Post problems you have when using MediaPortal,
or pre installation questions in here.
FWIW - I can run MP on either of my 2 monitors - in windowed mode or maximized mode - but not fullscreen. I can move the MP window from one monitor to the other without any problems.
FWIW - I can run MP on either of my 2 monitors - in windowed mode or maximized mode - but not fullscreen. I can move the MP window...
hey,
i use my comp for both work and play.. sometimes at the same time! is there a way to use media portal on one screen while...
Hi,
I would like to use HIP and my microsoft remote to exit my emulators like winuae, zsnes, mame etc.
Is it possible to use HIP only for controlling the emulators and not for mediaportal?
My problem is that I can define more settings in mediaportal configuration by using conditions. For example the pause button on my...
Hi,
I would like to use HIP and my microsoft remote to exit my emulators like winuae, zsnes, mame etc.
Is it possible to use...
Hi,
I would like to use HIP and my microsoft remote to exit my emulators like winuae, zsnes, mame etc.
Is it possible to use...
Damm....I searched and searched for a Danish version of the patches, I will try it later today ... Thanx! :D
Damm....I searched and searched for a Danish version of the patches, I will try it later today ... Thanx! :D
Area: Media Portal Program
MP Version: 0.2 release
Skin: Razor
Windows Version: XP sp.2
CPU Type: P4, 2,53 MHz
Memory...
Check the configuration -> General settings. There are a pair of options to put MP in the system tray on exit.
Check the configuration -> General settings. There are a pair of options to put MP in the system tray on exit.
Hi,
I am new to using MP as I was fed up with the rubbish EPG with WinTV 2000, and I like the way MP is sililar to sky by being...
I use Leadtek TV2000XP expert card with P4 3GHz HT and ge6600 and the CPU usage is about 60-70% with Intervideo codec (encoder & decoder).
I think u need better video card and/or better CPU.
I use Leadtek TV2000XP expert card with P4 3GHz HT and ge6600 and the CPU usage is about 60-70% with Intervideo codec (encoder &...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: Razor
Windows Version: Windows XP (SP2)...
Thanks Callifo! I'll try it out.
Thanks Callifo! I'll try it out.
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC1 - Latest CVS
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
I assume this is an ATSC card is it not? From what I understand that format is still a work in progress and while some have reported some success it still not officially supported as I understand.
I assume this is an ATSC card is it not? From what I understand that format is still a work in progress and while some have...
:evil: :evil: :evil: :evil: :evil:
I bought this FusionHDTV RT 5 Gold card to replace the montly cost and to have usability...
Id probably guess in that case WMP is using a bad codec. MP will always use the mpeg2 codec you specify whereas WMP uses merits.
Id probably guess in that case WMP is using a bad codec. MP will always use the mpeg2 codec you specify whereas WMP uses merits.
Every time when I record tv the picture is shifted to the right. I get a big black area on the left en I'm missing video material...
Yeah, thanks for that.
I think I will get myself m$'s blaster.
:oops: I'm glad I didn't waste too much time trying to get the stupid thing to send ir signals :oops:
Yeah, thanks for that.
I think I will get myself m$'s blaster.
:oops: I'm glad I didn't waste too much time trying to get the...
Hi there,
is it possible to use this http://www.origenae.com/product_vfd.htm to control an external stb with MP?
I have just...
Strangely it seems to be picking up channels again after like 25 scans of nothing. Very strange. Don't think I changed any settings.
I've been messing around with graphedit, dunno if somehow this has kicked it back into action. Very weird.
Strangely it seems to be picking up channels again after like 25 scans of nothing. Very strange. Don't think I changed any...
Hi there,
I have this hybrid device and it is recognised in mediaportal. I was getting channels with it a while ago.
I...
Is there any way to get this card to work with mediaportal?
No TV Tuners are found when I try and set it up, but the tuner works fine with ATI Multimedia Centre (which totally sucks.)
If that's not possible, can mediaportal work with an ADS Instant HDTV tuner card? It's not listed in the supported cards...
Is there any way to get this card to work with mediaportal?
