum.team-mediaportal.com/viewtopic.php?t=11814&postdays=0&postorder=asc&highlight=dvb+fix&start=0
Or look at this thread for fix...
Hi,
Using 0.2.0.0 RC2 with mediaportal-cvs-02-10-2006--01-05.rar.
anybody any ideas why if the CaptureCardDefinitions.xml...
never mind. I found it. I was looking in the media protal itself and not the setup program.
never mind. I found it. I was looking in the media protal itself and not the setup program.
Media Portal searched for all possible media files and indexed them but it has missed the folders where i keep most of my music and...
Hi, I have an irritating problem when using mediaportal with my irman / Harmony 525.
Scrolling is too slow; If I use anything lower than 250 ms in the mediaportal setup, MP scrolls two lines every time I push the remote. So I'm stuck with 250ms, which drives people crazy - They hammer the remote, resulting in MP scrolling long...
Hi, I have an irritating problem when using mediaportal with my irman / Harmony 525.
Scrolling is too slow; If I use anything...
Hi, I have an irritating problem when using mediaportal with my irman / Harmony 525.
Scrolling is too slow; If I use anything...
The encoder in not possible to install.
I get this error message:
Your wintv model type can not be determined, or appear sto be unsupported.
Please make sure your unit has the drivers installed, and is physically plugged in (If USB)
Debug info: Last_HW_Model=44354[/img]
The encoder in not possible to install.
I get this error message:
Your wintv model type can not be determined, or appear sto be...
Hello,
I can not get my tv-card to work with Media Portal. When I am going to search for the channels nothing is found.
Ive got...
Have you tried this? You can access this setting via MP Gui/plugins/settings/TV
Have you tried this? You can access this setting via MP Gui/plugins/settings/TV
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-02.07.2006- 1:19:11,65
(2006-07-02)
MediaPortal Skin: MCE...
I would simply ignore them at this point. Your reasoning and examples are more than concise. If I were you, I wouldn't even bother changing the merit value and leave it as MERIT_NORMAL. Let them solve their own problem - A problem you've been more than helpful on solving for them. :?
I would simply ignore them at this point. Your reasoning and examples are more than concise. If I were you, I wouldn't even bother...
I'm actually a GB-PVR user, but thought I should point out a problem I'm seeing lots of users encountering.
Every couple of days...
Re: Is there a way to download the tv guide info without ca
Yes.
The TV guide info is grabbed from the internet, not your cable connecton. You dont even need a TV tuner installed to get EPG (Electronic Program Guide) data.
Not saying Marcusb's link is bad, but since you live in the US, this link may be more user friendly...
Re: Is there a way to download the tv guide info without ca
Yes.
The TV guide info is grabbed from the internet, not your...
Is there a way to download the the tv guide info if you don't have cable hooked up to it? I apologize if this is a really dumb...
Select all languages for DVB EPG. I was having intermitent problems with EPG on DVB channels, for a week I wouldn't get any data, then it started to work and then not. A couple of weeks ago I selecter all languages and it's been working fine since them (fingers crossed :) ). But I suspect that, at least in Spain, DVB EPG isn't...
Select all languages for DVB EPG. I was having intermitent problems with EPG on DVB channels, for a week I wouldn't get any data...
Area: Media Portal Program
MP Version: v 0.2 RC4
Skin: default
Windows Version: XP Pro SP2
CPU Type: Intel Celeron 2.8GHz...
"Find coverart" is only available in the shares view so it's by design. When you switch to the "Artist" view you're in a database view.
Steve
"Find coverart" is only available in the shares view so it's by design. When you switch to the "Artist" view you're in a database...
When I sort the My Music folder by artist, the ability to search for album art disappears. Is that a bug or is it supposed to be...
Hi guys,
I have just bought a Pinnacle PCTV Hybrid Pro Stick (http://www.pinnaclesys.com/PublicSite/uk/Products/Consumer+Products/PCTV+Tuners/PCTV+Analog_Digital+PVR/PCTV+Hybrid+Pro+Stick+%28320e%29). It handles Digital and Analog TV, but in Mediaportal I can only scan for Digital Channels.
-How do I change so I can make an...
Hi guys,
I have just bought a Pinnacle PCTV Hybrid Pro Stick...
Hi guys,
I have just bought a Pinnacle PCTV Hybrid Pro Stick...
Thanks for that it works a treat
Thanks for that it works a treat
I have installed the MP 0.2.0.RC3 with Hauppage PVR250 USB2 Windows XP SP2 all works well except for two problems.
1.It will...
Yeah, i noticed that after I posted, sent an email with the info to 'frodo'
Yeah, i noticed that after I posted, sent an email with the info to 'frodo'
Hi, I have a Compro VideoMate Gold Plus, which has a Philips SAA7134 chipset. Unfortunately MediaPortal does not pick up my card...
are you sure? i thought there would be.....
are you sure? i thought there would be.....
When I say 'smart playlists' I mean ones that are constantly updated (ex. 'songs played at night', 'newly added songs', etc.)
rtv, thanks, that did the trick. I couldn't find that binary anywhere. It would be great if that could be in a FAQ somewhere.
Thanks,
Mike
rtv, thanks, that did the trick. I couldn't find that binary anywhere. It would be great if that could be in a FAQ somewhere...
Hi there... I did a bunch of searches but can't seem to find an authoritative answer, so I thought I would post a request.
How...
This is discussed in depth here
http://thegreenbutton.com/forums/thread/29899.aspx
You must have power to the USB ports whilst in standby and then it should be possible.
