Post problems you have when using MediaPortal,
or pre installation questions in here.
Hi Tech Geek,
VIA is the manufactor of the EPIA board series. ;)
These are integrated boards with own chipset, CPU and graphics.
But mostly I am blaming S3, who are responsible for the UniChrome graphics. And the cooperation between VIA and S3. They were simply not capable to deliver a good firmware / driver combination for...
Hi Tech Geek,
VIA is the manufactor of the EPIA board series. ;)
These are integrated boards with own chipset, CPU and...
Hi,
I'm starting building my first "real" HTPC. I've been looking at the newly or soon to be released Via SP8000E motherboard...
Please disregard this problem, as I have finally fixed it!
In the end, I not only uninstalled MP through Add/Remove Programs, but I also deleted the folder. Then I installed a fresh RC3. This caused me to have to completely redo my setup, but it was worth it to get color TV back.
:D
Please disregard this problem, as I have finally fixed it!
In the end, I not only uninstalled MP through Add/Remove Programs...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: MetalMedia
Windows Version: Windows...
I have primary monitor with 1600x1200 res. and secondary LCD TV in 720p HDTV res. Nvidia display driver is set to Dualview. The problem is the same even I run MP on primary or secondary monitor.
I have primary monitor with 1600x1200 res. and secondary LCD TV in 720p HDTV res. Nvidia display driver is set to Dualview. The...
Hello,
Is it possilbe to change resolution for live tv and dvr-ms recording ? My mediaportal record and display live tv in the...
I had the same problem on my Via Epia SP 13000 - using exclusive directx mode caused a black screen in full screen video and thus I suffered tearing. Reinstalling the video drivers made no difference for me however updating the BIOS to version 1.07 unexpectedly fixed the problem in my case and the tearing problem is resolved.
K.
I had the same problem on my Via Epia SP 13000 - using exclusive directx mode caused a black screen in full screen video and thus I...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-12)
MediaPortal Skin: RealMP
Windows Version: Windows XP...
Well, good news! The remote I got with the TV-card actually was a Euro-version, allthough not a backlit one. So, I got what I wanted.
Well, good news! The remote I got with the TV-card actually was a Euro-version, allthough not a backlit one. So, I got what I wanted.
Perhaps this has already been answered but at least I didn't manage to find the information so I ask.
I've built myself a HTPC...
I just downloaded some samples from various websites.
I just downloaded some samples from various websites.
I've managed to get my HTPC playing .TS files in PowerDVD and Windows Media Player, but whenever I try to play them in MediaPortal...
search function is wonderful!
You may want to use the search function for your question.
But basically what you need is a CM11 or like device to receive the x10 command on the MP machine. Next map the incoming x10 signal to a MP gui command. You might want to take a look at the x10 dummy plugin 8)
hope this gets you on your...
search function is wonderful!
You may want to use the search function for your question.
But basically what you need is a CM11...
Hi Folks
Did try searching but couldn't find anything.
Basically, I am using X10 for some basic home automation and would...
The screen saver is disassable.
I know that after 10 secs the voip program disapear and it is back MP.
The screen saver is disassable.
I know that after 10 secs the voip program disapear and it is back MP.
I use Voipbuster insted Skyp. There are no plugin for Voip I run it from My Programas but after 10 seconds the voip goes to back...
Hi,
Using: 0.2RC3 + mediaportal-svn-04-08-2006--00-52
It's only the BlueTwo (Default) skin that is always updated with SVN releases. Try also to use a screen resolution of 800x600 when testing & post back the log + specs when error occurs
I have no problems with this skin (default BlueTwo) when using visualization in...
Hi,
Using: 0.2RC3 + mediaportal-svn-04-08-2006--00-52
It's only the BlueTwo (Default) skin that is always updated with SVN...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3$CVS-26.03.2006- 1:04:28,93
(2006-03-26)
MediaPortal Skin: RealMP...
