General Support (81 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
add the channels again in setup Hi, had the same problem. Go to Setup and re-enter the frequencies for the channels even if the channels seem to be correct. That helped in my case. Perhaps try a few first and tune in. /HTH Gerd
add the channels again in setup Hi, had the same problem. Go to Setup and re-enter the frequencies for the channels even if the...
I downloaded the latest build and had set ut up with my new Hauppauge PVR 350 card. I can autotune fine "see the little preview of...
Replies
3
Views
1K
MP1 MP2 IR operation DE
I need to change channels on a foxtel digital stb and a transact (cable) stb. I can get transact to work using mce blaster and myblaster plugin but the MP program only appears to support 1 blaster channel. i.e it only loads ir codes for port 1 and always sends on port 1. I can also get transact to work via HIP (after some advice from...
I need to change channels on a foxtel digital stb and a transact (cable) stb. I can get transact to work using mce blaster and...
I need to change channels on a foxtel digital stb and a transact (cable) stb. I can get transact to work using mce blaster and...
Replies
0
Views
1K
Hi all! I am running MP on my main TV, and I am very satisfied with it. Now, I have set up a second TV where I would like to be able to access as much as possible from the MP server. Most importanly, recorded videos and music should be accessible. However, if I can also access MyPictures, MyWeather, MyTrailers, etc that would...
Hi all! I am running MP on my main TV, and I am very satisfied with it. Now, I have set up a second TV where I would like to be...
Hi all! I am running MP on my main TV, and I am very satisfied with it. Now, I have set up a second TV where I would like to be...
Replies
0
Views
836
If I use Tv with Time-shift everything is ok images and audio are smooth and continuous. If I watch TV without time shift I get images Ok and smooth but not the same for audio. Infact if I don't use time shift the audio results with some very short interruptions every 1 or 2 or 3or 4 seconds. Since if I don't need time shift I prefer...
If I use Tv with Time-shift everything is ok images and audio are smooth and continuous. If I watch TV without time shift I get...
If I use Tv with Time-shift everything is ok images and audio are smooth and continuous. If I watch TV without time shift I get...
Replies
0
Views
820
o that is sweet, thanks Teebor, i just tried the Web interface to schedule recordings from here at work when i'm not at home, its damn sweet, well done to the devs who did that part, cause that rocks
o that is sweet, thanks Teebor, i just tried the Web interface to schedule recordings from here at work when i'm not at home, its...
If anyone can answer this question i have, if i have a scheduled recording to go off at a set time but i dont' actually have myTV...
Replies
2
Views
764
I did a search as you suggested and it does seem to be a wide ranging windows problem (surprise surprise LOL) However I did find a kb article that had a fix which may or may not resolve the problem, I haven't tried it yet as I experimented with something else tonight. I recorded three programs tonight which meant both tv tuners...
I did a search as you suggested and it does seem to be a wide ranging windows problem (surprise surprise LOL) However I did find a...
Is there any information for people who have no clue (like myself) about hooking up a computer to your tv/home entertainment...
Replies
23
Views
4K
I too have this card, slightly offtopic, but did you manage to get the remote to work? The Ulead software distributed with the card is extremely slow to load for me, and doesn't play DVD's, or Music. Seems strange that the remote has all these buttons and many of them do not work.
I too have this card, slightly offtopic, but did you manage to get the remote to work? The Ulead software distributed with the...
:( I´m spanish and not speack english... :( But, in 0.1.3.0 work perfect and autotune perfect. In RC2 not autotune, not work not...
Replies
4
Views
1K
Hi. I setup a directory browse to my .iso-files, but when I open them in MP, the files mount, pop up an explorer window and in MP I get the dir-structure. I can't get the emulator to start. I have the switches allright I think (-openiso or what it was, I actually found a preprogrammed setting in my programs setup.) /Niclas
Hi. I setup a directory browse to my .iso-files, but when I open them in MP, the files mount, pop up an explorer window and in MP I...
I have a problem, which I can't suss out! :? I've setup epsxe within mediaportal, which works fine. But when I want to...
Replies
2
Views
1K
voxmortis: did you find, test and adopt the Autostart plugin? (there is a new version now!) thanks+regards WeWe
voxmortis: did you find, test and adopt the Autostart plugin? (there is a new version now!) thanks+regards WeWe
I would like to start viewing TV when windows boots up. Now when windows boots MP is started and i see the default menu with the...
Replies
3
Views
2K
MP1 MP2 Roadmap to MP 1.0 ? DE
I know it is very difficult to say what features will be implemented. But that is not my reason for this topic. With MP 0.2 you make a huge step to a very good software (maybe you are still there :wink: ) With version 0.2 there are features most other Media-Center-Software has (maybe already more). Therefor I would like to know...
