Problems with the TV-Server or MyTV frontend? Post them in here.
Think you will find this is a ongoing problem for various DVB-T users (Sweden and UK) Thread below, Frodo is actively involved in this one.
https://forum.team-mediaportal.com/dvb_t_channel_names_not_picked_up-t22117.html
Think you will find this is a ongoing problem for various DVB-T users (Sweden and UK) Thread below, Frodo is actively involved in...
TV-Server Version: rev 15025
MediaPortal Version: 0.2.3 RC1
MediaPortal Skin:
Windows Version:XP SP2
CPU Type:
HDD:
Memory...
I am using engine 0.2, but I wonder if this problem have the same origin:
https://forum.team-mediaportal.com/not_possible_set_recordings_any_tv_series-t24786.html
I am using engine 0.2, but I wonder if this problem have the same origin...
TV-Server Version: newest SVN
MediaPortal Version: 0.2.3.0 newest SVN
MediaPortal Skin: Blue two
Windows Version: XP pro SP2...
MediaPortal Version: TV Server
MediaPortal Skin:
Windows Version: XP SP_2
CPU Type: AMD Athlon64 3500
HDD: Segate 60 GIG laptop
Memory: 512 MB
Motherboard: MSI
Motherboard Chipset:
Motherboard Bios:
Video Card: Geforce 6150
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Nvidia Dual TV
1...
MediaPortal Version: TV Server
MediaPortal Skin:
Windows Version: XP SP_2
CPU Type: AMD Athlon64 3500
HDD: Segate 60 GIG laptop...
MediaPortal Version: TV Server
MediaPortal Skin:
Windows Version: XP SP_2
CPU Type: AMD Athlon64 3500
HDD: Segate 60 GIG laptop...
If tve3 uses the same capture card xml file as tve2, this would have been resolved pretty easily...
If tve3 uses the same capture card xml file as tve2, this would have been resolved pretty easily...
MediaPortal Version: Release 0.2.0.0 + MediaPortal-svn--02-23-2007--16-33-Rev13072
MediaPortal TV3 Version...
I have 2 cards: Technisat SS2 and Medion (Phillips). The SS2 does not work @ all with the BDA-drivers, but with the B2C2 its is fine . The Medion-card only comes with BDA-divers no dvb-s or analog radio recieving. Neither inthe original software (homecinema ...bäääää anyway). Could it be that signal- and quality level are 2 low...
I have 2 cards: Technisat SS2 and Medion (Phillips). The SS2 does not work @ all with the BDA-drivers, but with the B2C2 its is...
After scanning Astra 19,2E I get about 300 TV-Stations. None of them is a german one. Moreover I am not getting MTV, VIVA etc. My...
Maybe this might help you.
-level20peon
Maybe this might help you.
-level20peon
Hello,
I search some web-interface for the tv-server. Is there a project running. I couldn't connect to the wiki-page.
THX for...
TV-Server Version:
MediaPortal Version: 2.2.0 + SVN
MediaPortal Skin: Blue Two
Windows Version: WinFLP XP SP2
CPU Type: AMD 3500+
HDD: WD 200GB
Memory: 2Gb DDR
Motherboard: MSI
Motherboard Chipset:
Motherboard Bios:
Video Card: ATI X1150
Video Card Driver: Omega 7.2
Sound Card: Realtek HD Audio
Sound Card AC3:
Sound...
TV-Server Version:
MediaPortal Version: 2.2.0 + SVN
MediaPortal Skin: Blue Two
Windows Version: WinFLP XP SP2
CPU Type: AMD...
TV-Server Version:
MediaPortal Version: 2.2.0 + SVN
MediaPortal Skin: Blue Two
Windows Version: WinFLP XP SP2
CPU Type: AMD...
TV-Server Version:05-31-2007
MediaPortal Version: 06-25-2007
MediaPortal Skin:
Windows Version: vista ultimate 32bit
CPU Type:
HDD:
Memory:
Motherboard:
Motherboard Chipset:
Motherboard Bios:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Ultraview DBD-T Plus
1...
TV-Server Version:05-31-2007
MediaPortal Version: 06-25-2007
MediaPortal Skin:
Windows Version: vista ultimate 32bit
CPU...
TV-Server Version:05-31-2007
MediaPortal Version: 06-25-2007
MediaPortal Skin:
Windows Version: vista ultimate 32bit
CPU...
Hi !
Plz update your mediaportal installation with the latest SVN.
https://forum.team-mediaportal.com/mediaportal_nightly_builds-f198.html
Then see if it doesn't work.
/Gibman
Hi !
Plz update your mediaportal installation with the latest SVN...
Hi,
Single-Seat configuration
I can't activate watching TV in Mediaportal.
I can only watch when I activated TimeShifting...