I had to make this change to the original to get it to work with RC3
<Profile Type="SnapStream.Firefly.Core.Profile" Name="Media Portal" ShowOSD="True">
<Identifier WindowText="MediaPortal" FileName="MediaPortal.exe" />
I had to make this change to the original to get it to work with RC3
<Profile Type="SnapStream.Firefly.Core.Profile" Name="Media...
I coded up this profile for those out there that has the FireFly Remote. Copy/paste below the line and save file as...
You have to push "Play" button and not the "Enter" or "OK" button.
You have to push "Play" button and not the "Enter" or "OK" button.
Have select go to Now playing in setup for MyMusic..
But nothing happens when I start the music file... Have to go to this...
Thanks guys, yes it is a foxtel pace420. I will give these a try.
Thanks guys, yes it is a foxtel pace420. I will give these a try.
I have seen reports of a new MyBlaster for RC3 but can't find it on the MP site anywhere. There is also mention of a special dat...
Yes, that's correct.
Yes, that's correct.
Ok, I got some feedback to open a thread in the official forum and so here we are. You can grab the latest unofficial snapshot...
with regards to the trailers i forget to add teh extensions! DOH!!!!
But as for the update i follow the steps of Start.Bat. then configure but it makes no difference
with regards to the trailers i forget to add teh extensions! DOH!!!!
But as for the update i follow the steps of Start.Bat. then...
hey there, im having 2 issues with MP now.
It wont seem to play HDMOV files on MP. Ive got quicktime alternative installed but it...
Ver: RC3 - 0.2.0
skin: BlueTwo
plugin: MyPictures
Three items. One seems to be a bug, the other is an annoyance, the last is a feature request.
1) Using the keyboard or mouse - Scroll into a folder. Change View: to a different view (other than list) and scroll back up a level then down into NEW folder (one that you have not...
Ver: RC3 - 0.2.0
skin: BlueTwo
plugin: MyPictures
Three items. One seems to be a bug, the other is an annoyance, the last is a...
Ver: RC3 - 0.2.0
skin: BlueTwo
plugin: MyPictures
Three items. One seems to be a bug, the other is an annoyance, the last is a...
My suggestion is to clone displays. Turn off "MP Fullscreen" and "MP always on top" in MP config.
Switch displays to clone and auto maximise overlay screens on the TV display.
The only downside with this is that you can't play games at the same time as watch MP. You can watch MP fullscreen on the TV and use the computer for net...
My suggestion is to clone displays. Turn off "MP Fullscreen" and "MP always on top" in MP config.
Switch displays to clone and...
Hi,
I would like to add HTPC capabilities to my existing PC. I have a 6600GT gfx card. I'd like to use the PC for general...
Yeah I would think the 6200 should be powerful enough. Could you please tell me which codecs you are using.
Yeah I would think the 6200 should be powerful enough. Could you please tell me which codecs you are using.
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3$CVS-26.03.2006- 1:04:28,93
(2006-03-26)
MediaPortal Skin: MCE...
no one wants to answer as it is legally a very touchy subject.
Splitting one card to allow you to decode two channels technically is illegal and you could not do it normally I believe.
no one wants to answer as it is legally a very touchy subject.
Splitting one card to allow you to decode two channels...
Hi i have legal pay card... its possible some how share that for 2 dvb-s tuners one(twinhan ci) have ci slot other(ss2) not thnc
same problem
Hi,
I didn´t find a thing about this, because i´m having the same problem.
Could somebody help please.
Ciao, yours Macs!
same problem
Hi,
I didn´t find a thing about this, because i´m having the same problem.
Could somebody help please.
Ciao...
the auto tune is not working at all,
it can not find any channel, but if I add them manually it works!
are there any precompiled...
Just wanted to update you wityh some happy news :)
I have installed RC3 again and running with newest SVN, and it is really running smoothly for me now!
I have enabled "Exclusive DX mode" in config.exe and this has really helped on speed and responsiveness of MP.
I (Still) think it's a great app, and I will donate as soon as...
Just wanted to update you wityh some happy news :)
I have installed RC3 again and running with newest SVN, and it is really...
Hello guys...
