Vista and EVR support (1 Viewer)

Status
Not open for further replies.

dman_lfc

Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    Ah... ok... I'll try the linked dll first.

    I'm using DivX 6.6.1

    DMAN
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    What SVN version can I use the DLL with?
    I get a side by side version conflict here...

    DMAN
     

    Eabin

    Retired Team Member
  • Premium Supporter
  • September 18, 2006
    465
    43
    you should be able to replace the dshowhelper.dll in any recent svn build (i'm using a build which is 2 or 3 days old, can't tell exact rev. atm.). what exactly do you mean by "side by side version conflict"?
     

    dman_lfc

    Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand
    This is with todays SVN15382...

    007-07-31 23:14:52.265259 [ERROR][MPMain]: VideoPlayer9:exception while creating DShow graph Unable to load DLL 'dshowhelper.dll': The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail. (Exception from HRESULT: 0x800736B1) at MediaPortal.Player.VMR9Util.EvrInit(IVMR9PresentCallback callback, UInt32 dwD3DDevice, IBaseFilter vmr9Filter, UInt32 monitor)
    at MediaPortal.Player.VMR9Util.AddVMR9(IGraphBuilder graphBuilder)
    at MediaPortal.Player.VideoPlayerVMR9.GetInterfaces()

    Gotta go - catch up with you later on this - keep up the good work.
    If you wanna add the latest changes into SVN - just grab one of the dev team.

    DMAN
     

    Eabin

    Retired Team Member
  • Premium Supporter
  • September 18, 2006
    465
    43
    i haven't seen this error message yet. i will try to find out more about it tomorrow (have to go to sleep now). you can try to search the internet for this error message in the meantime. good luck :)
     

    Broceliande

    Retired Team Member
  • Premium Supporter
  • April 26, 2006
    186
    2
    Hi eabin , i'll test tomorrow , you can reach me on Irc during the day , so that we can meet and put your changes in svn .
    dman said :
    Gotta go - catch up with you later on this - keep up the good work.
    If you wanna add the latest changes into SVN - just grab one of the dev team.

    In fact he just asked me to do it;)
     

    Laban

    Portal Pro
    July 1, 2007
    206
    18
    Luleå
    Home Country
    Sweden Sweden
    None of the HD channels work for me now. I get sound in one of the channels though but just a black screen. The other just locks up (black, no sound).

    I'm using the PowerDVD 7.x decoder. Haali media splitter. Nvidia 8500 GT.
     

    Eabin

    Retired Team Member
  • Premium Supporter
  • September 18, 2006
    465
    43
    Broceliande: no IRC at work, but the most important changes are in the sources.zip i attached a few posts above. the black-screen bug should also be fixed in current svn, but it seems that the dll that gets distributed with svn-setup is not up to date.

    Laban: to repeat myself: are you using current svn build, or the dll i attached a few posts back? because svn-version is broken atm.

    edit: if you are using my local-built dlls and still get black screens, could you please attach vmr9.log and mediaportal.log
     

    Laban

    Portal Pro
    July 1, 2007
    206
    18
    Luleå
    Home Country
    Sweden Sweden
    I'm using your dll.

    Perhaps this will help you:

