Post problems you have when using MediaPortal,
or pre installation questions in here.
Latest SVN builds have improved those times alot. For more info on SVN's -> http://svn.team-mediaportal.com/.
Latest SVN builds have improved those times alot. For more info on SVN's -> http://svn.team-mediaportal.com/.
I am glad that I found out MediaPortal after purchasing the TV tuner card. It's been all well and outperformed the Forceware...
Medion remotes...
I have two different Medion remotes and had them working for a while with Mediaportal with a plugin. I found them slow and unreliable. I think it was more the plugin's fault as they worked great with the crappy Cyberlink software.
Also as they were different, I had to configure them differently due to different...
Medion remotes...
I have two different Medion remotes and had them working for a while with Mediaportal with a plugin. I found...
Hi,
i like MediaPortal, but i got a problem with my Medion remote control. I can't start MP with my rc if I press the...
It uses what ever codec you have installed, or if you have multiple codecs, whatever has the highest merit. You can see what its using if you grab a copy of graphedit and use it to render an Xvid file.
It uses what ever codec you have installed, or if you have multiple codecs, whatever has the highest merit. You can see what its...
So I am in the process of backing up my DVD collection to xvid and I am noticing something disturbing. The quality of the movies...
You may be encountering this bug.... :(
Check the frequencies that MediaPortal has recorded against what they should be. Also it would be helpful if you used the Support Template....
You may be encountering this bug.... :(
Check the frequencies that MediaPortal has recorded against what they should be. Also...
All,
Just thought id post the config i used to get my FunAction Oxford PG700 (a Yuan PG700) working.
<capturecard...
in the web browser how do i go forward , back, and how do i go "Home" .
also, when i type the address in the address bar is it possible to use remote control as if we use our cellphone to type sms.
in the web browser how do i go forward , back, and how do i go "Home" .
also, when i type the address in the address bar is it...
in the web browser how do i go forward , back, and how do i go "Home" .
also, when i type the address in the address bar is it...
Hi, I just buyed my fist decoding card, and after a shocking impact with power cinema I tried media portal :).
The card is a TwinhanTV Ter (D+A), and as now the results are:
DVB-T: working, channels scanned via the setup
Analog: unable to scan the channels (i don't even found a button to do so)
Remote: working, as general HID...
Hi, I just buyed my fist decoding card, and after a shocking impact with power cinema I tried media portal :).
The card is a...
Hi, I just buyed my fist decoding card, and after a shocking impact with power cinema I tried media portal :).
The card is a...
Is it possible to turn it on and off without going into the configuration, maybe with your remote? I want to add subtitles, but dont always want them on
Is it possible to turn it on and off without going into the configuration, maybe with your remote? I want to add subtitles, but...
I've noticed my .srt subtitles does not show up when playing a ex. xvid movie, the subs are located in same folder with same...
i am using:
x Skystar2 dvb-s
x floppydtv - ci dvb-s + AlphaCrypt CAM + ORF Smartcard
both work pretty perfect with MediaPortal and latest SVN-builds
i am using:
x Skystar2 dvb-s
x floppydtv - ci dvb-s + AlphaCrypt CAM + ORF Smartcard
both work pretty perfect with MediaPortal...
Hello,
I'm thinking about to switch over to DVB-S or DVB-C. So I need a DVB-S or DVB-C card. Right now it really depends what is...
Hello,
I'm using Zoom Player as DVD player in MP.
So I setup MP to use it by giving the command line parameters.
There are 3 types of DVD files : physical disc, mounted ISOs and files on HD.
ZP needs only the VIDEO_TS.IFO file to work. I suppose it is the %filename% parameter.
But it does not work with physical discs. I can't...
Hello,
I'm using Zoom Player as DVD player in MP.
So I setup MP to use it by giving the command line parameters.
There are 3...
Hello,
I'm using Zoom Player as DVD player in MP.
So I setup MP to use it by giving the command line parameters.
There are 3...
I might give this one a try:
Logitech Harmony 628
Still wish it had fewer buttons, but that's life.
I might give this one a try:
Logitech Harmony 628
Still wish it had fewer buttons, but that's life.
Sorry... I'm a bit of a MediaPortal newb and couldn't find an answer to this when I searched the forums.
