Post problems you have when using MediaPortal,
or pre installation questions in here.
Stupit Newbe Mistake
I did have the box checked, but the problem was some other stupid newbe mistake....
I didn't want to install all the extra programs that came w/ the PVR-150.... so I just installed the drivers... mistake.
Once I installed all the software that came w/ the card, it worked fine.
Stupit Newbe Mistake
I did have the box checked, but the problem was some other stupid newbe mistake....
I didn't want to...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-30.04.2006- 1:01:06,34
(2006-04-30)
MediaPortal Skin: BlueTwo...
yeah i saw that deltachrome embedded into the apextrme...might be interesting...
thx for all the replies
yeah i saw that deltachrome embedded into the apextrme...might be interesting...
thx for all the replies
Hi
does anyone know of a Mini-ITX that is capable of DX9 with its onboard Grafix?
thx
Cobra
I bought the iMon VFD and installed it. Now it can be done by pressing the Fullscreen button on the remote :-)
I bought the iMon VFD and installed it. Now it can be done by pressing the Fullscreen button on the remote :-)
When I run (stream) radio a small oscilloscope is shown (with Blue Two skin). I try to click on it but couldn't get it to display...
sure :)
I just don't feel comfortable since everything else has...
(ffdshow itself is rather old right?)
sure :)
I just don't feel comfortable since everything else has...
(ffdshow itself is rather old right?)
I have a few hundrends of videos that are not movies, just funny clips etc. How can I make the system NOT scan them at online...
hi,
i can´t switch off the subtitles if playing back .avi (where the subs are not in the container but in the same folder). the movie playback is ok and i can see the subtitles (vobsub) but if i try to switch them off (pressing "L") the don´t disappear ...
can you help me?
btw: is switching through subtitles possible? (if...
hi,
i can´t switch off the subtitles if playing back .avi (where the subs are not in the container but in the same folder)...
hi,
i can´t switch off the subtitles if playing back .avi (where the subs are not in the container but in the same folder)...
Thanks..
I'm so stupid :lol:
Thanks..
I'm so stupid :lol:
When I have made a change in the setup and want to exit it, it pop's up with a window "No music folders specified" and I am not...
after the last svn with rc4 it works.-...
I installed opn top the old rc2(after uninstalling it leaving the folder,.,,)
Kjelds
after the last svn with rc4 it works.-...
I installed opn top the old rc2(after uninstalling it leaving the folder,.,,)
Kjelds
Hi
I can not get mediaportal rc2 to decode the coded channels, It works fine with the none coded one(I live in denmark and use...
Re: I'm having exactly the same problem!
Please read this...
Re: I'm having exactly the same problem!
Please read this...
I decided to reinstall windows yeterday but i cant get media portal to detect the tunner card now
So far i have tryed the...
Glad to be able to contribute. Just for info I get the same jerky/stuttering picture with only one mem stick. With 2 sticks no problems.
Glad to be able to contribute. Just for info I get the same jerky/stuttering picture with only one mem stick. With 2 sticks no...
Area: Media Portal 2.0.0rc3 svn4-16-2006/19:11 / Media Portal Skin mce /
Skin: the skin you use
Windows Version: Windows XP...
i noticed :oops:
Thanks
checking it out when i have some time left
i noticed :oops:
Thanks
checking it out when i have some time left
First off all i use RC2 because i cant add my TV card in the RC3 or 4 version
But that isnt really a problem i think
I try to...
rocketskies
This does seem to be a time issue.
Somewhere your system is out timewise, so when trying to record it is showing the equivalent of "program finished". saying that, why does it then record the correct recording for the exact time ?
Unless somebody wiser than me jumps onboard this post, i am lost/confused because it...
rocketskies
This does seem to be a time issue.
Somewhere your system is out timewise, so when trying to record it is showing...
Area: Media Portal Program
MP Version: 0.2.0.0 RC4 (2006-04-18)
Skin: MCE
Windows Version: windows xp home sp2
CPU Type: AMD...
