Post problems you have when using MediaPortal,
or pre installation questions in here.
Thanks
I can see that there is at least some progress in the area...
Thanks
I can see that there is at least some progress in the area...
Hi, have a dvb-t card without a ci-module (Pinnacle 310i).
I also have a Boxer-card for a lot of aditional channels (Boxer=dvb-t...
Hi. I am new to MP and so not sure if I have missed something in the setup. I have set up my system with two PVR150 cards. One of the cards has an external antenna connected and the other has my pay TV satelite set top box connected via the antenna socket.
My problem is that my TV stations via the external antenna range from channel...
Hi. I am new to MP and so not sure if I have missed something in the setup. I have set up my system with two PVR150 cards. One of...
Hi. I am new to MP and so not sure if I have missed something in the setup. I have set up my system with two PVR150 cards. One of...
Angel Dual TV Tuner
I have the same tuner (except the pci version) and I cannot get it to even be detected in the 0.2.0.0 RC3 version.
http://www.lumanate.com/Htm/sptAngelPCI.htm
I sent an email to dman_lfc@hotmail... per the instructions for "getting your h/w card to work.
Is there anyone else I should be sending it to? Is...
Angel Dual TV Tuner
I have the same tuner (except the pci version) and I cannot get it to even be detected in the 0.2.0.0 RC3...
i can not seem to get my dell angel usb tv tuner to work w/ media portal the program recognizes the device but all i get is a...
Post your MediaPortal.log after trying an autotune.
DMAN
Post your MediaPortal.log after trying an autotune.
DMAN
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-03-16)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
awesome, that is very useful
many thanks
awesome, that is very useful
many thanks
is there a keyboard shortcut to close mediaportal?
thanks
I guess the higher res could have been too much for your gfx card.
800x600 should be fine though.
You may also want to install v2 of dot net now. Keep 1.1 as well though.
Channels were quite fast for a while, but slowed a bit with the last few weeks worth of CVS. It's part of the price for being "Cutting Edge" :)
I guess the higher res could have been too much for your gfx card.
800x600 should be fine though.
You may also want to install...
Area: Media Portal Program
MediaPortal Version: 0.1.3.0 (2005-07-16)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
Searching the forum for MCE remote drivers should be the first thing to try...
Searching the forum for MCE remote drivers should be the first thing to try...
Bought a mce remote expecting that this would work fine using mediaportal on my oem xp home.
But after some searching it looks...
http://www.tfttest.fromru.com/tfttest.zip
I use this to have some reference screens. It's far from perfect but can helps.
http://www.tfttest.fromru.com/tfttest.zip
I use this to have some reference screens. It's far from perfect but can helps.
Does anyone know where to get FREEEEE software to properly calibrate my Tv?
Also it would be nice if MP would include such a...
I have also been looking at the PCI-e dual DVB-T card from Terratec and wondered about the same questions as you did.
Is the remote control RF? What a shame :( Then i can't use it i guess... Media Portal is running on my Windows Server 2003 in the basement, so im not sure af a RF remote can reach all the way down there.
I have also been looking at the PCI-e dual DVB-T card from Terratec and wondered about the same questions as you did.
Is the...
HI,
I'm new and first post and all, I have been using Media Portal for oh,, 20 minutes now. And from all appearences its good...
You found a bug! :lol:
It's fixed in the next CVS builds. Be sure to reset to default mappings, if it's not working as expected.
You found a bug! :lol:
It's fixed in the next CVS builds. Be sure to reset to default mappings, if it's not working as expected.
Hi there
I have been a happy user for MediaPortal for the last 2 months. But I am having problems with the WAF factor (Wife...
It is both analog and digital.
Bad thing is that the analog part is software encoded which means your cpu
will do all the work, unlike the digital part where the card itself do all the work.
If you take a look at the HRV-1300, its also a hybrid card, but both
the analog and digital part is hardware encoded...
It is both analog and digital.
