Having trouble installing or configuring MediaPortal?
2 x Nova T500 Dual DVB Tuners...
I can get the cards detected on my system, but MP recordings go haywire...can't seem to start more than 2 simultaneous recordings and lots of "no free tuners" errors...WTF?
Also, IceHappy, did you ever get 4 Nova's working in MP?
2 x Nova T500 Dual DVB Tuners...
I can get the cards detected on my system, but MP recordings go haywire...can't seem to start...
MediaPortal Version: 2.1 SVN 12192006 15 35 rev 12254
MediaPortal Skin: default
Windows Version: XP Pro Sp2 with latest updates
CPU...
Not sure if it will work, but you can try this plugin.
Not sure if it will work, but you can try this plugin.
When i recently upgraded from RC2 to RC4 i lost all my settings & the database content for Moving Picture & MP-TV Series.
When i...
TV-Server Version: the one that comes with Medioportal 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue (default)
Windows Version: Windows XP Home SP3, updates from yesterday
CPU Type: Intel Pentium 4 3 Ghz
HDD: 200GB Seagate IDE
Memory: 512 MB DDR1 (not enough, but its just for testing)
Motherboard:
Video Card: ATI...
TV-Server Version: the one that comes with Medioportal 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue (default)...
TV-Server Version: the one that comes with Medioportal 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue (default)...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin:
Windows Version: Windows XP Professional 32-bit SP2
CPU Type: 2X Intel Xeon 5120 2.66Ghz
HDD: SATA 250GB Western Digital, SATA 250GB Seagate
Memory: 2X 1GB WINTEC 240-Pin DDR2 FB-DIMM DDR2 667 (PC2 5300) ECC Fully Buffered
Motherboard: Tyan i5000XL...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin:
Windows Version: Windows XP Professional 32-bit SP2...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin:
Windows Version: Windows XP Professional 32-bit SP2...
Hi,
I've an Asus p7131 dual and I've red all about in this forum but I can't solve this problem.
No channels for DVB tuner are found also in powercinema.
I've got another PC with a pinnacle hybrid card and I find digital channels but with this Asus I can't.
Did someone solve this problem or have advices??
THX
Bye
Hi,
I've an Asus p7131 dual and I've red all about in this forum but I can't solve this problem.
No channels for DVB tuner are...
Hi,
I've an Asus p7131 dual and I've red all about in this forum but I can't solve this problem.
No channels for DVB tuner are...
Hi Folks,
I want to upgrade to the next version of MP - is there a way I can export all the watched flags for myvideos?
I'd like MP to remember what is watched and what is not... when I upgrade.
thanks in advanced!
Hi Folks,
I want to upgrade to the next version of MP - is there a way I can export all the watched flags for myvideos?
I'd...
Hi Folks,
I want to upgrade to the next version of MP - is there a way I can export all the watched flags for myvideos?
I'd...
MediaStream... guess i should have said that.:oops:
MediaStream... guess i should have said that.:oops:
when i selected a series that have multiple seasons for i launche to another screen that shows me the seasons to select from. the...
Correct files
Files:
Here are the files I use to make the IRTrans receiver work with MediaPortal.
These files make step 3 and 5 obsolete as these files are the outcome of those actions.
Files included in the .rar:
apps.cfg - This file makes sure your remote commands don't get executed twice
mediacenter.rem - The file with all the...
Correct files
Files:
Here are the files I use to make the IRTrans receiver work with MediaPortal.
These files make step 3 and 5...
Problem:
Hi,
I've been trying, for two days now, to get my Logitech Harmony 555 remote to work with the IRTrans reciever from...
I use a combination of smal .net app and bat file.
The .net app starts my bat file
wich gets my xml TV file
moves it to the correct folder
and waits for x second, so the import should be done.
If you want it?
I use a combination of smal .net app and bat file.
The .net app starts my bat file
wich gets my xml TV file
moves it to the...
I live in Adelaide Australia and have been using MP for TV viewing for a while now and haven't had too many issues at all. Great...
Hello,
is it possible to use the pinnacle showcenter 200 with the mediaportal software ? Can you tell me how does it works ?
Thanks for answers !
Bye
Hello,
is it possible to use the pinnacle showcenter 200 with the mediaportal software ? Can you tell me how does it works ...
Hello,
is it possible to use the pinnacle showcenter 200 with the mediaportal software ? Can you tell me how does it works ...