Hallo,
any idea how i can troubleshoot this?
The problem is defintive relatet to the TV-Engine because when i use only MP it works fine.
CPU is around 10-20% and the system is only build to handle HTPC functions.
regards
Grobi
Hallo,
any idea how i can troubleshoot this?
The problem is defintive relatet to the TV-Engine because when i use only MP it...
Hallo Team,
after setup a new system as a single HTPC with MySQL and TV-Engine 0230 RC1
and MP 0230 RC1 i observed jerking...
Hallo Team,
after intalling MySQL5 and TV-Engine 0230 RC1 and confguring the engine it saw to run fine.
But after rebooting the PC and trying to start manualy the timeshift or recording
i get the message "Unknown error occured".
Also refreshing of EPG doesn't work.
Connction to the TV-Card is established because scanning is...
Hallo Team,
after intalling MySQL5 and TV-Engine 0230 RC1 and confguring the engine it saw to run fine.
But after rebooting...
Hallo Team,
after intalling MySQL5 and TV-Engine 0230 RC1 and confguring the engine it saw to run fine.
But after rebooting...
:thx:
Thanks all,
the usual case of doing too many new things at one.
I uninstalled MP & server & SQL & reinstalled in stepwise fashion.
When I had installed MP, I realised that GetOZTVGuide that I had just started to use does not successfully change channel names in the xml file (at least I cannot get it to) and the resulting...
:thx:
Thanks all,
the usual case of doing too many new things at one.
I uninstalled MP & server & SQL & reinstalled in...
Hi,
Have just installed the TV engine 3 & all seems to work very well, except I cannot find how to get the TV guide to be read...
My logs:
My logs:
TV-Server Version: Latest (todays build)
MediaPortal Version: Latest (todays build)
MediaPortal Skin: Blue Wide
Windows Version...
TV-Server Version: last
MediaPortal Version: last
MediaPortal Skin: blue
Windows Version: XP
CPU Type: p4
HDD: 360MB
Memory: 1GB
1. TV Card: Technisat Skystar 2
MP does not show any EPG. With the original software from Technisat I get EPG on the fly. The TV-Server shows that it is scanning for EPG. Even if I leave the...
TV-Server Version: last
MediaPortal Version: last
MediaPortal Skin: blue
Windows Version: XP
CPU Type: p4
HDD: 360MB
Memory...
TV-Server Version: last
MediaPortal Version: last
MediaPortal Skin: blue
Windows Version: XP
CPU Type: p4
HDD: 360MB
Memory...
In the analog section for each channel enter the sky channel number in the 'Channel' field and set the source, SVHS #1 in my case.
In the analog section for each channel enter the sky channel number in the 'Channel' field and set the source, SVHS #1 in my case.
TV-Server Version: 0.3
MediaPortal Version: 0.2.3.0
MediaPortal Skin: blue two
Windows Version: xp pro sp2
CPU Type: Intel...
please delete this thread
please delete this thread
please delete this thread
I'm using the old FFDshow recommended on the MP homepage, but can I save my settings and import it to a new version, because it took a long time to adjust?
I'm using the old FFDshow recommended on the MP homepage, but can I save my settings and import it to a new version, because it...
TV-Server Version: 14/06/07 SVN
MediaPortal Version: 14/06/07 SVN
MediaPortal Skin: Wide Blue
Windows Version: XP
CPU Type...
I will try when I get home thanks!
I will try when I get home thanks!
I have installed the TV server, but each time I access my TV I get asked to enter server/IP-adress. When I have entered it, it says...
Hi,
no one with a clue?
This setup runs fine on 0.2.3.0 with TVengine2. Scanning, viewing and recording.
Why is there a problem in TV3? Is this a problem with the new BDA drivers for my TV-Card?
sloty
Hi,
no one with a clue?
This setup runs fine on 0.2.3.0 with TVengine2. Scanning, viewing and recording.
Why is there a...
Hi,
i just installed RC1 and thought i could try TV3 again (problems after it runs once fine, see previous posts)
I installed...
Great work, rtv! Thanks you very much. Update takes here on DSL for 2 weeks and ~30 Stations about 1 minute.
Great work, rtv! Thanks you very much. Update takes here on DSL for 2 weeks and ~30 Stations about 1 minute.
As of today there have been some changes to the tvserver's clickfinder plugin.
It now works like this:
- start a timer with...
The computer that creates the stream gets sound, all other comuters only get picture and no sound.
I have alot of computers so I do know that it's not a hardware or software problem on those, they are to differently installed and hardware are very different.
We have three laptops and two htpc and one "normal" computer. Plus the...
The computer that creates the stream gets sound, all other comuters only get picture and no sound.
I have alot of computers so I...
Hi!
This is just a quick question about a problem that I have had since I began using the TV-Server some months ago.