I know it is very difficult to say what features will be implemented. But that is not my reason for this topic. With MP 0.2 you...
I know it is very difficult to say what features will be implemented. But that is not my reason for this topic. With MP 0.2 you...
Replies
0
Views
925
Stay away fom software cards, they are not worth the couple of $$$ you save. I have a winfast (Leadtek) PVR2000 which is an H/W card and also the poorest performing card in my collection of TV tuner cards. If you want to go analog, then go for Hauppauge PVR150 or PVR500 This is the list of cards I own + my rating of these...
Stay away fom software cards, they are not worth the couple of $$$ you save. I have a winfast (Leadtek) PVR2000 which is an H/W...
I was a member ages ago but never got around to getting my HTPC project underway. Now i noticed TV cards have dropped in price, so...
Replies
4
Views
1K
Thanks I will try that. Thanks!
Thanks I will try that. Thanks!
Hi, Have configured MP to use PureVideo decoder for TV and DVD. Installed version 1.02.196. When playing DVD the Windows...
Replies
2
Views
2K
MP1 MP2 Sound problem DE
Ya sorry, I wasn't sure where I should post this. Yes I have several other devices, CD, DVD, Directv Box ect hooked up to the receiver and the volume on them works just fine. I have also tried different cords Different PC with different sound cards and motherboards (Sound cards were Soundblaster Live Value and Soundblaster Live...
Ya sorry, I wasn't sure where I should post this. Yes I have several other devices, CD, DVD, Directv Box ect hooked up to the...
This isint exactly a MP problem as it happens with any pc I have running any software. The problem is no matter what PC I hook up...
Replies
2
Views
1K
Hello after 1 hour in mytv when I record there is not audio. Please help me there is not error log, this is my configuration MediaPortal Version: 0.2.0.0 RC3 (2006-03-29) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2) .NET CLR Version: 2.0.50727 DirectX Version: 4.09.00.0904 (9.0c) Audio Codec: InterVideo...
Hello after 1 hour in mytv when I record there is not audio. Please help me there is not error log, this is my configuration...
Hello after 1 hour in mytv when I record there is not audio. Please help me there is not error log, this is my configuration...
Replies
0
Views
970
In chatting on IRC decided it was a card driver issue.
In chatting on IRC decided it was a card driver issue.
I have been testing MP RC3, and decided to try pausing TV. I noticed my timeshifting option in MyTV is greyed out. How do I get...
Replies
2
Views
839
as much as i like the euro version of the remote, i couldn't pass up this deal. I got the MCE remote for 20 usd shipped on ebay. Once events are programmable i don't see the big problem.
as much as i like the euro version of the remote, i couldn't pass up this deal. I got the MCE remote for 20 usd shipped on ebay...
Hi I recently purchased a USA MCE remote and for the most part mediaportal works great with it! It actually works smoother and...
Replies
6
Views
1K
Okay not perfect. Looks like my MP3 problem has something to do with the skin selected. Using the Project X skin it music seems to work better. Using any other skin looks like it causes problems to slow reponse to complete lockups.
Okay not perfect. Looks like my MP3 problem has something to do with the skin selected. Using the Project X skin it music seems...
Greetings. I've currently rolled back to RC1 from RC3 because of the problems I'm having with RC3. I've been digging throught the...
Replies
2
Views
1K
ok.. i tried it anyways, and it told me that it couldnt find any dvbt cards on my machin which is normal since there are none. My card is a regular oem Asus PVR card that came shipped with my HP m1070n. This shouldnt be THIS hard to fix!! it worked with RC2 cvs-01-10-2006--01-04 and the next cvs it didnt, and hasnt since!.. SOooo...
ok.. i tried it anyways, and it told me that it couldnt find any dvbt cards on my machin which is normal since there are none. My...
Hi Dman.. here is my log from RC3. http://pastebin.com/630051 This log is from right after i try to add a new card in the config...
Replies
6
Views
2K
MP1 MP2 Remote wonder DE
Works great now thanks :)
Works great now thanks :)
I used to use the old Remote Wonder plugin, now media portal supports the Remote natively, however, if I use the remote natively...
Replies
5
Views
2K
Yes, definitely! The hardware encoder converts the analogue video frames into the MPEG2 stream, and then the SBE writes it to disk as a DVR-MS file. Yes, the tuner is doing its best to "save CPU cycles". If you monitor the CPU% usage while recording a TV program (but not watching TV at the same time) you will see that the CPU% is...
Yes, definitely! The hardware encoder converts the analogue video frames into the MPEG2 stream, and then the SBE writes it to disk...