No TV Tuners are found when I try and set it up, but the tuner...
Is there any way to get this card to work with mediaportal?
No TV Tuners are found when I try and set it up, but the tuner...
hey cool thx a lot
u r no 1
hey cool thx a lot
u r no 1
hi @ all
i have problems with the video codecs
dvd playback is not realy in dolby 5.1
(i use a soundblaster live with 5.1...
You could try to install the patch into your MediaPortal folder.
If you know how to use SVN-Patches you can also try the latest one.
Hibernating changes are in since 10.07.2006.
Regards
Ralph
You could try to install the patch into your MediaPortal folder.
If you know how to use SVN-Patches you can also try the latest...
Sorry for the apprently (truly?) newby question. Does powerscheduler wake up MP even if the hibernation was forced with the command...
Thanks for 'AutoIt'. I didn't know it. :D
Concerning your problem, I have no clue how to help you. sorry :(
Thanks for 'AutoIt'. I didn't know it. :D
Concerning your problem, I have no clue how to help you. sorry :(
Hi there,
I'm running mediaportal with a Twinhan Magic Box Pro and it seems to be working ok. I have a dual monitor setup and...
// Centre the movie
float iPosY = ( ScreenHeight - fNewHeight ) / 2;
float iPosX = ( ScreenWidth - fNewWidth ) / 2;
I cannot see at the moment what could fail there...
Most likely you screen isn't calibrated correctly
// Centre the movie
float iPosY = ( ScreenHeight - fNewHeight ) / 2;
float iPosX = ( ScreenWidth -...
I cant quite put my finger on it, but since installing 0.2.0 final, it seems that many (though not all) combinations of source and...
Hi!
I'm using a Hauppauge WinTV Go2 TV Card with an CX881 Chip and tried out MediaPortal a few days ago.
It seems, that MediaPortal does not support this TV card. I read through the threads on finding out the filters of the cards using GraphEdit but I don't really understand how to do that...
Has anyone of you ever used this...
Hi!
I'm using a Hauppauge WinTV Go2 TV Card with an CX881 Chip and tried out MediaPortal a few days ago.
It seems, that...
Hi!
I'm using a Hauppauge WinTV Go2 TV Card with an CX881 Chip and tried out MediaPortal a few days ago.
It seems, that...
Tried OmegaDrivers, done countless tweaks.
I've given up on Purevideo. It's useless when watching DVB streams with an ATi card.
I'm now concentrating my efforts on Dscaler in combination with FFdshow postprocessing. Superb picture so far.
Tried OmegaDrivers, done countless tweaks.
I've given up on Purevideo. It's useless when watching DVB streams with an ATi card...
Area: Media Portal
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: 3DMP-Blue
Windows Version: Windows XP (SP2)...
works fine for me to. Thanks. Do you know how to run a plugin like WinCSC in Mediaportal to?
works fine for me to. Thanks. Do you know how to run a plugin like WinCSC in Mediaportal to?
There are some "new" cards out from Twinhan (1034/2033/3028/3030) which are using a Mantis chip. Installing their BDA-driver shows...
It doesnt need one. Typically hardware cards dont need this as its fed through the pci bus by the onboard encoder.
It might be worth checking your driver version and perhaps updating them if needed.
It doesnt need one. Typically hardware cards dont need this as its fed through the pci bus by the onboard encoder.
It might be...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-24.04.2006- 1:00:54,17
(2006-04-24)
MediaPortal Skin: BlueTwo...
An alternative is a crimped d sub connector, put the cable through the wall and then crimp and insert the pins into the D sub plug.
An alternative is a crimped d sub connector, put the cable through the wall and then crimp and insert the pins into the D sub plug.
I have just bought a new tv. And I want to install a HTPC with it.
Though for the moment I am a little short on cash :cry:
But...
It should just find it and work. Mind you, it registers it with some funny name, like an ATI Elite AIW 9900, or something like that (not at the system to check exact name), but it still works.
What is it giving you for available TV cards? Is your card present in the windows device manager? Are there any errors? Does it work in...
