[fixed] no Cards available (1 Viewer)

[Sebastiii]

You can try again without complete installation to update using separate installer
start %temp% and you will find mediaportal dir and a deploy folder with installer (separate).
Maybe a file was not update correctly.

ofc if it will not work, clean install should be tested

 

[elliottmc]

Yes i stoped TV-Service before update. I Use 2xDVB-T and 1xDVB-S2.
I'll try a complete uninstall and reinstall next week.

Are the cards still showing in device manager?

Can you take a screenshot of the section of SetupTV where the cards should be showing, so that we can see what IS there?

 

[harryzwo]

Here are any Screenshots.

All TVCards are showed idle.

 

[elliottmc]

Are the channels correctly mapped to cards?

I would almost be inclined to delete all channels and rescan.

 

[harryzwo]

The Channels are Mapped. Rescan is not possible, because no Signal. Test with DVBViewwer is OK.

 

[elliottmc]

The Channels are Mapped. Rescan is not possible, because no Signal. Test with DVBViewwer is OK.

Is it possible that you have other software that is using the card, or at least a service (MCE services) that has a lock on the cards?

 

[harryzwo]

I have this Update tried twice. 1.2.3 function is OK -> Update to 1.3.0 no Cards. The envirement is exactly the same.

 

[mm1352000]

Hi harryzwo

It seems clear to me that there is a problem with the tuner reservation system - gibman will need to look at this.
Just on a hunch: it looks like the channel that you tried to tune had more than one tuning detail. Can you try to delete the other tuning details and map the channel to only one tuner and see if it makes a difference?

mm

 

[harryzwo]

I Don't understand. What are the Tuningdetails?? Is it enough to disable all Cards and enable only one? Should i delete all Channels before??

 

[mm1352000]

Hi again

I Don't understand. What are the Tuningdetails??

There is an example -->here<--. The channel that you tested has more than one tuning detail - at least one for DVB-T and one for DVB-S so that different types of tuners can tune it. Another way of saying it is that you combined the channels in the past, and now you need to un-combine them.

1. Open TV Server configuration.
2. Go to the TV Channels list.
3. Select one channel that you know does not work.
4. Click "edit".
5. Delete all except one of the tuning details (the rows) in the middle part of the screen.
6. Click OK.

Now try to tune the channel again.

Should i delete all Channels before??

No! Definitely don't do that - it is not necessary.

mm