MyTV - Engine 0.2 (1 Viewer)
General talk, support, improvement suggestions and tips & tricks
support (1 Viewer)
Got a problem with MediaPortals TV-Engine 0.2? Post it here!
Tips and Tricks (10 Viewers)
Post your Tips and Tricks in here.
improvement suggestions (1 Viewer)
Got an idea how the TV-Engine 0.2 can be improved? Post it here!
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels are smushed into the same 4:3 ratio as the SD channels. If i manually change the ratio by selecting 'Stretch' it displays properly, but then all of the SD channels are stretched. I don't want to have to...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels...
This is a common fault with the 0.2x
First thing to perform is the following.
Make sure you perform multiple scans. One at 7 AM, one at 3PM and one at 9PM. This is so that you pick up the maximum channels that were off-air during the previous scan.
Even after the above, you will find you are missing a number of channels...
This is a common fault with the 0.2x
First thing to perform is the following.
Make sure you perform multiple scans. One at 7...
i just got my DVB-S-card to work... I use it with the Astra/Hotbird satellites at 28,2 degrees east...
I did a scan of channels at...
hmmm can anyone help? :S
hmmm can anyone help? :S
Hey guys, my first post - so a big :thx: to all the devs, testers, etc - I'm using MP (mostly) without problems and it is an...
On one of my HTPC's I run MP in windowed mode on the lcd monitor and have the TV setup as secon monitor in clone mode. I use overlay on 2nd display to show tv & vidio full screen on the tv whils i can brows the web, play games, learn to program in C# on the primary monitor. I control MP using the MCE remote whilst doing other things...
On one of my HTPC's I run MP in windowed mode on the lcd monitor and have the TV setup as secon monitor in clone mode. I use...
I've been looking but can't seem to find it. Is there an option to basically make a small window at the bottom of your screen that...
Dear all,
I don't know if it is the good place to post that... Correct me if I'm wrong...
I'm using a cinergy T2 board (DVB-T). Some chanels have multilangual broadcasts. I can see them and switch on them for some chanels, but not on all of them...
Using a software like pouvhinTV (http://pouchinteve.free.fr/) I can see both...
Dear all,
I don't know if it is the good place to post that... Correct me if I'm wrong...
I'm using a cinergy T2 board...
Dear all,
I don't know if it is the good place to post that... Correct me if I'm wrong...
I'm using a cinergy T2 board...
Could someone check this ?
https://forum.team-mediaportal.com/rev13129_ts_and_recording_doesnt_work_anymore-t20155.html
Thanks
Claudio
Could someone check this ?
https://forum.team-mediaportal.com/rev13129_ts_and_recording_doesnt_work_anymore-t20155.html...
Could someone check this ?
https://forum.team-mediaportal.com/rev13129_ts_and_recording_doesnt_work_anymore-t20155.html...
Hi There,
This is an known issue with XP, and there has been a fix available for some time now.
Have a look at the following thread:
https://forum.team-mediaportal.com/multi_dvb_tuner_issues_windows_xp_patch-t6344.html
Cheers
Jamie
Hi There,
This is an known issue with XP, and there has been a fix available for some time now.
Have a look at the following...
i read something here: https://www.team-mediaportal.com/requirements.html
" Windows XP SP2: With WindowsXP you are able to use...
hey jimbojumbo,
I think many users in oz have this same problem since the number of FTA channels seems less than other countries.
Here's how I got my TV Guide right:
1. Using notepad, open up the mytvguide.xml for your appropriate skin
2. Backup the original (e.g. mytvguide.bak)
3. Then find this section...
<control>...
hey jimbojumbo,
I think many users in oz have this same problem since the number of FTA channels seems less than other...
Hi all,
Just got my Media Portal installed and the EPG installed. Kudos to all involved, a magnificent effort)
The only query...
I had not seen this new option.
I will test.
Thank you!
I had not seen this new option.
I will test.
Thank you!
Hello,
First of it is important to say that I have 2 TV cards.
Yesterday evening I programmed via the guide several...
Well... i guess that this is not possible... I did find an ACTION within MP called show_codec, but this does not work either... so i graphedit seems to be the way to go.
Well... i guess that this is not possible... I did find an ACTION within MP called show_codec, but this does not work either... so...
All,
Sorry...managed to post this thread in the root...hence the move of it...
This might be a very stupid question...but i...
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I will not get a perfect aspect ratio, right?
Isn't there a general cropping option that crops the top/left/right/bottom all at once so that the proper aspect ratio is never lost?
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
I already looked in te keyboard shortcut keys. there is nothing there for swithcing to the tv-guide
I already looked in te keyboard shortcut keys. there is nothing there for swithcing to the tv-guide
I was just wondering if it is possible to go straight to the tv-guide from MediaPortal-Home, instead of goin through MyTv and then...
Can be changed, search for EPG display, amount of programs, or similar.
Yes many people find this annoying, But hey, MP is designed for the future and that does mean for the average user, many channels.