Although MP is a great app, I'm forced to switch back to RC2 for things to work for me.
I'm having the...
I did search, but apparently not well enough - thnx for your help!
Can't wait to try it out ;)
I did search, but apparently not well enough - thnx for your help!
Can't wait to try it out ;)
Hey there
Very new to MediaPortal - just built my first HTPC in a Silverstone LC16M case, which has the iMon remote included...
Can you explain keyboard on screen!
MP requires remote/keyboard, either will work.
If you want all the keyboard shortcuts see support\wiki
8)
Can you explain keyboard on screen!
MP requires remote/keyboard, either will work.
If you want all the keyboard shortcuts see...
Hi! Have installed Media Portal. Fantastic program. I am now having problems with my burning programs, Alkohol 120% and Nero. The...
FlipGer, Thank you very much.
I hope i can download a patch or new version with my card supported very shot!...
Regards.
FlipGer, Thank you very much.
I hope i can download a patch or new version with my card supported very shot!...
Regards.
Hi, i'm new in this forum.
I post this message cause i dont know if i'm alone with this issue.
I have the TV Card USB adapter...
That's to bad that would be very handy....
But thanks for the reply.
That's to bad that would be very handy....
But thanks for the reply.
I'm using Myblaster to control my stp and now i wonder if i can switch modes on my receiver when i enter different menus.
1...
Hi,
I use a PVR 150 and 350 and do also run into "no signal" from time to time. :(
It got a bit better with latest CVS version although. So I think your twinhan should also benefit from that. You may also try different codecs. I get less no signal with DScaler for example, but the image quality of the MPEG2Dec is much better. So...
Hi,
I use a PVR 150 and 350 and do also run into "no signal" from time to time. :(
It got a bit better with latest CVS...
I'm curious to know this since (from what I understand) MP is written primarly for use with Hauppage cards in mind, or something to...
Found the problem : reverted back to my old TV tuner driver (1.3.3.0 i.s.o. the newest 1.3.3.1g), and it works again.
Found the problem : reverted back to my old TV tuner driver (1.3.3.0 i.s.o. the newest 1.3.3.1g), and it works again.
Strange, a few months ago I managed to get MP RC2 working, with the help of DMAN. Also the first RC3 was working.
See this...
Have a look at how I solved running on secondary display:
https://forum.team-mediaportal.com/viewtopic.php?t=12088&highlight=
Basically: switch to ATI hardware on secondary and maximize, do not run full screen.
Have a look at how I solved running on secondary display:
https://forum.team-mediaportal.com/viewtopic.php?t=12088&highlight=...
Hi
I'm totaly new to media portal.
I want to run Media portal on the second monitor (LCD TV) on my system, but as soon as I...
You can't, you'd have to modify source code for that.
You can't, you'd have to modify source code for that.
When mapping the action_aspect_ratio function to a key I can switch between the different ratio modes Normal, Original, Letterbox...
I don't know if this helps but here is my recorder.bak log file. I pressed the "Live TV" button at 12:10:00 to turn the card on. It didn't initialize until 12:11:11 or 71078.125 msec as the log states.
4/6/2006 12:08:04 AM Recorder: card:1 video device:Hauppauge WinTV PVR PCI II Capture TV:True record:True priority:8...
I don't know if this helps but here is my recorder.bak log file. I pressed the "Live TV" button at 12:10:00 to turn the card on...
Hi,
I've been running the latest CVS's for a while and a week or two ago I picked up a problem whereby the first time I tune to...
Hi,
for the static please look here:
http://mediaportal.elite-squad.net/forum/showthread.php?t=497
And if possible try to confirm the bug (so it can get into mantis).
And on that way you may also take a look into this:
http://mediaportal.elite-squad.net/forum/showthread.php?t=520
Would be really great! :)
Its somewhat...
Hi,
for the static please look here:
http://mediaportal.elite-squad.net/forum/showthread.php?t=497
And if possible try to...
Hi all!
As soon as I start to capture TV-signals with my Hauppauge PVR-500 the computer crashes. I have tried a number of...