I have a USB-UIRT and...
Thanks for the information on Autostart -- works like a charm!
I'm new to this forum and I really did search quite a bit before posting the question!
Thanks again,
Paul
Thanks for the information on Autostart -- works like a charm!
I'm new to this forum and I really did search quite a bit before...
Hello,
Is there a way to have MediaPortal start on a different screen rather than the home screen? For example, I would like MP...
I think it worked! Thank you very much!
Best regards
/Gustav
I think it worked! Thank you very much!
Best regards
/Gustav
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
Pinnacle PCTV 50i works with MEDIAPORTAL????
Pinnacle PCTV 50i works with MEDIAPORTAL????
Pinnacle PCTV 50i works with MEDIAPORTAL????
THanks man.
Tell the Smart guys about the record and watching the same channel problem. They will fix it in a SVN update tomorrow :)
Thanks.
THanks man.
Tell the Smart guys about the record and watching the same channel problem. They will fix it in a SVN update...
Just want to start doing some recording with MP. At the moment iam using a Dvico HDTV PLUS DVB-t card and works Fantastic with MP...
here is my configuration:
Area: MediaPortal
MP Version: 0.2.0.0 RC4
Skin: Razor
Windows Version: Windows XP Prof-Edition with SP2
CPU Type: Intel Pentium4 3,0Ghz
Memory: 1x 512MB
Motherboard Chipset: Intel 875P
Video Card: ATI Radeon 9600XT 256MB (Sapphire)
Video Card Driver: 6.14.10.6525
Video Card Resolution: 800x600...
here is my configuration:
Area: MediaPortal
MP Version: 0.2.0.0 RC4
Skin: Razor
Windows Version: Windows XP Prof-Edition with...
here is my configuration:
Area: MediaPortal
MP Version: 0.2.0.0 RC4
Skin: Razor
Windows Version: Windows XP Prof-Edition with...
Thank you very much for your help, the card has been found by mediaportal.
But now I've an other problem.
Mediaportal now didn't found any channels by channel scan.
I wanted to use german cable-tv but i didn't find any configuration-possibility to set up the frequencies...
Greets
Stefan
Thank you very much for your help, the card has been found by mediaportal.
But now I've an other problem.
Mediaportal now...
Hi!
Area: MediaPortal
MP Version: 0.2.0.0 RC4
Skin: MCE
Windows Version: Windows XP Home-Edition with SP2
CPU Type: Intel...
Well, bought another TV card (Compro DVB 300T) and tried it with MP and exactly the same results on 3 computers as with my Avermedia Cardbus Hybrid - "No TV signal detected" was the error given when accessing analog channels. A good effort by the MP team but I have given up!
Well, bought another TV card (Compro DVB 300T) and tried it with MP and exactly the same results on 3 computers as with my...
I got this tv-card:
http://www.avermedia.com/cgi-bin/products_digitvtuner_hybridcardbus.asp?show=2
(only then the version not...
Thanks framug
The last post for this problem was in April 06 and still no solution.
It is clear to me from what I have just read that it is MP causing the problem!
Before MP, standby works a treat, I install MP standby ceases to work, I unistall MP standby still broken!
The unistall for MP is not un-setting the system back...
Thanks framug
The last post for this problem was in April 06 and still no solution.
It is clear to me from what I have just...
Can you help with this most annoying side affect.
Computer would standby perfectly before MP installed.
After installation would...
Hi,
I use FFDSHOW audio filter only for SPDIF passtrough, could this be a hint for you?
Hi,
I use FFDSHOW audio filter only for SPDIF passtrough, could this be a hint for you?
I am unable to get dolby digital to pass thru on mpeg2 files and dvd's anymore.. worked in rc3. It now all comes across as pcm -...
dt
Hi, I use this card with MP and it works almost perfekt, with the BDA drivers. It's a fast card that does not use to much CPU power.
dt
Hi, I use this card with MP and it works almost perfekt, with the BDA drivers. It's a fast card that does not use to much CPU...
Hi,
i am looking for a new tv card and maybe somebody has a suggestion.
It should be a hybrid DVB-T/analog/FM-Tuner card, if...