Can be changed, search for EPG display, amount of programs, or similar.
Yes many people find this annoying, But hey, MP is...
Please feel free to direct me to a provious thread, but for some reason all of my channels are showing twice in the TV Guide...
Sorry cannot give you a answer on this, do not even remember anyone posting the same query.
Does seem a bit strange the extra codecs being used, unless someone a lot wiser can give you a answer, do not know.
Strange some seem to be duplicated though.
Sorry cannot give you a answer on this, do not even remember anyone posting the same query.
Does seem a bit strange the extra...
Cause of the difference in hearing sound watching tv when I have timeshift on or off I want to ask, why the directshowfilters in...
Using DVB dual tuner works better as I don't have to bother with all the crappy MS patches to get both tuners working at once. Plus, as I currently use my desktop for MP currently, its great to be able to record without firing up MP (or forgetting to), and being able to stream to my laptop (most of the time!)
This thread has a...
Using DVB dual tuner works better as I don't have to bother with all the crappy MS patches to get both tuners working at once...
hi, i've been on a bit of a hiatus from the forums and the mediaportal website in general as i was extremely happy with the...
Hi, I added those options. The newest vmr9 settings change the resizing algorithm to take advantage of your underlying video hardware. Your results may vary. Ideally, you should turn on non-square mixing and choose gaussian quad filter. There is currently not any checking to make sure your video card can actually implement the...
Hi, I added those options. The newest vmr9 settings change the resizing algorithm to take advantage of your underlying video...
Does anyone notice ant difference within MP when playing with antialiasing / anisotropic filtering?
Kev.
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761)
"While I was testing SageTV I noticed that when I switch between cards, the buffer doesn’t get deleted. And also when I restart the computer after SageTV crashes (it crashed so many times v6) I can still watch the old...
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761)
"While I was...
Hi
I know this was well discussed in the past whether it is a good idea to have or not.
Would implementing an option in...
OK, thanks!
/jayrock
OK, thanks!
/jayrock
In full screen TV, pressing "P" jumps to the next channel. Is this intended behaviour?
I have assigned "P" to the play button on...
JoeFedora
Please see this post, http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list
and follow the instructions, your card needs to be added to the supported list
to run inside mediaportal, or you need to setup TVengine3 (which should find your card on its own) with the TVserver.
Always think myself, nice...
JoeFedora
Please see this post, http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list
and follow the...
I have Digio2 USB2 receiver. Seems that mediaportal doesn't support usb 2receivers att all. Has anybody idea how it could work? Do...
This is no longer a problem for me as I have a tv server setup that is now working fantastic!!
I don't know what the problem was with the previous tv engine tho I tried serveral time and had the same result everytime, i tried a fresh install, i tried the Microsoft patch from the above thread, all no joy!!
Hopefully it won't...
This is no longer a problem for me as I have a tv server setup that is now working fantastic!!
I don't know what the problem was...
I can't get media portal to work with 2 tuners.
Both work when the other is deselected using the tick boxes in the config, but...
found it:
<control>
<description>template for program title light area</description>
<type>label</type>
<id>24</id>
<visible>no</visible>
<label>-</label>
<font>font13</font>
<textcolor>FFFFFFFF</textcolor>
<animation effect="fade" time="250">WindowOpen</animation>...
found it:
<control>
<description>template for program title light area</description>
<type>label</type>...
Hey,
I've got a widescreen 32" TV and when viewing TV guide I have hard time reading TV guide due to the fact that it displays...
Oops, i should have posted under support - can a mod. move for me please as i don't seem to be allowed to...
thanks,
Ian
Oops, i should have posted under support - can a mod. move for me please as i don't seem to be allowed to...
thanks,
Ian
Hello,
Has anyone been successful in getting the BBC HD Stream over DVB-S via media portal? I have a TT S2-3200 card and am...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it XYZ), and i can recive it from 3 different sources, how do i set this channel up.....
If i eg. can record the XYZ from both analoug antenna, DVB-s and DVB-t.....
It would be nice if i did not have to...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it...
heres a thread that has most of the details aout the problem
https://forum.team-mediaportal.com/showthread.php?t=9995&page=5&highlight=index
heres a thread that has most of the details aout the problem...
Having the channels in the correct order hasnt worked in a very long time
last i heard someone looked at the code and found that...
that's too bad :(
zap2it is very accurate and provides it for all of north america..
that's too bad :(
zap2it is very accurate and provides it for all of north america..
I have what may be a simple question but can't seem to locate the answer in any documentation or FAQ.
Is there a way to setup...
Has anyone managed to get Foxtel working in a PC card with a CAM module. If you have a legit satellite service surely this would be legal ?
Has anyone managed to get Foxtel working in a PC card with a CAM module. If you have a legit satellite service surely this would be...
Has anyone managed to get Foxtel working in a PC card with a CAM module. If you have a legit satellite service surely this would be...