Post problems you have when using MediaPortal,
or pre installation questions in here.
The Nova-T 90002 pci has always been a solid performer for me. Unless your short of pci slots I think all internel is a way to go.
The Nova-T 90002 pci has always been a solid performer for me. Unless your short of pci slots I think all internel is a way to go.
Can i just say thankyou to the developers alternitive to media centre. I say alternitive but i think this is much better than...
maurij
Unless You can lend a mce remote and learn direct from its green button signal, there is not a keyboard shortcut that hip could emulate.
8)
maurij
Unless You can lend a mce remote and learn direct from its green button signal, there is not a keyboard shortcut that hip...
Hi there,
Following some problems I decided today to reinstall Windows and MP on my HTPC, I had everything working the way I...
Hi.
I've Mp 0.2RC2 installed. When i try to view my pictures MediaPortal exit to windows and display an error message.
Here is the log of mediaportal:
24/04/2006 22.54.20 Mediaportal:unhandled exception occured
24/04/2006 22.54.20 Mediaportal:unhandled exception occured
24/04/2006 22.54.20 Exception...
Hi.
I've Mp 0.2RC2 installed. When i try to view my pictures MediaPortal exit to windows and display an error message.
Here is...
Hi.
I've Mp 0.2RC2 installed. When i try to view my pictures MediaPortal exit to windows and display an error message.
Here is...
.. might have solution
Having seen a different posting by "petteram", I uninstalled ffdshow (not that I used it), and things seems to have stabilised, ie. My TV now appears to start OK (usually!). I have also found that the "lockup" on exit appears to be caused, strangely enough, by using the codecs supplied with the device (ie...
.. might have solution
Having seen a different posting by "petteram", I uninstalled ffdshow (not that I used it), and things seems...
When I quit MP after watching My TV, and rerun later, it locks up when selecting My TV. I have a MSI MEGASKY 580 USB tuner. I think...
gaellin
I know supposedly ffdshow is all singing all dancing.
But prefer Divx 5.2.1 and Xvid. Both pretty stable.
8)
gaellin
I know supposedly ffdshow is all singing all dancing.
But prefer Divx 5.2.1 and Xvid. Both pretty stable.
8)
Have media portal running fairly stable, right now, except for signal loss on TV channel (another issue). So I followed the...
We don't have it coded to support that.
DMAN
We don't have it coded to support that.
DMAN
Can Mediaportal decrypt channels using a phoenix USB card reader and a legal subscription? The Card reader is connected directly to...
I thought Hyper-Threading doesn't really matter on dual core CPU since this technology is just trying to emulate a double core by splitting up some processes. But i'm not really sure about this.
Regarding the motherboards I have to check first, since normally i'm not a fan of Intel CPUs.
But due to the problems csberto...
I thought Hyper-Threading doesn't really matter on dual core CPU since this technology is just trying to emulate a double core by...
Hello colleagues
I was just thinking about buying a new CPU for my media center.
Now I've seen that Intel is selling a new...
This doesn't work for me!
But thank you all for helping!
Software now uninstalled :(
This doesn't work for me!
But thank you all for helping!
Software now uninstalled :(
Hi!
I just installed Media Portal. It looks great, but I cannot see any TV. Although the system seems to find channels, the...
The show icon is only displayed in the recorded TV section. It won't show up on the EPG.
The show icon is only displayed in the recorded TV section. It won't show up on the EPG.
I finally got images for all of my channels.
I see there is another directory named 'shows'.
Does this fnction work? I added...
Software cards (such as the analogue portion of your card) is no longer generally supported. It must be exclusively supported now much like the hardware cards so if it hasnt been added, youll need to do it. You also need to install software mpeg2 encoders as well as MP now only supports the mpeg2 format (or more specifically dvr-ms)...
Software cards (such as the analogue portion of your card) is no longer generally supported. It must be exclusively supported now...
The Pinnacle 310i (not the TNT- Version!) can receive analog TV, DVB-T and FM-Radio.
With the new MP RC4 finally I can use the...
Its just Windows... ;-)
Its just Windows... ;-)
I have a interesting problem with rc4. After about 20 minutes of watching a video the screen goes black. If I press a button on...
me too :wink:
me too :wink:
hI i'M A NEWBIE FOR THIS GREAT PRODUCT.
I installed the latest release RC3 and also the latest xcard drivers (not that new) ...
I finally got Mediaportal to work with my Harmony 880 and with the internal programs it works well enough.
My issue is that for Mkv files I want to use MediaPlayer Classic since it understands Mkv chapters.
If I were to continue as is with the MediaPortal internal parts, but wanted to use girder for the externals will this cause...
I finally got Mediaportal to work with my Harmony 880 and with the internal programs it works well enough.
My issue is that for...
I finally got Mediaportal to work with my Harmony 880 and with the internal programs it works well enough.
My issue is that for...
Got it working! found exactly why it wasnt working properly, damn IR port on my laptop was enabled (didnt know id even reinstalled the drivers x.x) tried it after turning it off and it works perfectly.
Im now in the process of sorting out all my channel information and giving it a test, thanks for the help guys :)
Got it working! found exactly why it wasnt working properly, damn IR port on my laptop was enabled (didnt know id even reinstalled...
