General Support (57 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
Flipped picture is now solved I updated my ffdshow version, and now the picture is displayed correctly. Now i only have the screensaver problem. Any help would be very appreciated :)
Flipped picture is now solved I updated my ffdshow version, and now the picture is displayed correctly. Now i only have the...
Hi All I have searched the forum and the internet but with nbo luck, so here comes my problem: Area: Media Portal Program...
Replies
1
Views
2K
Thanks for your answer, but this is not a solution for me: My HTPC runs all the time but the setopbox is only used when watching tv or recording something. The problem is not so much the watching of live-tv but the recording: Sometimes I forget to switch on the Setopbox and only record a black screen for some hours. Thanks anyway TO
Thanks for your answer, but this is not a solution for me: My HTPC runs all the time but the setopbox is only used when watching tv...
Hy, is it possible that MP switches on my Setop-Box via the Hauppauge IRBlaster and turns it off again? I got the Blaster...
Replies
2
Views
1K
ASiDiE, it has definitely something to do with the network drive - I posted that to the bugs forum. I am sure that it is a bug - in all other places (e.g. music or movies location, the UNC paths work perfectly). G.
ASiDiE, it has definitely something to do with the network drive - I posted that to the bugs forum. I am sure that it is a bug - in...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 MediaPortal Skin: MCE 1280x720 Windows Version: Windows XP (SP2) .NET...
Replies
5
Views
1K
Very nice guide: http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list But I have a problem: On the third step adding the receiver component, there is only an outout. Without an input to the box there is now way of connecting it to the DVBC network provider. Anyone know how to get around this so I can add this...
Very nice guide: http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list But I have a problem: On the third...
Very nice guide: http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list But I have a problem: On the third...
Replies
0
Views
2K
Just run anyDVD in the background. It removes macrovision protection. I've been happily watching DVDs at 1920 x 1080 for quite some time now. www.slysoft.com
Just run anyDVD in the background. It removes macrovision protection. I've been happily watching DVDs at 1920 x 1080 for quite some...
So i just got my 6200 GPU and well i cant playback DVD via component, says something about being copy righted DVD, and cant be...
Replies
5
Views
1K
Find the option to choise RGB input for this in MP !!?? Can´t find a wiring diagram for this .. Is it realy possible to use a RGB input to this card??? If how to connect this.. Or is the RGB option only a feature.. Do any one now a card that support RGB input ??? Thanks
Find the option to choise RGB input for this in MP !!?? Can´t find a wiring diagram for this .. Is it realy possible to use a RGB...
Find the option to choise RGB input for this in MP !!?? Can´t find a wiring diagram for this .. Is it realy possible to use a RGB...
Replies
0
Views
755
hey guys, finally got my htpc all put together, windows xp pro installed with all the updates, but i can't get windows to recognize the theatrix tv capture card. I have installed sapphire's drivers, ati's drivers (which are the same), i have switched pci slots, uninstalled the hardware, re-installed it. I am at my wits end i have...
hey guys, finally got my htpc all put together, windows xp pro installed with all the updates, but i can't get windows to...
hey guys, finally got my htpc all put together, windows xp pro installed with all the updates, but i can't get windows to...
Replies
0
Views
764
MP1 MP2 Bad image quality DE
What does the other unknow set of inputs look like? Is it a large rectangle, some other shape or mabe some different colour RCA connectors? Whatever it is, it may be a little better... Try and describe it here as best you can... Also, tell your wife that moving the PC is only a temporary test. If you move it close and use a...
What does the other unknow set of inputs look like? Is it a large rectangle, some other shape or mabe some different colour RCA...
Help.................................... Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC4 (2006-04-18) MediaPortal...
Replies
9
Views
2K
Hmh. My geographic skills are deteriorating =) Never remember the difference between Scandinavia and Nordic. Norwegians are introvert you know, dont even want to play in the EU sandbox :-) regards knut
Hmh. My geographic skills are deteriorating =) Never remember the difference between Scandinavia and Nordic. Norwegians are...
Being the lazy person that I am, I find it unnecessary that people should do the same mundane tasks in parallell. Such as searching...
Replies
4
Views
2K
@NightmareRambo77 No, the problems are any movie files. And no, i didn´t tried the nvidia codecs. I think it is not a codec prob, it seemed like a screen calibration problem. scoop Tried your reg hack, unfort. not better. rtv I don´t have calibration* files ?!? Where are these files ? It seemed like a screen...
@NightmareRambo77 No, the problems are any movie files. And no, i didn´t tried the nvidia codecs. I think it is not a codec...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: MCE Windows Version: Windows XP (SP2)...