Instead of using the Configuration desktop link I used the normal MediaPortal one, it crashed during the splash screen, then I started it again and the buttons at the bottom were there. :wtf: *shrugs*
Instead of using the Configuration desktop link I used the normal MediaPortal one, it crashed during the splash screen, then I...
I've just installed MediaPortal on my Vista HTPC, which runs on a 1024x768 resolution. I tried to set the Movie/Music folders - but...
TV-Server Version: v0.9.3.20432
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: Blue 3 Wide
Windows Version: Vista SP1
CPU Type: 2.0 Core 2 Duo
HDD: 250gb
Memory: 4Gb DD2 667Mhz
Video Card: built in (Radeon HD3470)
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppage WinTV-HVR3000...
TV-Server Version: v0.9.3.20432
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: Blue 3 Wide
Windows Version: Vista SP1
CPU...
TV-Server Version: v0.9.3.20432
MediaPortal Version: 1.0.0.0 RC4
MediaPortal Skin: Blue 3 Wide
Windows Version: Vista SP1
CPU...
holy shite! that may be exactly what happened!
last night i reinstalled from scratch and killed kaspersky before i started and it worked the first time.
hmmm.
those damn german virus ****'s.....
wonder how i make it stop blocking and still be able to use the software????
what did you do?
holy shite! that may be exactly what happened!
last night i reinstalled from scratch and killed kaspersky before i started and it...
new install and i cant get this plugin correctly configured.
if i select series view or season view in graphical i dont see any...
[Hi there,
i am new to this forum and currently have this little problem: My HTPC has no internet connection yet. Therefore, the "Update satellite list" function does not not work and so I cant scan for channels. I would like to watch the 19,2° astra satellite. Is it possible to manually download these list somewhere and copy them...
[Hi there,
i am new to this forum and currently have this little problem: My HTPC has no internet connection yet. Therefore, the...
[Hi there,
i am new to this forum and currently have this little problem: My HTPC has no internet connection yet. Therefore, the...
Sorry, forgot to mention that I'm using the inbuilt tv engine.
Sorry, forgot to mention that I'm using the inbuilt tv engine.
I just switched to MP 1.0 RC4 and would like to import my channel list from my MP back up folder but don't know what file I need...
thanks ! :)
thanks ! :)
anyone knows which button in the remote which resumes a movie/tv show that's playing in the little box on the left corner, while...
Hi,
Did you find any solution?
I have the same problem...
Jose
Hi,
Did you find any solution?
I have the same problem...
Jose
TV-Server Version: TV Server 1 RC4
MediaPortal Version: Media Portal 1 RC4
MediaPortal Skin: Blue
Windows Version: XP SP3
CPU...
This is not normal behaviour, mine are set to use D:\TVRecordings which works fine, so logs needed.
Make sure all cards point to this directory, selectable by the dropdown box, stop then restart TVServer after you have made changes, you should show new path still if you reopen TVServer config, if you cannot change then chances are...
This is not normal behaviour, mine are set to use D:\TVRecordings which works fine, so logs needed.
Make sure all cards point to...
The folder settings in optiions under TVServer Configuration->Recording Settings->Recording Folders are not being honored.
I...
Similar complaint.
Possible sollution.
Similar complaint.
Possible sollution.
Why is it that you can not program the installation to carry over the configuration? Every time I install Media portal I have to...
Hallo Leute, habe schon sehr lange mediaportal auf einen meiner pc's. Möchte jetzt RC2 mit RC4 updaten. ist das möglich? wass muss ich tun?
Hallo Leute, habe schon sehr lange mediaportal auf einen meiner pc's. Möchte jetzt RC2 mit RC4 updaten. ist das möglich? wass muss...
TV-Server Version: 0.2.3.0
MediaPortal Version: 1 RC2
MediaPortal Skin:
Windows Version: WinXP Pro SP3
CPU Type: Athlon XP...
How can something that apears so straight forward be so confusing.....
I have had a try with WEBEPG and it creates a TVGuide.xml file in C:\Documents and Settings\All Users\Application Data\Team MediaPortal\MediaPortal\xmltv,
not in c:\program files TeamMediaPortal \Mediaportal\xmltv as stated somewhere.
I Could'nt understand...
How can something that apears so straight forward be so confusing.....
I have had a try with WEBEPG and it creates a TVGuide.xml...
I'm trying to configure WebEPG and getting rather confused.