I want to set MP to be able to forward my MCE remote signals to my external sky box so I can change the channels and navigate MP...
The Remote is a Imon Pad and is pretty easy to include in MP. (there is a thread or two about this remote)
The LCD is the Soundgraph VFD and IS supported by MP.
The Remote is a Imon Pad and is pretty easy to include in MP. (there is a thread or two about this remote)
The LCD is the...
http://www.guru3d.com/article/cases/324/10/
Yes. That beautiful case and it's remote (lcd display). Now that's what I call a HTPC
bruno
Due to the logical limitations of windows you will have to label episodes 01, 02, 03 etc.
8)
bruno
Due to the logical limitations of windows you will have to label episodes 01, 02, 03 etc.
8)
Hi Guys (and ev Girls)
Since I'm a newbie to MP this question might be stupid.. However if not asked I don't know if it's...
Hi,
thanks - but in my case it does not help. Whenever it finds the first time a frequency with programs in it, it crashes.
I will wait for an update on the BDA driver...
Martin
Hi,
thanks - but in my case it does not help. Whenever it finds the first time a frequency with programs in it, it crashes.
I...
Area: Media Portal Configuration Prog
MediaPortal Version: 0.1.3.0 (2005-07-16)
MediaPortal Skin: mce
Windows Version: Windows...
Sorry, should have said I'm using RC4 without any updates.
Sorry, should have said I'm using RC4 without any updates.
Hi,
Who can help me?
I have a problem with my FireDTV (cable) remote controller and MP :x
It is not possible to use the...
Hi,
I'll try to develop a program (with WMencoder, too) that, at clean startup (not resume, etc), wakes up the Hauppauge recorder (only for five seconds) then closes itself and starts MP..
By this way perhaps in MP the Tv will work also at first boot, without open and close MCE Tv...
Dado
Hi,
I'll try to develop a program (with WMencoder, too) that, at clean startup (not resume, etc), wakes up the Hauppauge recorder...
I installed the latest CVS on my system and now I cant get my tv to work. The picture is totaly black. When I press the tv on...
deleted
deleted
I am having some problems with my WinFast TV 2000 XP Card when I am using it in MediaPortal.
1. I cannnot get the pause, stop...
Thanks scoop,
I also figured out how to lock it to channel 4. It was just buried in a configuration page.
~Steve
Thanks scoop,
I also figured out how to lock it to channel 4. It was just buried in a configuration page.
~Steve
Hi guys,
I've searched around for how to do this, but I can't seem to find a thread with all of the information, just hints. I...
poppy10
Ask Microsoft why they do anything. :wink:
8)
poppy10
Ask Microsoft why they do anything. :wink:
8)
i updated to the latest SVN last night and found after doing that the DVR-MS files are only about 9kb in size and hidden is another...
HMMM interesting.
HMMM interesting.
I think it means with a videofile what part of the video your up to. But when watching TV what does it mean ?
I have...
Hey.. since i've never run into this, i was wondering if MP's recorder has the ability to spot "rerun" tags in the guide data. ie.. record only first runs, reruns..
thanx..
Hey.. since i've never run into this, i was wondering if MP's recorder has the ability to spot "rerun" tags in the guide data. ie...
Hey.. since i've never run into this, i was wondering if MP's recorder has the ability to spot "rerun" tags in the guide data. ie...
I have been able to get the remote to work using The Girder program;
http://www.softpedia.com/get/System/Launchers-Shutdown-Tools/Girder.shtml
and using a media portal plugin with Girder from here;
http://www.promixis.com/downloads.php?mode=list&prodName=Girder+4
I have been able to get the remote to work using The Girder program...
Area: Media Portal Program
MP Version: RC4
Skin: MCE
Windows Version: XP Pro + SP2
CPU Type: AMD Athlon3000+ @ 2.2Ghz
Memory...
Hi!
Paranoid Delusion asked me to post my problem her (originally posted in General Support). I think I might have got a hardware problem.
I'm using a PCTV 100e (USB2) card from Pinnacle. I cannot get this to work with Media Portal. The result is a black screen. But... the card works properly with its original software from...
Hi!
Paranoid Delusion asked me to post my problem her (originally posted in General Support). I think I might have got a...
Hi!
Paranoid Delusion asked me to post my problem her (originally posted in General Support). I think I might have got a...
https://forum.team-mediaportal.com/viewtopic.php?t=14616
ok i think this is the same problem that i have...
https://forum.team-mediaportal.com/viewtopic.php?t=14616
ok i think this is the same problem that i have...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
hah, this got me as well. Thanks for pointing this out.
jW
hah, this got me as well. Thanks for pointing this out.
jW
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
Please read this post in the Digital everywhere forum:
http://www.firedtv.com/Forums/tabid/311/forumid/28/postid/544/view/topic/Default.aspx
Please read this post in the Digital everywhere forum...
blank I have a floppy dtv s ci, than type of codec I must install in order to see channels MPEG 4? thanks
My Gigabyte 6600GT Heatpipe doesnt make a sound.
Most GF from 5200 to 6200 is fanless.
My Gigabyte 6600GT Heatpipe doesnt make a sound.
Most GF from 5200 to 6200 is fanless.
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...