Well, I've bitten the bullet and gone back to 32bit Windows XP, and aside from a few stability issues when using timeshifting (which I'll work through using the forums), its working a treat.
I guess it's still early days for 64 bit computing (at least at a consumer level).
I'd still like to keep this thread open, however, as I...
Well, I've bitten the bullet and gone back to 32bit Windows XP, and aside from a few stability issues when using timeshifting...
My first post to this forum - I've been struggling for days scouring forums and going through a process of elimination in getting...
Hi,
Could you try to use the latest SVN & use the BlueTwo skin. Run the SVN something.exe & use the backup alternative.
There have been some issues with fonts which it's solved in SVN. Dunno if this is your problem but give it a try.
Regards
Roy
Hi,
Could you try to use the latest SVN & use the BlueTwo skin. Run the SVN something.exe & use the backup alternative.
There...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)
.NET...
Hi I had the same problem,
What i did ? (after alot of stress this is what i think worked for me)
Install Directx 9.0c april version !
then download the WindowsInstaller-KB893803-v2-x86.exe file
installed the MP10 version of mediaplayer.
reboot and try with DxDiag if your video card supports the directdraw (test button)...
Hi I had the same problem,
What i did ? (after alot of stress this is what i think worked for me)
Install Directx 9.0c april...
Hi everybody,
MP is worjing fine on 0.2.0.0 RC4 version but when after a clean instal of mp and applying Updater for MediaPortal...
I'm almost too embarrased to say but I will anyway: it was my own fault. While collecting all the data again to have my problem dealt with, I noticed that I did not have SP2 installed. After doing so, everything is now running smoothly.
Sorry to have wasted yor time.......
One very happy guy
I'm almost too embarrased to say but I will anyway: it was my own fault. While collecting all the data again to have my problem...
Hi,
I seem to have everything working apart from the TV-recording. What happens is that when I try to record some things go...
If you have time pressures I would just install 32-bit windows. The support for x64 windows from both a hardware and software perspective is not really quite there at the moment. It works with the Fusion software because they don't have to support a wide range of capture cards, and of course if they release 64-bit drivers they are...
If you have time pressures I would just install 32-bit windows. The support for x64 windows from both a hardware and software...
Well i took the plunge and tried windows x64 with the 64 bit drivers for my tuner card, its a Fusion dvb-t plus card, it all works...
Just install the following patsch for WinXP: KB896626 (in your language)
It is a fix for DVB cards when searching or switching channels.
Regards,
Reneke
Just install the following patsch for WinXP: KB896626 (in your language)
It is a fix for DVB cards when searching or switching...
Area: Installation
MP Version: 0.2.0.0 + 0.2.0.4
Skin: First one on the list
Windows Version: XP sp2
CPU Type: Intel Northwood...
Install the following patch
Just install the following patsch for WinXP: KB896626 (in your language)
It is a fix for DVB cards when searching or switching channels.
Regards,
Reneke
Install the following patch
Just install the following patsch for WinXP: KB896626 (in your language)
It is a fix for DVB cards...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-03)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
This is not supported in MediaPortal, sorry.
You might wanna search the forums, some users worked around it. But expect major drawbacks, e.g. CPU jumping to 100%, sluggish performance and so on. Those other threads tell you more on that topic.
Thread closed.
This is not supported in MediaPortal, sorry.
You might wanna search the forums, some users worked around it. But expect major...
Hi There
I would like to run MediaPortal in overlay mode, but i cannot find anyway to set it up.
The reason for my request is...
A bit strange, but you have to set them up as radio station streams in the radio module in config. (Yes, video streams are set up as radio streams). The implementation is not very comfortable yet, but currently that's the only way to view video streams in MediaPortal.
This might change with the new TV engine, as this one will provide...
A bit strange, but you have to set them up as radio station streams in the radio module in config. (Yes, video streams are set up...
some question to ask. if my pc dont have any tv card... that i want to run internet tv how to configure.. i have a few website...
Hi natrlhy,
I did get it to finally work. I have a PVR-150 with the IRBlaster cable and Hauppauge remote that came bundled together. Here are the steps I used to get it working.