I have had something on my mind a while now and was unable to find anything about it on the forums here. If I missed a previous...
Replies
4
Views
1K
Area: Media Portal Program MP Version: 2 RC3 Skin: the skin you use Windows Version: XP Pro CPU Type: AMD 3500 64 Memory: 1024 DDR Motherboard Chipset: Gigabyte Nvidia Nforce 4 Video Card: Nvidia 6600 Video Card Driver: ? Latest Video Card Resolution: 1280 * 1024 Video Render Type: ? Video Codec Type & Version: ? Audio...
Area: Media Portal Program MP Version: 2 RC3 Skin: the skin you use Windows Version: XP Pro CPU Type: AMD 3500 64 Memory...
Area: Media Portal Program MP Version: 2 RC3 Skin: the skin you use Windows Version: XP Pro CPU Type: AMD 3500 64 Memory...
Replies
0
Views
1K
GoldenEye Thanks for you concern. I had it working all the way up to 0.1.3 so I know how it works. The problem now is the remote only searches on the first letter (see links in my previous post), version 0.1.3 I was able to search on more than one letter. The funny thing; it is working when I use my keyboard with the shift-key...
GoldenEye Thanks for you concern. I had it working all the way up to 0.1.3 so I know how it works. The problem now is the...
Hi, I was wondering if there were any plugins available so that you can perform a search for music rather than havin to look...
Replies
6
Views
2K
MP1 MP2 MyMusic questions DE
Thank you for the reference. Yes I have found what I need: 12.) [DONE] Ability to "Play this share" "Play this album", "Play this artist" So I guess I just have to download the latest CVS and start betatesting. :)
Thank you for the reference. Yes I have found what I need: 12.) [DONE] Ability to "Play this share" "Play this album", "Play...
Hi I am having problems getting satisfied results from the MyMusic part of MediaPortal. First I am having problems being able to...
Replies
2
Views
907
Use either the timezone correction in your EPG grabber or in the MP configuration under Program Guide.
Use either the timezone correction in your EPG grabber or in the MP configuration under Program Guide.
The TV Guide is off by about 5 hours when selecting a show? Anyone have any idea how to fix this?
Replies
1
Views
897
In full screen video, the blue button changes the aspect ration and the green button simply emulates the big start button.
In full screen video, the blue button changes the aspect ration and the green button simply emulates the big start button.
With the MCE Microsoft remote, which button do you have to press for the context menus (like the one below). I mean the menus you...
Replies
5
Views
1K
Nice 8) 8) 8)
Nice 8) 8) 8)
I'd like NOT to use the Music Database at all. No indexing, no reading tags what so ever. However, no matter how often I uncheck...
Replies
13
Views
2K
CVS is down so I cannot update it yet. DMAN
CVS is down so I cannot update it yet. DMAN
Area: Media Portal Program MediaPortal Version: 0.2.0.0 RC3$CVS-30.03.2006- 1:02:33,92 (2006-03-30) MediaPortal Skin: mce...
Replies
1
Views
1K
MP1 MP2 blank screen DE
Have you got Windows Media player 9 or 10 installed. I take it you have installed XP as found T23 came with Windows 2000 originally. 8)
Have you got Windows Media player 9 or 10 installed. I take it you have installed XP as found T23 came with Windows 2000...
Hi guys I am keen to test mediaportal. I have an ibm T23 notebook running xp pro it has all the ms updates and packages needed...
Replies
3
Views
2K
MP1 MP2 Optimal Settings DE
Cool. I should add that I have a Nokia 440xi Plus 21" monitor, AudioPCI and Boston Acoustics sound. One question, probably been answered but what the hey, how many simultaneous recordings can you do while still being able to view video/dvd or TV? Side note: Got a few monitors and 4 spare video cards so I am going to try a...
Cool. I should add that I have a Nokia 440xi Plus 21" monitor, AudioPCI and Boston Acoustics sound. One question, probably...
Putting this post under software apparently didn't work so I'm posing it here. I'm sure these questions have been answered...
Replies
2
Views
2K
Hi, Set up the Album view as you want in MP setup -> Music -> Music Views & then select Albums. Use the ViewAs to set the view you want to have, save & then load MP go to MyMusic. If it’s not the correct select “switch view†& then select Album view. Hope this helps you. Regards Roy
Hi, Set up the Album view as you want in MP setup -> Music -> Music Views & then select Albums. Use the ViewAs to set the view...
Is it possible to show the default view for Music as 'Abbums' from the DB and displayed as 'Icons'? I can make it show Icons by...
Replies
2
Views
1K
Top Bottom