The set-up itself is fine, everything mapped and it produces the...
So I just want to answer my own post.
I rebuilt my PC (vista reinstall) and reinstalled MP, using my LCD monitor. Set to resolution to 1080p (1920x1080) as soon as ATI display drivers are installed and never change it.
now when I connect my PC to HDTV using HDMI - MP runs!
So there is something inside MP, that can't cope...
So I just want to answer my own post.
I rebuilt my PC (vista reinstall) and reinstalled MP, using my LCD monitor. Set to...
I have put most of the weekend into this and got MP 1.0RC4 (HD express install) working reasonably nicely for TV on my newbuild...
I have it set up so that you press back arrow (from default folder in filmstrip view // or you could use ".." in list view) then it comes up with folder list. then 1 click to get the folder you want to use.
I have it set up so that you press back arrow (from default folder in filmstrip view // or you could use ".." in list view) then it...
I have tried to find the answer to this myself for the past week and just can't seem to figure it out...
Is it possible to...
theres a plugin which does this.
backupsettings
Its in the plugin section. You install it to tvserver plugins, activate it, nominate a folder to make the backup in then press export.
when you install new version, install the plugin and direct it to back up folder then Import.
It comes with documentation in pdf format.
theres a plugin which does this.
backupsettings
Its in the plugin section. You install it to tvserver plugins, activate it...
TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: Monochrome 2.4
Windows Version: Windows XP
I want to have...
Actually not true. With RC4 you can use tv server or the build in tv plugin. You need to choose between TVE2 / TVE3 when installing MediaPortal.
Actually not true. With RC4 you can use tv server or the build in tv plugin. You need to choose between TVE2 / TVE3 when installing...
I just upgraded today from MP version 0.2.2.3 (I think that was the version) to 1.0 RC4 and I don't see any options to add my tv...
Thanks for that Ian
I have now found ITV HD from an auto scan and can see the placeholder.
I think all the scanned channels are stored in the database, not a flat file so is not easy to share.
A note to the OP make sure you have in your LNB setup 28.2E Freesat selected not 28.2E Astra as this was my mistake in not finding ITV...
Thanks for that Ian
I have now found ITV HD from an auto scan and can see the placeholder.
I think all the scanned channels...
I have just installed the latest mediaportal 1.
Everything went fine up until channel searching for freesat channels.
It seems to...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3 Wide 1920*1080
Windows Version: Vista 32 Bit SP1
TV Card: Terratec Cinergy 2400i DT (DVB-T)
Hi,
Problem 1:
I am actually trying for hours to get the channel numbers to show up on the OSD nevermind where.
(see Screenshot for example)
I played around with...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3 Wide 1920*1080
Windows Version: Vista 32 Bit SP1
TV...
TV-Server Version: 1.0 RC4
MediaPortal Version: 1.0 RC4
MediaPortal Skin: Blue3 Wide 1920*1080
Windows Version: Vista 32 Bit SP1
TV...
1) Under Vista MP is still using DirectX9 (ex), so no DX10 is not used under Vista. DX9 and DX10 are both co-existing in Vista.
2) DX10 under XP is nothing "real". Most likely its just emulating DX10 features in software (as the driver framework in XP doesn't support all the needed features). So if you really dont need to have some...
1) Under Vista MP is still using DirectX9 (ex), so no DX10 is not used under Vista. DX9 and DX10 are both co-existing in Vista...
I'm trying to set up MediaPortal on a windows xp setup that has directx10 and the MediaPortal setup want's to remove my directx and...
I just downloaded and installed RC4 and but the configuration program will not save the configuration. I get the following error message:
System.InvalidOperationException: Unable to generate a temporary class (result=1).
error CS0008: Unexpected error reading metadata from file...
I just downloaded and installed RC4 and but the configuration program will not save the configuration. I get the following error...
I just downloaded and installed RC4 and but the configuration program will not save the configuration. I get the following error...
thanks paranoid. that thread sounds very much like an unfinished piece of work (have read it 3 times, still can't conclude which set of files a new guy should try) but would be nice when it is done.
I now have xml / webepg working reasonably well (not tested to death yet), so I decided to celebrate by moving my htpc to the tv...
thanks paranoid. that thread sounds very much like an unfinished piece of work (have read it 3 times, still can't conclude which...
I'm new to mediaportal (finally trying it as alternative to VMC). using vista ultimate 32bit completely clean install...