Television (MyTV frontend and TV-Server) (54 Viewers)

Problems with the TV-Server or MyTV frontend? Post them in here.
TV-Server Version: 1.0 RC2 MediaPortal Version: 1.0 RC1 MediaPortal Skin: Project Mayhem III Windows Version: XP SP2 CPU Type: Intel P4 2.40 GHZ HDD: Samsung 300GB Memory: 1GB DDR Motherboard: Video Card: NVidia GF4-TI 4400 Video Card Driver: 91.31 Sound Card: Sound Card AC3: Sound Card Driver: 1. TV Card: AVERMEDIA...
TV-Server Version: 1.0 RC2 MediaPortal Version: 1.0 RC1 MediaPortal Skin: Project Mayhem III Windows Version: XP SP2 CPU Type...
TV-Server Version: 1.0 RC2 MediaPortal Version: 1.0 RC1 MediaPortal Skin: Project Mayhem III Windows Version: XP SP2 CPU Type...
Replies
0
Views
1K
Thanks for the info, that's does help to a degree. I just find it quite puzzling that no one has an easy method for backup/restore of their setup. If I may take a brief moment to show how I currently backup my HTPC system: My HTPC system is quite a puzzle spanning over 3 computers in the house and using a large number of...
Thanks for the info, that's does help to a degree. I just find it quite puzzling that no one has an easy method for...
There is very little information detailing just how to backup AND restore a media portal setup. I only use MP for TV viewing...
Replies
7
Views
1K
thanks tourettes, i think thats the problem, i have ffdshow installed, what other codec should i try? all other channels work good. do i need to change the codec for that specific channel? or for all of them? thanks again.
thanks tourettes, i think thats the problem, i have ffdshow installed, what other codec should i try? all other channels work good...
In a parallel spanish forum about htpc, we have notice that there are 2 spanish channels that dont have audio when watching it...
Replies
2
Views
1K
I think this is the best solution yet. Why not make this a part of mediaportals power scheduler?? I device manager on my tvserver there are 3 options in the wake up capabilities of the network card. 1 link change 2 pattern match 3 wake on lan If I use option 1 or 2 the server turns on and off the whole time even if I dont...
I think this is the best solution yet. Why not make this a part of mediaportals power scheduler?? I device manager on my...
I personaly can see absolutly no reason for this setting and so far it has caused more trouble than its worth. So can someone...
Replies
36
Views
8K
TV-Server Version: 1.0 RC2 MediaPortal Version: n/a MediaPortal Skin: n/a Windows Version: 2003 R2 CPU Type: Xeon 5150 HDD: iSCSI disk array Memory: 2GB Motherboard: Dell Server Video Card: integrated Video Card Driver: OS supplied Sound Card: n/a Sound Card AC3: n/a Sound Card Driver: n/a 1. TV Card: Black Gold 7162 Dual...
TV-Server Version: 1.0 RC2 MediaPortal Version: n/a MediaPortal Skin: n/a Windows Version: 2003 R2 CPU Type: Xeon 5150 HDD...
TV-Server Version: 1.0 RC2 MediaPortal Version: n/a MediaPortal Skin: n/a Windows Version: 2003 R2 CPU Type: Xeon 5150 HDD...
Replies
0
Views
1K
Hey I actually gave the wrong error log, that or the error has changed, could some one please tell me what is going on here with this one.. Thanks...
Hey I actually gave the wrong error log, that or the error has changed, could some one please tell me what is going on here with...
TV-Server Version: MediaPortal Version: MediaPortal Skin: Windows Version: CPU Type: HDD: Memory: Motherboard...
Replies
5
Views
1K
I think you just need to enable the remote in the media portal configuration. From memory I think it is down the bottom under keyboard/remote. Select MCE remote if this is the one you have. good luck
I think you just need to enable the remote in the media portal configuration. From memory I think it is down the bottom under...
Just upgraded to RC2. My remote stopped working it will start mp with mptray. but mediaportal is unresponsive. I even went as...