Bad thing is that the analog part is software encoded which means your cpu
will do all the work...
Hey guys, just found this piece of software and i must say it rocks. Only thing im having issues with is the TV side of things...
Ah, thank you for the explanation. Happier now. :)
Ah, thank you for the explanation. Happier now. :)
Hi,
With the RC2 version i get a new icon in my taskbar. Its like a blue wheel and says "Media Portal HCW Control". Sometimes, i...
A hybrid card means it can tune both analogue and digital frequencies. You can get other cards which have analogue inputs but cant only tune into the video input.
A hybrid card means it can tune both analogue and digital frequencies. You can get other cards which have analogue inputs but cant...
I have the WinTV-HVR-1100 Hybrid card. Unfortunately i am VERY new to this TV card thing and i wanna know what Hybrid actually is...
Not more than what's written on that page, no.
Myself, I will wait until someone launches a DVB-S2 card which does hardware encoding. I've read some reviews on the other DVB-S2 card available (KNC-one) and it's said to require ~Dual core P4 3.2GHz to play smoothly. Now since such a processor costs ~400€ (plus the dvb-card ~150€)...
Not more than what's written on that page, no.
Myself, I will wait until someone launches a DVB-S2 card which does hardware...
http://www.dvbshop.net/product_info.php?info=p145_Technotrend-S2-3200-HDTV-S2.html
Does anyone, know more about this card...
As the video card was my main suspect, I went out and bought an ATI X1300 card, and has had no problems since then.
So it was the video. I have the reporting tool, but it does no say if I run Overlay or VMW9 mode (on any of the cards)
As the video card was my main suspect, I went out and bought an ATI X1300 card, and has had no problems since then.
So it was...
Hi,
I like MediaCenter, but I suffer from major sowdown, 100% usage etc when there is any text overlay on the TV picture, and...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: InterVideo Audio Decoder for TechnoTrend
Video Codec: InterVideo Video Decoder for TechnoTrend
CPU Type: Intel Pentium...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)...
Where abouts does the radio settings get stored, it doesnt' appear to be in the database Radio, i want to backup all the list of Radio streams i have in there, can someone let me know where they are?
Where abouts does the radio settings get stored, it doesnt' appear to be in the database Radio, i want to backup all the list of...
Where abouts does the radio settings get stored, it doesnt' appear to be in the database Radio, i want to backup all the list of...
If you cannot delete them from Scheduled recordings section in mytv, you can delete tvdatabase.db3 from the database directory. That will cause a loss of everything tv related though such as tuned channels, recorded show info (not the shows themselves), etc.
If you dont want to loose all that info then grab a copy of sqlite editor...
If you cannot delete them from Scheduled recordings section in mytv, you can delete tvdatabase.db3 from the database directory...
Hello all,
I apologize if I'm posting this in the wrong place. I had a hard time choosing.
I was just wondering if there...
Hi dMAN, The Asus PVR in my machine (hp m107n) still does not work as of RC3 cvs-03-25-2006--01-04.rar. I noticed your correction in the changelog for it and tried it out. Sorry.. still doesnt show up as an available card.
thanx..
Hi dMAN, The Asus PVR in my machine (hp m107n) still does not work as of RC3 cvs-03-25-2006--01-04.rar. I noticed your correction...
Hi dMAN, The Asus PVR in my machine (hp m107n) still does not work as of RC3 cvs-03-25-2006--01-04.rar. I noticed your correction...
Tried that without luck. MP freezes as soon as it gets to the next screen after that requiring to reboot computer. I'm guessing, could that be because I have SW21 switch to which satellite LNBs are attached? However, MyTheatre works fine with SW21 configuration.
Tried that without luck. MP freezes as soon as it gets to the next screen after that requiring to reboot computer. I'm guessing...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows MCE...