Replies
5
Views
2K
thnx OK, thnx
thnx OK, thnx
IMDB and other functions are not working in the latest version? Besides this problem MP is working beautiful now, Channel...
Replies
3
Views
946
You guys might wanna contact DMAN, he might be able to help you. Also you might be lucky with the next MP release (0.3.0.0). It will contain a new TV engine that can autodetect almost every card in the future on its own.
You guys might wanna contact DMAN, he might be able to help you. Also you might be lucky with the next MP release (0.3.0.0). It...
I cannot configure MediaPortal with my Sony PCV-RZ22G. This computer was one of the first to come with a Tv tuner already...
Replies
6
Views
2K
I read that people were having problems with MediaPortal and multi-core AMD cpus. Not sure if the problem even exists anymore but has anyone tried this utility to get it working? http://www.dailytech.com/article.aspx?newsid=3152
I read that people were having problems with MediaPortal and multi-core AMD cpus. Not sure if the problem even exists anymore but...
I read that people were having problems with MediaPortal and multi-core AMD cpus. Not sure if the problem even exists anymore but...
Replies
0
Views
1K
Hi Juan, I don't have any experience with Hauppauge DVB-T cards, so I don't know if they have any particular requirements. However, if a TV channel is advertised as being on a particular frequency (say 191,625) then I would expect that all DVB-T cards would have to tune to that exact frequency in order to receive that...
Hi Juan, I don't have any experience with Hauppauge DVB-T cards, so I don't know if they have any particular requirements...
Area: Media Portal Program MediaPortal Version: 0.2 MediaPortal Skin: MCE 16:9 Windows Version: Windows XP MCE (SP2) .NET CLR...
Replies
18
Views
3K
If after deleting several channels everything works as expected, maybe one of the devs sould take a detailed look at this problem. You can post the issue in http://www.testteam-mediaportal.com/Joomla/ along with logs and possibly the database. However since the dev is transitioning to a new TV plugin, I don't know how the issue would...
If after deleting several channels everything works as expected, maybe one of the devs sould take a detailed look at this problem...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
6
Views
2K
Oh. How careless of me not to do that. :wink: I installed SP2 and now it works flawlessly! Thank you very much! Best regards, Kristoffer
Oh. How careless of me not to do that. :wink: I installed SP2 and now it works flawlessly! Thank you very much! Best...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP1)...
Replies
5
Views
3K
Hello, following problem: Windows gets right back to hibernation after waking it up from hibernation! I can see my Windows background but then it prepares for hibernation! I ve to reboot the system in order to get it working again... I hope you guys can help me! Area: Media Portal Program MediaPortal Version: 0.2.0.0...
Hello, following problem: Windows gets right back to hibernation after waking it up from hibernation! I can see my Windows...
Hello, following problem: Windows gets right back to hibernation after waking it up from hibernation! I can see my Windows...
Replies
0
Views
847
MP1 MP2 Sound problem DE
Area: Media Portal Program MP Version: 0.2 Skin: BlueTwo Windows Version: WIN XP + SP1 CPU Type: AMD Athlon 2800+ 1800Mhz@2200Mhz Memory: 2x256, Kingston Motherboard Chipset: ASUS K8s-MX socket 754 Video Card: ATI Radeon 9200 Video Card Driver: latest Ati driverso Video Card Resolution: 1024x768 Video Render Type: VMR9...
Area: Media Portal Program MP Version: 0.2 Skin: BlueTwo Windows Version: WIN XP + SP1 CPU Type: AMD Athlon 2800+...
Area: Media Portal Program MP Version: 0.2 Skin: BlueTwo Windows Version: WIN XP + SP1 CPU Type: AMD Athlon 2800+...
Replies
0
Views
1K
I've tried all the media centre apps and have found this to be the best, i have probably been a bit lucky that i have had only minor problems which i have been able to work out by reading these forums. Your problem is something that i havent had issues with but your best bet would be to pm one of the moderators with your support...
I've tried all the media centre apps and have found this to be the best, i have probably been a bit lucky that i have had only...
Media portal sees my Twinhan DTV Sat-CI but when i set it to scan it crashs. I am tuning to Astra 2A and set the LNB as 1 off, No...
Replies
3
Views
1K
MP1 MP2 I need buttons ! DE
There's another one: You touchscreen driver most like has an option to evaluate a long press as right click - this is what I do in my car..
There's another one: You touchscreen driver most like has an option to evaluate a long press as right click - this is what I do in...
In my kitchen, I run Mp on a PC with an attached Touch Screen (17"). Since I only use this one for listening to music, I have no...