Replies
2
Views
1K
Im another one. Ive got RC2 running nicely on my single seat HTPC and have just installed the client on my laptop and I cant get anything going. The config takes about 5 minutes to close and when I select My TV on the client I have to wait another 5 minutes to only get the tv settings screen. What are we doing wrong ? [edit] Solved...
Im another one. Ive got RC2 running nicely on my single seat HTPC and have just installed the client on my laptop and I cant get...
Hi! I'm using MP tv server on (Intel 9300, 4 gb RAM, Asus 9600 GT, Hauppage pvr 5oo, Xi-fi Remote) my main computer, and...
Replies
2
Views
2K
The latest version of TV Server will now retry when the Twinhan driver fails to send the PMT to the CAM(the error "CAM failed 0x8007001F" was previously ignored). Interesting reading in this post, gives some ideas, could you explain more and post logs? - lars282 - it works all the time when you "added one channel with EPG" - zewe -...
The latest version of TV Server will now retry when the Twinhan driver fails to send the PMT to the CAM(the error "CAM failed...
Hi Sometimes my twinhan card fails to decode a scrambled channel and I was wondering what parameter I should try to increase first...
Replies
19
Views
5K
Seems an update to the latest skystar2 drivers has fixed this for me. I can't believe I wasted an entire week and that was all it was.
Seems an update to the latest skystar2 drivers has fixed this for me. I can't believe I wasted an entire week and that was all it was.
TV-Server Version: MediaPortal Version: 1.0 MediaPortal Skin: Aeon Windows Version: XP SP2 CPU Type: P4 2.8ghz HDD...
Replies
3
Views
3K
I was having a problem very similiar to this and an update to the latest Skystar2 drivers fixed it for me. TechniSat Digital: Software & Drivers
I was having a problem very similiar to this and an update to the latest Skystar2 drivers fixed it for me. TechniSat Digital...
Hi, i have a big problem with Skystar2 and TV-Server. The Signal is very good but TV Server does not find anything. Using the...
Replies
1
Views
2K
Glad im not the only one with this problem. lewsut, have you tested this in RC2 yet? I havent had a chance to see if the problem still exsists....
Glad im not the only one with this problem. lewsut, have you tested this in RC2 yet? I havent had a chance to see if the problem...
TV-Server Version: MP1 RC2 MediaPortal Version: MediaPortal Skin: Windows Version: Server 2008 CPU Type: AMD Athlon(tm) 64...
Replies
2
Views
2K
MP1 MP2 Freesat epg? DE
search for xmltv gui in google and that can download all the channel data via the radiotimes website.
search for xmltv gui in google and that can download all the channel data via the radiotimes website.
can any one point me to a walk though to setup a epg for freesat? thanks
Replies
3
Views
1K
TV-Server Version: MediaPortal Version: Latest weekly MediaPortal Skin: Windows Version: Vista SP1 CPU Type: Intel DC HDD: 2xFujitsu Silent 300GB Memory: 3gb DDR2 Motherboard: Asus Video Card: Nvidia 8500GT Video Card Driver: Latest Nvidia Sound Card: Sound Card AC3: Sound Card Driver: 1. TV Card: FloppyDTV 1. TV...
TV-Server Version: MediaPortal Version: Latest weekly MediaPortal Skin: Windows Version: Vista SP1 CPU Type: Intel DC HDD...
TV-Server Version: MediaPortal Version: Latest weekly MediaPortal Skin: Windows Version: Vista SP1 CPU Type: Intel DC HDD...
Replies
0
Views
1K
I solved it! Because we are using duo lnb's now I had to use diseqc setting simple a and simple b. Now I am trying to see HD
I solved it! Because we are using duo lnb's now I had to use diseqc setting simple a and simple b. Now I am trying to see HD
TV-Server Version: RC2 MediaPortal Version: RC2 MediaPortal Skin: Monochroom Windows Version: XP CPU Type: HDD: Memory...