Finally I found 64 bit drivers for my X10 remote control at http://www.marmitek.nl/nl/software/x10drivers_x64.zip. Girder 3.3.5 picks up the signals. But when I try to control Media portal or other program, it does not react.
Does anybody know if Girder 3.3.5 supports windows x64? What else can I use between the x10 drivers and...
Finally I found 64 bit drivers for my X10 remote control at http://www.marmitek.nl/nl/software/x10drivers_x64.zip. Girder 3.3.5...
Finally I found 64 bit drivers for my X10 remote control at http://www.marmitek.nl/nl/software/x10drivers_x64.zip. Girder 3.3.5...
Nope.
Take up your issue with Twinhan support.
DMAN
Nope.
Take up your issue with Twinhan support.
DMAN
Hi everybody,
I'd like to know if anybody had any succes with a Twinhan Starbox with MediaPortal. If yes, what is your...
chrigii
Take the newest CVS and the Problem is gone (but all of the Snapshots)
chrigii
Take the newest CVS and the Problem is gone (but all of the Snapshots)
HI!
My MP-Configurator crashes while I'm updating the Moviedb or when I hit the "Cover"-button with following message:
Im...
Which Version Do use ?? Have you any CVS updated??
Of a better Support please show you Hard- and Softwareconfig. 8)
Which Version Do use ?? Have you any CVS updated??
Of a better Support please show you Hard- and Softwareconfig. 8)
Hallo Guys,
after i updated form 1.0 (uninstalled / recleaned / installed) i have problems in the setup.
When i wanna update my...
any news? the FireDTV is far too expensive for me but that's the only DVB-S device (at least what concerns external devices like USB) definitly working with MP i found so far.
any news? the FireDTV is far too expensive for me but that's the only DVB-S device (at least what concerns external devices like...
hi there. i'm currnetly using my notebook as a thpc (more or less). So there's no chance for me to use an internal TV-card with...
Ive got a few demo HD (1080i) files that Ive tried on my MP box which is only a 2600+ (1.8GHz, rest of specs is below) and they worked fine. The HD mpeg2 files work fine (50% cpu usage odd) but quicktime is atrocious, even my 2.8Ghz P4 games box wont play those suckers back.
Ive got a few demo HD (1080i) files that Ive tried on my MP box which is only a 2600+ (1.8GHz, rest of specs is below) and they...
I currently have MediaPortal running on a Mobile P4 2.8, but my motherboard (8IPE1000-G) doesn't support speedstep so the CPU is...
so your problems inside mp are solved now?
so your problems inside mp are solved now?
Hello,
for all my tracks it showes up the face from Juanes.
Why? Trouly in my Windows Mediaplayer also. On my Disk r loats of...
Ok I've spent an hour on the forums and you're all too clever for me so at the risk of appearing stupid here goes....
I've been using MP for playing music/DVD's etc and it works great on the whole. I'm now looking into adding a TV card but am rather confused about the typoes available and the application of these types. As far as I...
Ok I've spent an hour on the forums and you're all too clever for me so at the risk of appearing stupid here goes....
I've been...
Ok I've spent an hour on the forums and you're all too clever for me so at the risk of appearing stupid here goes....
I've been...
while browsing the guide i do see some shows that had where schedule to record, which i never scheduled for recording. I just ended up deleting the tvdatabase.db3. thanks
while browsing the guide i do see some shows that had where schedule to record, which i never scheduled for recording. I just ended...
My media portal is recording shows that are not scheduled. Is there a file i can delete in "program file/media portal" directory...
I have a lot of foreign movies not listed in imdb, but I'd like them to get into the mediaportal database.
How can I add movies to the database, without interactively going into the editor? I'd like to do this with commands/batch file so I can write scripts around them.
I know this should involve some sort of sqlite database...
I have a lot of foreign movies not listed in imdb, but I'd like them to get into the mediaportal database.
How can I add...
I have a lot of foreign movies not listed in imdb, but I'd like them to get into the mediaportal database.
How can I add...