I have...
database tables
Help! Anybody? In which table in the SQL Express are the channels stored? Is it even possible to delete the channels directly in the database without corrupting MP?
database tables
Help! Anybody? In which table in the SQL Express are the channels stored? Is it even possible to delete the...
When I do a channel scan in TV-server I see all channels I want to see. When I jump to TV Channels in TV-server, some of the...
Maybe you forgot to activate and configure the powerscheduler client plugin?
Maybe you forgot to activate and configure the powerscheduler client plugin?
TV-Server Version:
MediaPortal Version: 0.2.2.0,SVN14683 + TVEngine3 SVN 14683
MediaPortal Skin: BlueTwo Wide
Windows Version...
You need some file from MediaPortal too, to compile the plugins as it references some MP dlls.
You can solve this by either checking out the sources of mp too and put them in:
TV_Server (check out dir)\ Mediaportal
and compile MP
or put the following files from MP:
- Core.dll
- Databases.dll
- Dialogs.dll
- Utils.dll
in the folder...
You need some file from MediaPortal too, to compile the plugins as it references some MP dlls.
You can solve this by either...
I try to compile the tv server (TVLibrary.sln) and i have no problem.
But when i try to compile the tvplugin (TVPlugin.sln) i...
TV-Server Version: 3 - Multi seat
MediaPortal Version: MP 0.2.3.0 - RC1
MediaPortal Skin: Blue Two
Windows Version: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
CPU Type: AMD Sempron(tm) Processor 2600+, MMX, 3DNow, ~1.6GHz
HDD: Maxtor 6L160M0 - 156.3 GB
Memory: 1024MB RAM...
TV-Server Version: 3 - Multi seat
MediaPortal Version: MP 0.2.3.0 - RC1
MediaPortal Skin: Blue Two
Windows Version: Windows XP...
TV-Server Version: 3 - Multi seat
MediaPortal Version: MP 0.2.3.0 - RC1
MediaPortal Skin: Blue Two
Windows Version: Windows XP...
I posed this over in the bug forum a few days ago. It has 32 views but no love so far. There are very few threads and no doc that I can find related to TVE3 and positioners. Is anyone succuessfully using the client and TVE3 to zap across 2 sats with a positioner? If so, can you please describe your setup, versions, tips, etc?
I posed this over in the bug forum a few days ago. It has 32 views but no love so far. There are very few threads and no doc that...
I posed this over in the bug forum a few days ago. It has 32 views but no love so far. There are very few threads and no doc that...
After some extensive research on DVBN I've discovered that the A8N-SLI motherboard has issues with their PCI slot version (They use a v2.3). It'll only support a 3.3v PCI card and the SS2 requires 5v. Sadly the connector accepts the SS2 without any issues and so you wouldn't think there'd be an issue.
I've RMAed the mobo and bought a...
After some extensive research on DVBN I've discovered that the A8N-SLI motherboard has issues with their PCI slot version (They use...
I obviously have an issue. When it occurs, my mouse locks up and eventually my monitor goes in to sleep (not set to do so even if I...
A lot of people are having trouble getting this card to work, including myself.
TV-Server 0.3 should recognise it providing you have installed the drivers correctly. Just check in Device Manager to ensure the BDA driver is installed and working properly.
Then when you get to the next hurdle (tuning channels), search the forums.
If you...
A lot of people are having trouble getting this card to work, including myself.
TV-Server 0.3 should recognise it providing you...
TV-Server Version: 0.3
MediaPortal Version: 0.2.3-rc1
My TV Card Compro Videomate t750 is not recognised by the TV server. Is...
TV-Server Version:
MediaPortal Version: TV-Server and MP with Latest SVN build
MediaPortal Skin: Project Mayhem III
Windows Version: Windows XP Pro SP2 (All Updates)
CPU Type: Intel Core 2 duo E6300
HDD: 1x 200GB + 1x 400GB
Memory: 2GB
Motherboard: ASUS: P5VD2-MX
Motherboard Chipset: Via
Motherboard Bios:
Video Card: ATI...
TV-Server Version:
MediaPortal Version: TV-Server and MP with Latest SVN build
MediaPortal Skin: Project Mayhem III
Windows...
TV-Server Version:
MediaPortal Version: TV-Server and MP with Latest SVN build
MediaPortal Skin: Project Mayhem III
Windows...
same problem here on 1 of 3 pcs
i reinstalled graphic driver and direct x and got a new quartz.dll ...
i still cant play any videos on this computer in mp...
same problem here on 1 of 3 pcs
i reinstalled graphic driver and direct x and got a new quartz.dll ...
i still cant play any...
I have set up a TV-Server Client and it appears to connect ok and I can see the TV Guide etc. However, there is no Video/Audio...