Replies
5
Views
3K
Thank you, In fact I've a very large photo's collection, so I'll leave the module active for thumbinals creation.
Thank you, In fact I've a very large photo's collection, so I'll leave the module active for thumbinals creation.
TV-Server Version: MediaPortal Version: 1.0.0 RC2 + lastest svn MediaPortal Skin: Aeon Wide Windows Version: XP sp 3 CPU Type...
Replies
3
Views
1K
MP1 MP2 No Satelite Signal DE
Hi everybody, I've managed to fix the problem on my side :). My LNB setup in my STB and the original software which came with my Pinnacle PCTV DVB-S was Astra 19,2 LNB2 and Hotbird 13 LNB1. I've tried all different variations in the LNB setup within MP (but always resembling the above setup). After a while I mistakenly clicked...
Hi everybody, I've managed to fix the problem on my side :). My LNB setup in my STB and the original software which came with...
I've installed everything from scratch today, as shown in the Guidlines. But i can't scan for Channels, i get no signal at...
Replies
8
Views
3K
Hi Thanks for your reply. I have set the card up as hybrid, but alas this hasn't fixed any of the problems. I have decided that the software is too buggy to warrant spending any more time on. Perhaps in another year or so it might be usable. I did manage to get the DvbT working but no analog, radio (still says not supported) or...
Hi Thanks for your reply. I have set the card up as hybrid, but alas this hasn't fixed any of the problems. I have decided that...
This is just a general issue but I am trying to setup mediaportal to work with a Hauppauge HVR-4000 card and getting a vew small...
Replies
2
Views
2K
The setup took several minutes, I don't know how many MBs where copied to the disc/registry but it must be a lot. Even after closing MP there is still TV server and SQL server running taking more then 150 MB working memory together and there is no option to automatically shut it down. I wish things would be designed with efficiency...
The setup took several minutes, I don't know how many MBs where copied to the disc/registry but it must be a lot. Even after...
The setup took several minutes, I don't know how many MBs where copied to the disc/registry but it must be a lot. Even after...
Replies
0
Views
962
The channel switching is too slow (no probs with other DVB apps using KNC-1 DVB-C card), am I right to assume the problem relies in the client/server architecture and there is little room for improvement?
The channel switching is too slow (no probs with other DVB apps using KNC-1 DVB-C card), am I right to assume the problem relies in...
The channel switching is too slow (no probs with other DVB apps using KNC-1 DVB-C card), am I right to assume the problem relies in...
Replies
0
Views
1K
TV-Server Version: MediaPortal Version: RC2 MediaPortal Skin: Blue two wide. Windows Version: XP MCE SP3 CPU Type: E6300 Core two duo HDD: 2x160gb 1x500gb Memory: pc 6400 ddr2 2046mb Motherboard: Gigabyte GA-P35cDS3R Video Card: Ait 3650 Video Card Driver: CCC 8.7 Sound Card: On board Sound Card AC3: Sp-dif out for DVD...
TV-Server Version: MediaPortal Version: RC2 MediaPortal Skin: Blue two wide. Windows Version: XP MCE SP3 CPU Type: E6300 Core...
TV-Server Version: MediaPortal Version: RC2 MediaPortal Skin: Blue two wide. Windows Version: XP MCE SP3 CPU Type: E6300 Core...
Replies
18
Views
2K
DVB Owners Discussion Forum - dvbowners.com > Twinhan Dvb T See if you can find the driver recommended here.
DVB Owners Discussion Forum - dvbowners.com > Twinhan Dvb T See if you can find the driver recommended here.
Hi! I have a problem that drives me crazy. I have a TV card, Twinhan DVB-T, 878. No problem to install and update drivers...