Replies
6
Views
1K
Hi everybode, I want to purchase this card, can you tell me if she was ready for MP TV and MP Radio. chips: Marvell 88W8335 WiFi chip, Marvell 88w030-NNp1, and a few TV chips (saa7131e, tda8275ac1, tda10046) tuner: connectors: Analog TV in, DVB-T in, Svideo/composite, Wifi Ariel Port, Wifi Activity Light pcb: WIFI.TV Rev...
Hi everybode, I want to purchase this card, can you tell me if she was ready for MP TV and MP Radio. chips: Marvell 88W8335...
Hi everybode, I want to purchase this card, can you tell me if she was ready for MP TV and MP Radio. chips: Marvell 88W8335...
Replies
0
Views
2K
You cannot map that button, it is handled by your XP and other applications cannot control that. You can only "adjust" its behaviour in your XP energy settings control panel. There's a dropdown what the PC should do when the "Powerdown" or "Standby" buttons on your PC/keyboard/remote get pressed.
You cannot map that button, it is handled by your XP and other applications cannot control that. You can only "adjust" its...
When pressing the power button on my x10 remote, I would like to see the same menu as I see when clicking the red shutdown icon on...
Replies
5
Views
2K
Hi Perfect, thanks for taking your time to answer a distress call ;) Best Regards
Hi Perfect, thanks for taking your time to answer a distress call ;) Best Regards
According to the changelog for 0.2 this issue was fixed : On 19/06/2006 [13:09:34] mPod: fixed: Green/Yellow button did not work...
Replies
7
Views
1K
I was pretty frustrated that my All-In-Wonder would no longer work with version 0.2. I have done some related programing in the past so I looked at the xml file for the capture cards. The AIW series was commented out. After re-enabling them I found out why...someone made a mistake with the pin connection assignments. My AIW is...
I was pretty frustrated that my All-In-Wonder would no longer work with version 0.2. I have done some related programing in the...
I was pretty frustrated that my All-In-Wonder would no longer work with version 0.2. I have done some related programing in the...
Replies
0
Views
982
I was wondering the same thing. Today I cant record anything on one channel while I watch another. Do I have to buy several subscription cards to get this to work? I have a bad feeling about this, I think the content providers' policy is "One tuner, One card".
I was wondering the same thing. Today I cant record anything on one channel while I watch another. Do I have to buy several...
MP has some wonderfull features like the support for multiple tuners and alike, but can it manage with only 1 card and share this...
Replies
1
Views
1K
thx :D
thx :D
hi, first off thx to all involved for producing such a good piece of software. Now onto my request ;) I'm looking for the MCE...
Replies
2
Views
1K
MP1 MP2 Remote questions DE
Could work, no idea. :wink: You'd have to configure HIP to send keystrokes to MP.
Could work, no idea. :wink: You'd have to configure HIP to send keystrokes to MP.
Wonder if someone can clear this up for me... I would like to be able to initiate and also wake up from S3 standby via my...
Replies
3
Views
2K
I read a news about the Technotrend DVB-S budget: Technotrend Common Interface Written by DMAN Wednesday, 01 March 2006 but if I look to the list of the supported capture cards (Sticky, hardware forum): Definitive list of supported (+ unsupported) capture cards this capture card in not listed! So, what is the...
I read a news about the Technotrend DVB-S budget: Technotrend Common Interface Written by DMAN Wednesday, 01 March 2006...
I read a news about the Technotrend DVB-S budget: Technotrend Common Interface Written by DMAN Wednesday, 01 March 2006...
Replies
0
Views
921
Hi I have a ATI AIW 9800card with Catalyst 6.6 and the latest builds of MediaPortal on a PC with Windows Media Center 2005..After removing the <!-- before my card it working OK. Only thing is that 1 minute after I start Mediaportal (dont have to be on TV) the ehRec.exe (from Windows Mediacenter) starts for 10sec.and closes again...
Hi I have a ATI AIW 9800card with Catalyst 6.6 and the latest builds of MediaPortal on a PC with Windows Media Center 2005..After...
Hi I have a ATI AIW 9800card with Catalyst 6.6 and the latest builds of MediaPortal on a PC with Windows Media Center 2005..After...
Replies
0
Views
1K
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: MCE Windows Version: Windows XP (SP2) .NET CLR Version: 2.0.50727 DirectX Version: 4.09.00.0904 (9.0c) Audio Codec: ffdShow Audio Decoder Video Codec: Cyberlink Video/SP Decoder CPU Type: Intel Pentium 4 - 2.80GHz Memory: 2 GB Motherboard...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: MCE Windows Version: Windows XP (SP2)...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: MCE Windows Version: Windows XP (SP2)...
Replies
0
Views
1K
Top Bottom