    Code:
    2007-08-01 12:40:37.902290 [Info.][MPMain]: window:TvPlugin.TvFullScreen init
    2007-08-01 12:40:37.940373 [Info.][MPMain]: xml:C:\Program Files\Team MediaPortal\MediaPortal\Skin\BlueTwo wide\tvOSD.xml image id:350 width:0 height:0 gfx:-
    2007-08-01 12:40:37.982363 [Info.][MPMain]: PlaneScene: crop T, B  : 10, 10
    2007-08-01 12:40:37.982363 [Info.][MPMain]: PlaneScene: crop L, R  : 0, 0
    2007-08-01 12:40:37.982363 [Info.][MPMain]: PlaneScene: video WxH  : 720x576
    2007-08-01 12:40:37.982363 [Info.][MPMain]: PlaneScene: video AR   : 16:9
    2007-08-01 12:40:37.983339 [Info.][MPMain]: PlaneScene: screen WxH : 1280x767
    2007-08-01 12:40:37.983339 [Info.][MPMain]: PlaneScene: AR type    : Normal
    2007-08-01 12:40:37.983339 [Info.][MPMain]: PlaneScene: PixelRatio : 0,9998
    2007-08-01 12:40:37.983339 [Info.][MPMain]: PlaneScene: src        : (0,10)-(720,566)
    2007-08-01 12:40:37.983339 [Info.][MPMain]: PlaneScene: dst        : (0,24)-(1280,744)
    2007-08-01 12:40:46.727897 [Info.][MPMain]: Planescene(720,576,16,9,152392608,True,8):Unhandled exception in Fel i tillämpningsprogrammet. Microsoft.DirectX.Direct3D    vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.Present()
       vid MediaPortal.Player.PlaneScene.InternalPresentSurface(Int32 width, Int32 height, Int32 arWidth, Int32 arHeight, Boolean InRepaint)
    2007-08-01 12:40:46.805040 [Info.][MPMain]: Planescene(720,576,16,9,152392608,True,8):Unhandled exception in Fel i tillämpningsprogrammet. Microsoft.DirectX.Direct3D    vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.Present()
       vid MediaPortal.Player.PlaneScene.InternalPresentSurface(Int32 width, Int32 height, Int32 arWidth, Int32 arHeight, Boolean InRepaint)
    2007-08-01 12:40:46.884137 [Info.][MPMain]: Planescene(720,576,16,9,152392608,True,8):Unhandled exception in Fel i tillämpningsprogrammet. Microsoft.DirectX.Direct3D    vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.Present()
       vid MediaPortal.Player.PlaneScene.InternalPresentSurface(Int32 width, Int32 height, Int32 arWidth, Int32 arHeight, Boolean InRepaint)
    2007-08-01 12:40:46.904643 [Info.][MPMain]: Planescene(720,576,16,9,152392608,True,8):Unhandled exception in Fel i tillämpningsprogrammet. Microsoft.DirectX.Direct3D    vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, IntPtr overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.PresentInternal(tagRECT* sourceRectangle, tagRECT* destRectangle, Control overrideWindow)
       vid Microsoft.DirectX.Direct3D.Device.Present()
     

    Laban

    Portal Pro
    July 1, 2007
    206
    18
    Luleå
    Home Country
    Sweden Sweden
    Hmm, not sure that the above error was related to this, here's the mediaportal.log file from a "clean" session where i just started to watch a HD channel.

    Can't find the wmr9.log file. Where should that file be located ?
     
    Status
    Not open for further replies.

    Users who are viewing this thread

    Similar threads

    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
    I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV...
    Hi everyone, I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
    Replies
    8
    Views
    1K
    I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't trust AI and this may not be correct) was that HDR is encoded with the HEVC codec and I know MePo uses the HEVC codec to play 4K UHD Blue-ray discs. So, there is at least the possibility that it will work...
    I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't...
    Does MePo 1 pass the HDR metadata, Dolby Vision, HDR10, etc., along to the display when playing 4K UHD Blu-ray discs? If not, are...
    Replies
    2
    Views
    1K
    MP1 MP2 TVGuide Users DE
    Greetings Fellow MP'rs. Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it is set up for use with MediaPortal..? I havebeen using Zap2XML / GraceNote but that just died (for me alone seemingly) and I am out of listings. :( Would appreciate any help - Thanks.
    Greetings Fellow MP'rs. Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it...
    Greetings Fellow MP'rs. Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it...
    Replies
    0
    Views
    763
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others) have been using the latest NewZap2xml_6 and it has worked flawlessly. A few days ago it all died. I wonder if anyone is working a solution to save the masses. I am hoping the good citizen of past is...
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others)...
    Greetings to all Denizens of the land of MediaPortal... It seems our Zap2XML/GraceNote access is broken again. I (as many others)...
    Replies
    0
    Views
    770
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback. If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo. I have...
    I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ? MP(1) will only use LAV if you select...
    Not sure if this a a bug/config/settings problem. I am running a media portal 2.5 server with 2.41 client but it seems I get the...
    Replies
    1
    Views
    655
    Top Bottom