Replies
1
Views
1K
TV-Server Version: MediaPortal and TV-Server 1.0 RC2 MediaPortal Version: MediaPortal and TV-Server 1.0 RC2 MediaPortal Skin: Blue Wide Windows Version: Windows XP SP3 CPU Type: AMD AM2 3600+ HDD: WD 400GB Memory: 2GB Kingston Motherboard: ASUS M2a-VM HDMI Video Card: onboard ATI x1200 series Video Card Driver: 8.342.0.0...
TV-Server Version: MediaPortal and TV-Server 1.0 RC2 MediaPortal Version: MediaPortal and TV-Server 1.0 RC2 MediaPortal Skin...
TV-Server Version: MediaPortal and TV-Server 1.0 RC2 MediaPortal Version: MediaPortal and TV-Server 1.0 RC2 MediaPortal Skin...
Replies
0
Views
1K
MP1 MP2 Hybrid card problem DE
edit: a complete reinstall of TV server fixed it, never mind.
edit: a complete reinstall of TV server fixed it, never mind.
edit: a complete reinstall of TV server fixed it, never mind.
Replies
0
Views
968
MP1 MP2 Htpcterver-help DE
No i did nothing, just selected the codec for my TV from Powerdvd8 :) I also read that you need a quiet good PC. My system: - ASUS P5K3 Premium WIFI Mobo - Intel Core 2 Quad (Q6600) - 4GB DDR2 RAM - ATI RADEON 2600 HD 512MB
No i did nothing, just selected the codec for my TV from Powerdvd8 :) I also read that you need a quiet good PC. My system: -...
TV-Server Version: 1.0.0.0 RC1 MediaPortal Version: 1.0.0.0 RC1 MediaPortal Skin: Blue Two 0.2.3.0 Windows Version: xp sp2...
Replies
31
Views
5K
External subtitles arent supported for DVDs.
External subtitles arent supported for DVDs.
Hello all, I have activated subtitles in MVK files with FFDSHOW and its working. I just have a problem with DVDR movies. Where...
Replies
1
Views
1K
I got it working - just edited the sky hd ini file and added the line to match the numbers above - scanned and it found them :-) Can this be added to the proper files and save anyone manually editing in the future? Here is my new ini file...
I got it working - just edited the sky hd ini file and added the line to match the numbers above - scanned and it found them :-)...
I have just done a channel scan on 28.2 2A, B, D, and then again on the Sky HD item to pickup all the sat channels, but the HD scan...
Replies
1
Views
1K
MP1 MP2 minor peeves in RC2 DE
HI rsbrux for point 1 - I think the reason you see duplicates in the configuration for the "Home" plugin is because there are 2 plugins for the affected items. For example there is a "My TV" plugin in both the windows plugins section and in the process plugins section. I have been meaning to ask why there are 2 instances and if...
HI rsbrux for point 1 - I think the reason you see duplicates in the configuration for the "Home" plugin is because there are 2...
1. For some time now, I find duplicates in the menu listing in the configuration for the "Home" plugin. 2. Audio CDs don't...
Replies
2
Views
1K
I solve the problem, i didn't search this forum well a gues. I've foud the sollution on this thread: https://forum.team-mediaportal.com/get-support-90/t-v-service-not-started-help-42962/ Thnx for you help.:thx:
I solve the problem, i didn't search this forum well a gues. I've foud the sollution on this thread...
TV-Server Version: MP RC2.0 + mediaportal-svn-07-25-2008--22-31-Rev19778 MediaPortal Version: MP RC2.0 +...
Replies
2
Views
1K
I had the same problem a few days ago with RC2 and newest SVN, but was not sure, if I had done something wrong. Basically I had the same setup: Two overlapping recordings on one transponder on card1 and in parallel a second recording on another transponder with card2. When the recording on card2 had finished, it also stopped the...
I had the same problem a few days ago with RC2 and newest SVN, but was not sure, if I had done something wrong. Basically I had the...
TV-Server Version: RC2/latest svn MediaPortal Version: RC2/latest svn MediaPortal Skin: Blue Two Wide Windows Version: Vista...
Replies
1
Views
931
Top Bottom