It should just find it and work. Mind you, it registers it with some funny name, like an ATI Elite AIW 9900, or something like that...
How do i get Mediaportal 0.2.0.0 to recognize my Powercolor tv-tuner card. I have looked around in the forum, but i cant something...
Hi,
Just try to apply it on top of the old one, but make a backup first, in case something goes wrong, then run start.bat in mediaportal root folder & test with running MP Setup first & check that your configuration it's fine & try MP.
Regards
Roy
Hi,
Just try to apply it on top of the old one, but make a backup first, in case something goes wrong, then run start.bat in...
I read the page on how to install Stable patch for 0.2 release. Does it mean i have to reinstall all plugins and reconfigure...
Flipped picture is now solved
I updated my ffdshow version, and now the picture is displayed correctly.
Now i only have the screensaver problem. Any help would be very appreciated :)
Flipped picture is now solved
I updated my ffdshow version, and now the picture is displayed correctly.
Now i only have the...
Hi All
I have searched the forum and the internet but with nbo luck, so here comes my problem:
Area: Media Portal Program...
Thanks for your answer, but this is not a solution for me: My HTPC runs all the time but the setopbox is only used when watching tv or recording something.
The problem is not so much the watching of live-tv but the recording: Sometimes I forget to switch on the Setopbox and only record a black screen for some hours.
Thanks anyway
TO
Thanks for your answer, but this is not a solution for me: My HTPC runs all the time but the setopbox is only used when watching tv...
Hy,
is it possible that MP switches on my Setop-Box via the Hauppauge IRBlaster and turns it off again?
I got the Blaster...
ASiDiE, it has definitely something to do with the network drive - I posted that to the bugs forum. I am sure that it is a bug - in all other places (e.g. music or movies location, the UNC paths work perfectly).
G.
ASiDiE, it has definitely something to do with the network drive - I posted that to the bugs forum. I am sure that it is a bug - in...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0
MediaPortal Skin: MCE 1280x720
Windows Version: Windows XP (SP2)
.NET...
Very nice guide:
http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list
But I have a problem:
On the third step adding the receiver component, there is only an outout. Without an input to the box there is now way of connecting it to the DVBC network provider.
Anyone know how to get around this so I can add this...
Very nice guide:
http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list
But I have a problem:
On the third...
Very nice guide:
http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list
But I have a problem:
On the third...
Just run anyDVD in the background. It removes macrovision protection. I've been happily watching DVDs at 1920 x 1080 for quite some time now.
www.slysoft.com
Just run anyDVD in the background. It removes macrovision protection. I've been happily watching DVDs at 1920 x 1080 for quite some...
So i just got my 6200 GPU and well i cant playback DVD via component, says something about being copy righted DVD, and cant be...
Find the option to choise RGB input for this in MP !!??
Can´t find a wiring diagram for this .. Is it realy possible to use a RGB input to this card??? If how to connect this..
Or is the RGB option only a feature..
Do any one now a card that support RGB input ???
Thanks
Find the option to choise RGB input for this in MP !!??
Can´t find a wiring diagram for this .. Is it realy possible to use a RGB...
Find the option to choise RGB input for this in MP !!??
Can´t find a wiring diagram for this .. Is it realy possible to use a RGB...
hey guys,
finally got my htpc all put together, windows xp pro installed with all the updates, but i can't get windows to recognize the theatrix tv capture card. I have installed sapphire's drivers, ati's drivers (which are the same), i have switched pci slots, uninstalled the hardware, re-installed it. I am at my wits end i have...
hey guys,
finally got my htpc all put together, windows xp pro installed with all the updates, but i can't get windows to...
hey guys,
finally got my htpc all put together, windows xp pro installed with all the updates, but i can't get windows to...
What does the other unknow set of inputs look like? Is it a large rectangle, some other shape or mabe some different colour RCA connectors? Whatever it is, it may be a little better...
Try and describe it here as best you can...
Also, tell your wife that moving the PC is only a temporary test. If you move it close and use a...
What does the other unknow set of inputs look like? Is it a large rectangle, some other shape or mabe some different colour RCA...
Help....................................
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal...