Installation, configuration support (60 Viewers)

Having trouble installing or configuring MediaPortal?
MP1 MP2 Problem installing DE
I think that is a "known issue" - I have read of quite a few users hitting the same issue. Workaround is to skip that step, finish running the setup wizard, and then launch MediaPortal Setup and run the "autotune" from there (in Television, Capture card, Edit) - it should then work without error .... :)
I think that is a "known issue" - I have read of quite a few users hitting the same issue. Workaround is to skip that step...
I get an error message everytime i try to run the setup for the first time. It comes directly when I get to the point when it shall...
Replies
1
Views
1K
The pinout for the required cable can be found at dtvcontrol.com. I'm not really sure if the Cisco cable in question is wired correctly, but I'm sure that you can look at that pinout and tell.
The pinout for the required cable can be found at dtvcontrol.com. I'm not really sure if the Cisco cable in question is wired...
I,m very new to MP and I'm trying to gather all my hardware so I can get started on the installation and configuring MP. My only...
Replies
1
Views
1K
Same issue here Seems this is happening to alot of danish users :-) I installed MP 0.2 configured that and copied the MediaPortal.XML file to the install of 0.2.10 - That way I did not have to run the configurator wizard again
Same issue here Seems this is happening to alot of danish users :-) I installed MP 0.2 configured that and copied the...
Area: Media Portal Program MediaPortal Version: 0.2.0.4 (2006-08-11) MediaPortal Skin: - Windows Version: Windows XP (SP2) .NET...
Replies
19
Views
5K
Hi, the installation process of 0.2.0.4 on 0.2.0.0 was easier. One Click to run the Updater. :) But sometime the changes from one version to another are just to big. An update process then can lead to various bugs. So its safer to do a clean install. Flip.
Hi, the installation process of 0.2.0.4 on 0.2.0.0 was easier. One Click to run the Updater. :) But sometime the changes from one...
version 0.2.0.0 Windows Xp Pro The thread title should be "How do I update to Version 0.2.1?" Perhaps ridiculous, but I can't...
Replies
3
Views
1K
I installed the actual Mp-version on my Win XP PC (all windows updates performed.). The Programm is unable to load the plugins (althoug some of them are turned on in the settings). I have an Ashrock SIS 741 GX Mainboard. Can anybody help me? In general, the programm seems very nice to me -if it worked, it would be even nicer...
I installed the actual Mp-version on my Win XP PC (all windows updates performed.). The Programm is unable to load the plugins...
I installed the actual Mp-version on my Win XP PC (all windows updates performed.). The Programm is unable to load the plugins...
Replies
0
Views
864
Don't blame you for not playing. I sort of had it working by changing around the decoders but the sound was choppy. One last change and I was right back to no video. I'll have to play with this later.
Don't blame you for not playing. I sort of had it working by changing around the decoders but the sound was choppy. One last...
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: MCE Windows Version: Windows XP (SP2)...
Replies
7
Views
6K
MP1 MP2 Issue with display DE
Hey there- Please excuse a newbie to this site but. I am having some issues with my display when I launch meida portal on my laptop. I have installed on multiple other devices without issue, but on this box I get no background colour. Anyone come accross this before ???
Hey there- Please excuse a newbie to this site but. I am having some issues with my display when I launch meida portal on my...
Hey there- Please excuse a newbie to this site but. I am having some issues with my display when I launch meida portal on my...
Replies
0
Views
826
Hi everybody :) I have a 1100 card. I´d installed mp without problems (with last hauppauge drivers and 0.2.1 version of mp). The problem is when a try to autotune Digital channels, choosing for my location (Sevilla, Andalucia, Spain), never tune anything, and with mytheatre all goes well. :S What can i do?... P.D...
Hi everybody :) I have a 1100 card. I´d installed mp without problems (with last hauppauge drivers and 0.2.1 version of mp)...
Hi everybody :) I have a 1100 card. I´d installed mp without problems (with last hauppauge drivers and 0.2.1 version of mp)...
Replies
0
Views
1K
All I can suggest is that the 2.5e drivers are not installed correctly. The Hauppauge drivers should all report version 2.116.24167.0 in Device Manager.
All I can suggest is that the 2.5e drivers are not installed correctly. The Hauppauge drivers should all report version...
Why? MediaPortal Version: 2.0 + stable 2.04 Windows Version: Xp Pro Sp2 CPU Type: Amd 3500 64 bit HDD: Maxtor Sata 120...
Replies
5
Views
1K
I'm happy to report that I didnt have that error this time. Neither did I have "the scandinavian bug" when running the wizard first time! Thank you very much! :)
I'm happy to report that I didnt have that error this time. Neither did I have "the scandinavian bug" when running the wizard first...
When executing configuration.exe and selecting plugins, this fault occurs: 2006-11-08 17:57:34.000000 [Info.][Config Main]...
Replies
4
Views
2K
MP1 MP2 Backing up MP DE
Sorry to hijack this thread, but: A friend of mine is exp. black screen when using s-video in (on a 150MCE) - another friend (with same PVR) has no problems. Which files should I copy from the working-setup to the non-working? Thanks , and sorry if I'm hijacking.
Sorry to hijack this thread, but: A friend of mine is exp. black screen when using s-video in (on a 150MCE) - another friend (with...
MediaPortal Version: MediaPortal 0.2.1.0 Windows Version: Windows XP SP2 2005 CPU Type: AMD XP 2500 HDD: Maxtor 120GB Memory...
Replies
3
Views
1K
Hi mPod, Thx for the tip! home + a few clicks --> working! Cheers, Hans btw : haven't recognized the mapping feature for MCE-remote! From day 1 of my first MP-Installation, MCE remote has been workin "out of the box" and I really had no need to dive into MCE parameters.... .
Hi mPod, Thx for the tip! home + a few clicks --> working! Cheers, Hans btw : haven't recognized the mapping feature for...
Hi all, as I have NO tv-card installed on my MP-System, I can't set the recording path to a network-drive doing it the "normal...
Replies
5
Views
2K
Thanks. I followed the suggestion of mPod and all works well.
Thanks. I followed the suggestion of mPod and all works well.
I want to install MediaPortal from scratch. My system meets all the requirements. What should I do? 1. Install 0.2.0.0 3...
Replies
3
Views
2K
Installed latest version of MP without any errors. However, all menus and pick lists are in a strange (non-Latin) character set. Note that Main menus (like My Music etc.) are fine, and the language options in MP - Setup are working properly. What is wrong in my settings? Is it MP or XP? Please help ;-) MediaPortal...
Installed latest version of MP without any errors. However, all menus and pick lists are in a strange (non-Latin) character set...
Installed latest version of MP without any errors. However, all menus and pick lists are in a strange (non-Latin) character set...
Replies
0
Views
923
That did it, thanks!
That did it, thanks!
Area: Media Portal Program MediaPortal Version: - MediaPortal Skin: - Windows Version: Windows XP (SP2) .NET CLR Version...
Replies
2
Views
3K
Nevermind, it's working now. Ya got me what I did.
Nevermind, it's working now. Ya got me what I did.
I've been running a way old version for a while now & just upgraded to 0.2.1.0. I have an MCE remote that was working perfectly...
Replies
1
Views
933
Try .net 2.1 Which is what MP need so you need .net2 and then run Windows update which should update to 2.1
Try .net 2.1 Which is what MP need so you need .net2 and then run Windows update which should update to 2.1
MediaPortal Version: Latest Windows Version: Windows XP Pro With SP 2 With All Latest Updates CPU Type: Intel Pentium D945...
Replies
1
Views
1K
Same issue I installed the latest 2010 and I am not getting weather info or IMDB either.
Same issue I installed the latest 2010 and I am not getting weather info or IMDB either.
Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-03) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
4
Views
2K
Check my post in the following thread, I had the same problem after installing 0.2.1.0. https://forum.team-mediaportal.com/showthread.php?t=11572&page=2
Check my post in the following thread, I had the same problem after installing 0.2.1.0...
MediaPortal Version: latest version, have tried both previous versions Windows Version: XP PRO CPU Type: AMD ALTHON 64 3200 HDD...
Replies
3
Views
2K
What do you mean by continus improvement? MP is distributed under the GPL which means anyone can download the sources and improve upon it, as long as the result is also published under the GPL.
What do you mean by continus improvement? MP is distributed under the GPL which means anyone can download the sources and improve...
I have currently upgraded to version 0.2.1.0 All of my Movies are in DivX 6.x For some reason I can not see a "thumbnail"...
Replies
3
Views
1K
Exactly.
Exactly.
I'd like to install the latest stable MP, but I have already installed all the latest patches plus the SVN from 14 October. Will...