FloppyDTV is quite far away from what i meant abowe, but thanks for this commercial. They seem to hide all product details in their web site, not very convincing but it may be enough for their target customers. I beleve that it may work flawlessly, but you probably not meant that it can offer HW decoding for other DVB-sources in your...
FloppyDTV is quite far away from what i meant abowe, but thanks for this commercial. They seem to hide all product details in their...
Hi,
I'm considering to buy TT-premium C-2300. I already have Pinnacle 310i(DVB-T) and Terratec cinergy 1200 (DVB-C). My problem...
Well, I'm not sure but, if you disable it and you apply modifications described before with your wlan usb adapter, why not ? Please try and tell if OK :wink:
Well, I would like to know why too. Maybe some MP DEVs can explain that ? :oops:
Well, I'm not sure but, if you disable it and you apply modifications described before with your wlan usb adapter, why not ? Please...
Hello,
Since many SVN and SVN from 18/06/2006 too, I have unwanted wakeup and no hibernate after this wakeup.
I have no scheduled...
Check that you display adapter is feeding picture with correct refresh rate when DVI is connected. 50/75/Hz for PAL and 60 for NTSC
Check that you display adapter is feeding picture with correct refresh rate when DVI is connected. 50/75/Hz for PAL and 60 for NTSC
Hello.
I have a problem that has been bothering me for a long time. First my hardware setup:
Mainboard: MSI Neo 945P
CPU...
seems to be technotrends BDA drivers fault
it can only do QAM64
seems to be technotrends BDA drivers fault
it can only do QAM64
i searched and searched but couldnt find this
so i bought a dvb-c card and meedio went down the drain with yahoo buyout, and now...
go to the tvscreen an uncheck the "tv on" button ?
go to the tvscreen an uncheck the "tv on" button ?
Is there anyway to have MediaPortal stop playing a video or TV when you exit full-screen mode?
Thanks
no i reinstalled it to the same folder but i went and deleted those files and now it works.
thanks a lot!
-jakob
no i reinstalled it to the same folder but i went and deleted those files and now it works.
thanks a lot!
-jakob
Media portal simply wont load
I have uploaded the log file here:
http://files.jakobh.com/MediaPortal.log
Area: Media Portal...
Thx for your reply's
Next time ill use the tool when reporting problems.
I got it working now again with the following steps:
In the start.bat file I changed all register lines to unregiter lines and run it in the MP dir. Atterwards uninstall and install MP again and all is fine.
I will try the SVN snapshot later again...
Thx for your reply's
Next time ill use the tool when reporting problems.
I got it working now again with the following steps...
Hi,
I'm new to mediaPortal so here is my first cry for help.
I have installed the latest version of MediaPortal on my windows...
Hello,
first of all, you should see the MP codecs in configuration. If you use a svn and the codecs aren´t visible in configuration, try to execute the start.bat in the MP directory. That should fix it. If you´re not using a svn, try to reinstall MP. Windows and codecs is sometimes a little bit difficult :roll:
For your Xvids...
Hello,
first of all, you should see the MP codecs in configuration. If you use a svn and the codecs aren´t visible in...
I am having a serious issue here. I just did a fresh install of Windows and MP. I have configured MP the way I want it, but when...
Anyone?
Pllleeeaaaas help!! I dont know what to do anymore. Reinstalled BDA drivers. But did not help..
Anyone?
Pllleeeaaaas help!! I dont know what to do anymore. Reinstalled BDA drivers. But did not help..
Area: Media Portal Program
MP Version: 0.2RC4
Skin:
Windows Version: XP Pro SP2
CPU Type: Athlon 3000
Memory: 1GB...
Cinergy 2400 i DT
Problems… :cry: .After i had install the driver to the 2400 i DT my pc cant close, only reboot.
The pc stops at the “windows close†screen , and shot down the hd. In standby mode it dose the same.
If i remove the driver, the pc run fine again.
My bios and motherbord driver is opdatet.
C 2400 i DT...
Cinergy 2400 i DT
Problems… :cry: .After i had install the driver to the 2400 i DT my pc cant close, only reboot.
The pc...
Cinergy 2400 i DT
Problems… :cry: .After i had install the driver to the 2400 i DT my pc cant close, only reboot.
The pc...