1. Install the Hauppauge software (get the latest drivers off of the website)
2. Configure the Hauppauge channel (i just configured channel 3 which is...
Hi natrlhy,
I did get it to finally work. I have a PVR-150 with the IRBlaster cable and Hauppauge remote that came bundled...
:S I was wondering if someone knows of this problem that I am having. I searched teh forum but couldn't find this problem. I'm...
I had to activate the feature "Repost video on resume" in the BIOS on my Asus P4C800 or I just got a black screen. If you have an option like that, try it out.
I had to activate the feature "Repost video on resume" in the BIOS on my Asus P4C800 or I just got a black screen. If you have an...
Scheduled recording issue
MediaPortal Version: 0.2.0.4
Windows Version: XPSP2 all Patches
CPU Type: Pentium M
HDD: Samsung...
I've also got one these USB sticks and also managed to get MP to detect it with the above capture card entry...
Like the rest of the reports when I do a channel scan MP only detects the channel that I was watching last with Blaze.
Even at that, when I try to watch that channel in MP I get the following error:
"Failed to Start TV -...
I've also got one these USB sticks and also managed to get MP to detect it with the above capture card entry...
Like the rest of...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Hi, Im new to Mediaportal and Im having difficulties setting up .NET framework 2.0. Im using the setup in the mediaportal 0.2 zip archive and it looks to be starting and downloading the file. But then it goes into installation and it takes forever. The progress meter goes roun and round and it says that installation is taking longer...
Hi, Im new to Mediaportal and Im having difficulties setting up .NET framework 2.0. Im using the setup in the mediaportal 0.2 zip...
Installed MS dotnet 2.0SP1 in 1 package, and since this should be newer, should it not be supported by MP 0.2.0.0 ?
It complains...
I am trying to get started with MP, and I get error messages saying that MP has run into a problem (unspecified) and needs to close, which it does not do, however. The logs point to a problem with sqlite.dll. Is the language conflict mentioned by you still unsolved?
I run a Swedish XP version.
Sven
I am trying to get started with MP, and I get error messages saying that MP has run into a problem (unspecified) and needs to...
Wich Windows language I should use in my MP PC? Can I run Mp on Swedish XP or should I install the English version instead?
I...
Hi,
The installation (first time) Wizard & some Scandinavians version it's a known problem. For some reason on those setup sqlite make this exceptions when using the first time Wizard. With the new TVEngine which use an other database this will not happen.
Regards
Roy
Hi,
The installation (first time) Wizard & some Scandinavians version it's a known problem. For some reason on those setup sqlite...
Area: Media Portal Program
MP Version: MediaPortal 0.2.0.2
Skin: mce
Windows Version: WinXP, SP2
CPU Type: ADM 64, 3000+...
I do just that to move mediaportal between my test bench desktop and HTPC pcs.
So should work, you got nothing to lose by trying this let me know how it goes.
I do just that to move mediaportal between my test bench desktop and HTPC pcs.
So should work, you got nothing to lose by trying...
MediaPortal Version: MediaPortal 0.2.0.4
Windows Version: Windows XP SP2
CPU Type: AMD Athlon XP 3000+
HDD: Maxtor Diamond Max...
In table "station" you need to fill the ChannelNr, the Frequency, idChannel and strChannel and then copy the rest from a previously autotunned radio station to match the new ones you enter.
In table "tblDVBSMapping" you need to fill the frequency, the symbolrate, idChannel and strChannel and then copy the rest from etc...
In...
In table "station" you need to fill the ChannelNr, the Frequency, idChannel and strChannel and then copy the rest from a previously...
Hi
I have not used the template as I don't think my hardware is relevant.
So here goes.
When you install MP the 1st time...
I'm thinking of getting this over 2 WinTV 150's. (this one specifically eVGA 032-NVTV-TX 32mb Dual TV Tuner PCI)
Anyone know if this persons problem has been fixed?
I'm going to the store to purchase tomorrow :)
I'm thinking of getting this over 2 WinTV 150's. (this one specifically eVGA 032-NVTV-TX 32mb Dual TV Tuner PCI)
Anyone know if...
I don't have Media Center Edition...how can I get this to work?
I installed the Media Center Drivers, and it seemed to have...