Replies
4
Views
2K
sorry about not filling in the template at this time, but im not at my htpc, so this will come later. as my question is rather urgent for me , perhaps anyone can give me a hint. im using mp for some years now but never encountered a problem like this. I´ve done a fresh install from the scratch, tried mp 2.0.0.4 and mp 2.0.0.0...
sorry about not filling in the template at this time, but im not at my htpc, so this will come later. as my question is rather...
sorry about not filling in the template at this time, but im not at my htpc, so this will come later. as my question is rather...
Replies
0
Views
1K
Hi and welcome! How did you setup channels in mediaportal-setup? Be sure to use CVBS(?)/SVIDEO and enter PAL etc (In a hurry - mor detailed later.. perhaps)
Hi and welcome! How did you setup channels in mediaportal-setup? Be sure to use CVBS(?)/SVIDEO and enter PAL etc (In a hurry -...
MediaPortal Version: 2.10 Windows Version: XP Pro SP2 CPU Type: 2.4ghz HDD: 160gb Memory: 1gb Motherboard:SHUTTLE Xpc Video...
Replies
1
Views
2K
Hi, mrozturk have a look on this thread, seems like this could be a language "bug". Regards Roy
Hi, mrozturk have a look on this thread, seems like this could be a language "bug". Regards Roy
MediaPortal Version: 2.10 Windows Version: XP Sp 2 CPU Type: Intel Mobile + P4 3ghz hyperthreading HDD: 40 Gb + 80 gb Memory...
Replies
6
Views
1K
Hi, Try downloading a new copy, preferrably from a different mirror. Kind regards, Michel
Hi, Try downloading a new copy, preferrably from a different mirror. Kind regards, Michel
MediaPortal Version: MediaPortal_0.2.1 Windows Version: XP SP2 CPU Type: Intel Pentium D 2.8Ghz HDD: Memory: 512 Motherboard...
Replies
1
Views
2K
jphhughes, I ran into this prob. too. However, i read somewhere (on this forum) that once zap2it gathers your list, click 'OK" to close the plugin GUI then come back to your computer in 20-30 minutes and see if it's populated in MP. What i read here was all you need is a bit of patience and time for the plugin to fully work. BTW...
jphhughes, I ran into this prob. too. However, i read somewhere (on this forum) that once zap2it gathers your list, click 'OK"...
Area: Media Portal Plugins MediaPortal Version: 0.2.1.0 (2006-10-21) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
9
Views
3K
re codecs i have tried but the codec shows as cyberlink video/SP decoder I am using cyberlink powerdvd7 windows mediaplayer is dark as well I was at the plugin page and downloaded the Divx player bundle and it plays dark too anybody else have a nvidia card that has HDCP---high def content protection--? my monitor is a 55"...
re codecs i have tried but the codec shows as cyberlink video/SP decoder I am using cyberlink powerdvd7 windows mediaplayer is...
Area: will not play commercial disks but will play "archived dvd's" MediaPortal Version: 0.2.1.0 (2006-10-21) MediaPortal Skin...
Replies
2
Views
2K
I don't like those cd/dvd drives in my music and my pictures, too. Afaik the drives always re-appear when opening the MediaPortal configuration, changing something and saving. Seems to me as it the configuration.exe always scans for new cd/dvd/virtual drives and automatically adds them. What I do: whenever I change something I...
I don't like those cd/dvd drives in my music and my pictures, too. Afaik the drives always re-appear when opening the...
MediaPortal Version: 0.2.0.4 Windows Version: XP Pro sp 2 CPU Type: Athlon 64 3200+ HDD: 200GB Seagate SATA Memory: 1024MB...
Replies
5
Views
2K
Got it. Hi Al. Thanks for the reply. Although I knew I had specified the extentions in config., I had overlooked the database scan. I assumed it was specifically for the IMDB, not for scanning files into MP. So now I have Media Portal playing all my video files, even ripped dvd folders on my hard drive. What a great piece of sw for...
Got it. Hi Al. Thanks for the reply. Although I knew I had specified the extentions in config., I had overlooked the database...
MediaPortal Version: 2.0 Windows Version: XP Pro CPU Type: Athlon64 3400+ HDD: 300gb SATA Memory: 512mb Motherboard: Uli...
Replies
2
Views
1K
I guess you didn't close the MediaPortal main application while configuring it with configuration.exe. In this case settings will not be saved. This shouldn't happen anymore with the latest versions, you'll get a warning now.
I guess you didn't close the MediaPortal main application while configuring it with configuration.exe. In this case settings will...
No matter, if movies, music or pictures, whenever I add my own folders, they are gone after a restart of media portal. So...
Replies
3
Views
1K
Top Bottom