Here's how it works:
Set the timeout setting in MP Configuration.
Set your alarms.
When they trigger, you will get a dialog and your selected trigger option will start playing (e.g. Internet Radio). On that dialog you have 6 options, the first five allowing you to snooze the alarm, and the last one allowing you to dismiss the...
Here's how it works:
Set the timeout setting in MP Configuration.
Set your alarms.
When they trigger, you will get a...
I am using myAlarm to wake me up in the morning with my favourite cable radio station. This works perfectly.
Now, I would like...
great thanks!
great thanks!
My HTPC hard disk is rather small (120GB), it does have some videos and MP3, but my main bulk of video and audio is in two external...
i would like this as well.
jW
i would like this as well.
jW
I noticed in media portal that when watching a video or movie, whenever I change the volume using my remote I get a nice little OSD...
Only through My Videos...and you can configure MediaPortal to autoplay the DVD from any screen - you first need to disable Windows Autoplay, though.
Yes, I highly recommend you use DUGG - send a PM to "angusmann" and he will give you the details... :)
Also, turn off the "Grab EPG from DVB" option in Configuration - I have found...
Only through My Videos...and you can configure MediaPortal to autoplay the DVD from any screen - you first need to disable Windows...
hi guys,
Built up my HTPC, but am stuck tryign to find a software. Tried heaps, including MCE, GBPVR, Mythtv etc etc.
Simply...
Hi
I can see a lot of thread on issues with Satellite cards. I have a Terratec Cinergy 1200-S and that is a nightmare. Disecq does not work at all and MP finds signal from the card once in a blue moon.
Can somebody indicate references of a card that provide Disecq support + stable quality with MP ?
Thanks
Joce
Hi
I can see a lot of thread on issues with Satellite cards. I have a Terratec Cinergy 1200-S and that is a nightmare. Disecq does...
Hi
I can see a lot of thread on issues with Satellite cards. I have a Terratec Cinergy 1200-S and that is a nightmare. Disecq does...
I am fishing for some information as I'm in the process of trying to setup HDTV with MP.
Ok, this is my setup. Sony Bravia 32" HDTV connected to PVR (MediaPortal 0.2RC4) with DVI - HDMI through my ATI Radeon 9600 256MB Sapphire Atlantis PCIe card.
Currently my screen resolution is set to 1280 x 720 @ 60Hz. Whilst it fills the...
I am fishing for some information as I'm in the process of trying to setup HDTV with MP.
Ok, this is my setup. Sony Bravia 32"...
I am fishing for some information as I'm in the process of trying to setup HDTV with MP.
Ok, this is my setup. Sony Bravia 32"...
Macahan
Please use support template found here
https://forum.team-mediaportal.com/viewtopic.php?t=6438
Then tell us what remote control your using, my mind reading abilities dry up after a beer.
8)
Macahan
Please use support template found here
https://forum.team-mediaportal.com/viewtopic.php?t=6438
Then tell us what...
I have this annoying problem that once I start playing a divx movie, I can't stop it on the remote. I have to stop MP compeletely...
Hagbard
Sorry but a memory and graphic card upgrade would be a really nice improvement on the overall MP experience, and may well solve your locking up on the TV side.
8)
Hagbard
Sorry but a memory and graphic card upgrade would be a really nice improvement on the overall MP experience, and may...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
so is it a shareware or not?
can't understand from the site
so is it a shareware or not?
can't understand from the site
[Please read if you are involved in anything that has to do with: VOLUME CONTROL, TRANSLATIONS, HOME PLUGIN, RADIO, MYPROGRAMS...
It is working now. Just installed the newest version... :-)
It is working now. Just installed the newest version... :-)
How do I turn on visualization when playing music and is there any support for g-force for this? Sorry, couldnt find it.
Thanks!