Cheers
m
This is discussed in depth here
http://thegreenbutton.com/forums/thread/29899.aspx
You must have power to the USB ports...
Is there a way to bring my HTPC back from suspend using my MCE remote?
I tried that, but it didn't seem to work. It can be that there are some other table / field that needs to be updated as well, but I don't think I will use any more time with MediaPortal Anyway since I must have Post Processing and that isn't supported with MediaPortal, so now I'm gonna look at GBPvr instead...
I tried that, but it didn't seem to work. It can be that there are some other table / field that needs to be updated as well, but I...
Hi
Is it possible to use MP to record 24/7 in one hour long files in an easy way?
To the TV engine developers
For the moment, the Disecq functionality is only available for specific DBV-S cards. Terractec cards (1200-s) is not listed.
Any idea when that card will be supported with Disecq in MP ?
Thanks for the outstanding work you are doing.
To the TV engine developers
For the moment, the Disecq functionality is only available for specific DBV-S cards. Terractec cards...
To the TV engine developers
For the moment, the Disecq functionality is only available for specific DBV-S cards. Terractec cards...
thanks for reply
yeah I have the dx9 ex mode on. I think the problem lies somewhere within my system specs old geforce and s video , it only likes 60 hertz and the old test version 2rc with cvs that came out not long after that supported an ancient compro software card. just think it will be best to ditch it
I see from some...
thanks for reply
yeah I have the dx9 ex mode on. I think the problem lies somewhere within my system specs old geforce and s...
Hi everybody
Just seeking a little advice
With a birthday coming up and the release of 0.2 ive decided to ditch my...
http://www.pensa.fr/mediaportal/index.htm
Hi it seems you can build a circuit for the above, but there are a lot of different versions using different pins etc.
Can anyone give a link etc to the one that works with the above software?
Regards
Gary
http://www.pensa.fr/mediaportal/index.htm
Hi it seems you can build a circuit for the above, but there are a lot of different...
http://www.pensa.fr/mediaportal/index.htm
Hi it seems you can build a circuit for the above, but there are a lot of different...
I used to get it happening. Now I don't.
I applied the dual tuner patches at some point - perhaps that helped.
I wonder if the issue is the signal for aspect ratio change.
I use nvidia codec - this is the only codec I know of that handles aspect ratio changing perfectly.
BigJ.
I used to get it happening. Now I don't.
I applied the dual tuner patches at some point - perhaps that helped.
I wonder if the...
I don't know if anyone else has this problem but when I try to record the tv series lost off of channel four or E4 it records up to...
I got some problems making MP reconize this card, its not the Dual card, it is only called like the topic on this thread, i really dont know what i might have done wrong, i downloaded that latests xml file with CaptureCardDefinations and when i press the "add" button in the setup, it just sais i have no valid capture cards... My...
I got some problems making MP reconize this card, its not the Dual card, it is only called like the topic on this thread, i really...
I got some problems making MP reconize this card, its not the Dual card, it is only called like the topic on this thread, i really...
I think you mean wmv files, as I have never heard of DRM'ed avi files before.
Unfortunatly I think the answer is no, the only programs that can play drm'ed wmv files that I know are WMP itself and a special version of zoom player. I even think you would have to pay a license fee to microsoft if you wanted to support drm in your...
I think you mean wmv files, as I have never heard of DRM'ed avi files before.
Unfortunatly I think the answer is no, the only...
Can MP play DRM licensed AVI files? I purchased a few videos of the wimbleton games and I can play them in Media Player. I get...
Seconded, I too would like to be able to do this.
Seconded, I too would like to be able to do this.
Can someone please please please tell me how I can stop the IMDB looking up & replacing cover art??? I losing my mind with this...
Theater 550 is supported too but new drivers smashed the MP support so someone had to make the process of listing all the filters again...
So please do so so at least we can see if that's the problem !
Theater 550 is supported too but new drivers smashed the MP support so someone had to make the process of listing all the filters...
I have the HVR-1300 working with digital but when I try and setup the composite input it gives me an error saying "Unable to...
I made some m3a playlists using winamp for a party last weekend. It worked quite nice, although some files didnt play (they stopped playback of the playlist). I believe that the same files DO play if I select them directly (not via a playlist). I really like that the "green marker" is progressing through the playlist unlike in regular...
I made some m3a playlists using winamp for a party last weekend. It worked quite nice, although some files didnt play (they stopped...
I made some m3a playlists using winamp for a party last weekend. It worked quite nice, although some files didnt play (they stopped...
we'll see :)
we'll see :)
The topic says it all.
I already have an Asus ATI 9800XT/256MB and an Asus nVidia 6600Pro/256MB.
My HEPC already has the...
The drivers definately aren't the latest.. I learnt awhile back that once you have a stable working version, dont update the driver! :lol:
I'm at work at the moment so I can't check the version.
The drivers definately aren't the latest.. I learnt awhile back that once you have a stable working version, dont update the...
I'm running two Dvico DVB-T HDTV tuners. 1st card is a Fusion DVB-T and the second is the Fusion DVB-T Lite. Both are installed and...
I have a NVTV single tuner card. It used to work with MEDIA CENTER. Now, I am trying to use it with Windows XP SP 2. I installed media portal 3.0 and everything seems ok except it find no channel (comcast cable) One thing I know is that my tuner card works bc I used to install a beyond tv trial version. Can someone help me to find...
I have a NVTV single tuner card. It used to work with MEDIA CENTER. Now, I am trying to use it with Windows XP SP 2. I installed...
I've installed Media Portal and configurated our TV-card (Pinnacle PCTV 50i), but, when I'm trying to Autotune the channels the...