Hi,
1. i solved the FSK Problem today. With an update of the Alphacrypt Light Modul to the newest version you can disable the FSK check. Now only FSK18+ ist requested; but this is only (as far as i saw till today) on Blue Movie [in which i'm not interested anyway] :-)
But would be better anyway if MP could popup with a PIN-Box...
Hi,
1. i solved the FSK Problem today. With an update of the Alphacrypt Light Modul to the newest version you can disable the...
I know there was pretty much progress in watching encrypted channels via CI and CAM + smartcard.
For me as a german cable user...
I'm using "album cover art downloader" to ad covers to my albums. It would be perfect if a tool like that would be available, that could donwload all information from the internet after entereing the artist name and album.
I have about 30.000 mp3's. About 1/3 of them have no, or incorrect ID3 tags. To much to change by hand. I...
I'm using "album cover art downloader" to ad covers to my albums. It would be perfect if a tool like that would be available, that...
Is there any way to change the default views in mymusic. I know I can set the default view on albums. But I would like to have the...
Same here. I only get right sound using Purevideo.
With all other codecs I get no surround.
Have tested with all codecs and renderers.
Same here. I only get right sound using Purevideo.
With all other codecs I get no surround.
Have tested with all codecs and...
When I play a DVD trough WinDVD I get full sourround sound but when I play it from within MediaPortal I get sound from all of my...
Try going into "My movies" section. There should be a button on the left that says "Play DVD".
Try going into "My movies" section. There should be a button on the left that says "Play DVD".
Is there currently a method to play the DVD from the home/main screen, without opening/closing the DVD tray?
I'm aware of the...
The Hauppauge drivers for the 150 (and the 500 too, I believe) are infamous for their audio problems. Go to http://www.shspvr.com and you'll find lengthy discussions in the forums about audio issues. You'll also find beta drivers in the forum that correct the problems.
The Hauppauge drivers for the 150 (and the 500 too, I believe) are infamous for their audio problems. Go to http://www.shspvr.com...
Been testing MP a bit lately and tried different RC's, I'm currently using RC4 without any SVN updates.
My problem is that on a...
Have a ATI Powercolor 9800SE @ PRO (omega softmod driver) myself using Nvidia codec and it works like a charm :)
Have a ATI Powercolor 9800SE @ PRO (omega softmod driver) myself using Nvidia codec and it works like a charm :)
Hi!
I just installed MediaPortal 0.0.2 RC4 a few days ago and like it a lot, but there is one huge problem with it (at least i...
it works !!!! (don't really know why I am surprised at this)
bombonator/All
Many thanks - downloaded that - and everything is easy, don't know why I had so many problems downloading the file.
Dumb question/suggestion - would it not make sense to include MyBlaster in the list of downloadable plugins ? that was the first place I...
it works !!!! (don't really know why I am surprised at this)
bombonator/All
Many thanks - downloaded that - and everything is...
Hi,
I'm struggling here and hoping someone might be able to point me in the right direction.
I have purchased a Europe MCE...
Thanks Bavarian for developping this VERY usefull small application and of course for publishing my xml file on the website (just saw it has been added) THAAAAAAANKS ! 8)
Thanks Bavarian for developping this VERY usefull small application and of course for publishing my xml file on the website (just...
In the new setup wizard included inside MP (settings/Setup Wizard) there is a dialog in which you can configure automatically all...
Hi all,
does anybody know if that is possible?
I am having:
- Hauppauge Remote
- external Settop Box (D-Box for Premiere in Germany)
- I did setup HCW IR Blaster to switch channels - working perfectly!
Now my question: can I somehow use IR Blaster to send commands to the box besides of the normal channel switching?
My...
Hi all,
does anybody know if that is possible?
I am having:
- Hauppauge Remote
- external Settop Box (D-Box for Premiere in...
Hi all,
does anybody know if that is possible?
I am having:
- Hauppauge Remote
- external Settop Box (D-Box for Premiere in...